What is the fuel tank capacity of the Lamando 230 in liters?

2 Answers
BethanyAnn
09/07/25 3:56am
The fuel tank capacity of the Lamando 230 is 51 liters, which is the officially announced data. Owners who have purchased the Lamando 230 can also check this information on the vehicle's configuration sheet. The Lamando 230 requires 95-octane fuel, with a fuel consumption of 5.4L per 100 kilometers. A full tank of fuel can cover a distance of 944km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. The fuel level is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow from the tank's safe space. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
19
1
Share
OIsabel
09/19/25 3:20am
The fuel tank capacity of the Lamando 230 is 50 liters as standard. I've been driving this car for several years, and it handles daily commutes and weekend short trips without any issues. A full tank typically allows me to drive over 500 kilometers, making it ideal for urban commuting. When refueling, I make it a habit to regularly check the fuel gauge to ensure it doesn't drop into the red zone, which helps prolong the fuel pump's lifespan. On highways, I keep the tank at least half full for better stability, with a reasonable fuel consumption of around 7 liters per 100 kilometers. It's important to ensure the fuel cap is tightly sealed to minimize evaporative emissions, and during regular maintenance, I ask the technician to inspect the fuel system for any potential leaks.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

How Many Points Are Deducted for Not Wearing a Seat Belt While Driving?

Driver not wearing a seat belt will be deducted 2 points, while passengers not wearing seat belts will not be penalized. According to Article 51 of the "Regulations for the Implementation of the Road Traffic Safety Law": When a motor vehicle is in motion, the driver and passengers must use seat belts as required, and motorcycle drivers and passengers must wear safety helmets as required. Introduction to seat belts: 1. Concept: A seat belt is a vehicle safety device designed to protect vehicle occupants from harmful movements that may occur during a collision or sudden stop. 2. Function: The role of a seat belt is to reduce the likelihood of death or serious injury in traffic collisions by minimizing the secondary impact forces that pose internal collision risks. It ensures proper positioning of occupants to maximize the effectiveness of airbags and prevents occupants from being ejected from the vehicle or experiencing rollovers during a collision.
19
0
Share

How Severe Is the Damage When Scraping the Car Undercarriage?

Scraping the car undercarriage can result in varying degrees of damage. When driving on different road surfaces, speed bumps and potholes are potential "killers" for the car undercarriage. The most vulnerable parts of the undercarriage are the fuel tank, engine oil pan, and brake system fluid lines. If you notice oil leakage or unusual noises after scraping the undercarriage, it may indicate significant damage. Ways to prevent undercarriage scrapes: 1. Pay attention to driving habits: Slow down when driving on uneven roads and be extra cautious of curbs, speed bumps, and potholes. 2. Apply undercarriage coating: You can spray an undercarriage protective coating. This coating effectively shields the undercarriage from flying stones, gravel, and minor scrapes.
2
2
Share

What Happens If You Don't Shift Gears While Driving?

Both torque and power will decrease after the engine speed reaches a certain point. Therefore, if you don't shift gears while driving, as the throttle opening increases, the engine speed will rise, but the traction force will gradually decrease. Eventually, when the engine speed reaches its maximum, the vehicle speed will stabilize at a certain level and no longer increase. Under these conditions, the fuel consumption of the car at the same speed will be significantly higher than that of a normally driven vehicle. Gear shifting technical requirements: 1. Timely: Master the appropriate gear shifting timing—neither upshifting too early nor downshifting too late. 2. Correct: The coordination between the clutch pedal, accelerator pedal, and gear lever must be accurate and synchronized, with precise positioning. 3. Smooth: After shifting into a new gear, release the clutch pedal promptly and smoothly. 4. Swift: The action should be quick to minimize gear shifting time, reduce kinetic energy loss, and lower fuel consumption.
8
2
Share

Is It Safe to Drive Through Water Without Stalling?

Driving through water without stalling doesn't mean it's completely safe; it only indicates that the engine might be fine. Cars are not amphibious vehicles. While many components have waterproof designs, there's still a possibility of water ingress or moisture damage. After driving through water, it's best to get out and inspect the engine compartment, engine air intake, wheels, brake discs, exhaust pipe, carbon canister, and other areas for any foreign objects to ensure safety for the next drive. Potential hazards of driving through water: 1. Engine damage: Water entering the engine can cause issues like insufficient power and shaking. Prolonged use may lead to piston rod deformation or even breakage, ultimately damaging the engine. 2. Stalling: A wet or short-circuited high-voltage distribution system can cause stalling. Water entering the exhaust pipe can also lead to stalling.
12
5
Share

Is It Normal to Have Minor Scratches While Driving?

Having minor scratches while driving is a very common phenomenon. Especially for novice drivers, as the saying goes, "All things are difficult before they are easy," no one can drive skillfully on their first try. It requires step-by-step accumulation of experience. Therefore, it's essential to face this issue correctly, with the key being to learn how to adjust one's mindset and absorb lessons, thereby gaining more driving experience. Guide for New Drivers: 1. Maintain a Good Mindset: When new drivers first hit the road, they often feel nervous, which can lead to stiff movements and mistakes in moments of panic. Thus, it's crucial for beginners to adjust their mindset before driving. 2. Maintain a Safe Following Distance: While driving, always observe the distance between your car and the vehicles in front and behind, especially on highways. It's important to understand that both new and experienced drivers need time to react. Therefore, maintaining a safe distance is necessary to avoid minor scratches.
12
3
Share

Why does the accelerator feel heavy and resistant when driving?

Driving with a heavy and resistant accelerator pedal may be due to issues with the engine's oil and electrical circuits, a dirty fuel injector, or excessive debris at the bottom of the fuel tank. It is recommended to visit a 4S shop for cleaning. There are two types of accelerator pedals: 1. Floor-mounted pedal: With the pivot point located at the bottom of the pedal, the entire foot can rest on it. The pedal itself serves as a fulcrum, allowing the calf and ankle to control the pedal more effortlessly, thereby improving precision and reducing fatigue. When paired with a manual transmission, the floor-mounted pedal also makes it easier to perform heel-and-toe techniques. 2. Hanging-type accelerator pedal: With the pivot point at the top of the bracket, the lower structure is relatively simpler. This design allows for a lighter touch and can be made with a metal rod for the pedal bracket, significantly reducing costs. As a result, most manufacturers prefer this type of pedal.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.