What is the fuel tank capacity of the Kia Stonic?

1 Answers
EmiliaFitz
07/29/25 9:08pm
The fuel tank capacity of the Kia Stonic is 43 liters, as officially announced by the manufacturer. The Kia Stonic uses 92-octane fuel, with a fuel consumption of 5.7-5.8L per 100 kilometers. A full tank can provide a driving range of 741-754 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately displayed on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, and there is additional space from the safe fill level to the tank opening. This extra space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
3
1
Share
More Forum Discussions

What Causes a Car Engine to Fail to Start?

The reasons why a car engine fails to start include the following: 1. Low temperature, which usually occurs in winter. In such conditions, the viscosity and rotation speed of the car's engine oil decrease, and the battery's ignition energy is reduced, making it difficult to form flammable gases and thus hard to start the engine. 2. Damaged or non-functional spark plugs. Spark plugs are a critical component of the car's ignition system, and the ignition system is key to whether the car's heart (engine) works or not. Therefore, whether the spark plugs can function properly directly affects the vehicle's performance and efficiency. 3. Dead battery. This could be due to reasons like leaving the headlights on for too long, resulting in a drained battery, or the battery's lifespan has expired. It is generally recommended to replace the battery every 2 years. 4. Incorrect gear position. For automatic transmission cars, the gear must be in P (Park) or N (Neutral) when starting. If it's in R (Reverse) or D (Drive), the engine won't start. Some manual transmission cars may also fail to start if the clutch is not depressed.
7
4
Share

Does idling with the AC on damage the car?

Idling with the AC on is a normal operating condition during vehicle use. Automobiles are designed and manufactured to account for various usage scenarios, so this practice does not cause significant harm but rather constitutes normal wear. However, there are several potential hazards of idling with the AC on: 1. Idling with the AC on produces more harmful exhaust emissions compared to driving with the AC on, as idling represents the most challenging engine operating condition where gasoline combustion is relatively incomplete, resulting in higher emissions of carbon monoxide, hydrocarbons, nitrogen oxides, and other harmful gases. 2. If not properly managed, idling with the AC on can cause harm or even fatalities to vehicle occupants. There are two main risks: oxygen deprivation/asphyxiation and carbon monoxide poisoning. When idling with the AC on, always park in an open area and never remain in the vehicle for extended periods in enclosed spaces, as exhaust fumes containing carbon monoxide can enter the cabin and easily lead to carbon monoxide poisoning.
6
4
Share

What procedures are required for a six-year driver's license renewal?

The procedures required for a six-year driver's license renewal: two copies of the driver's ID card, two recent 1-inch bareheaded color photos, the original ID card, the original driver's license, and a medical examination certificate from a county-level or above hospital. Methods for renewing an expired driver's license: Vehicle Management Office renewal process: The motor vehicle driver should bring the required materials to the Vehicle Management Office where the driver's license was issued to apply for renewal. The Vehicle Management Office will process the renewal within one working day after approval. Renewal via the "Traffic Management 12123" APP. Download the "Traffic Management 12123" APP, then select Service Center -- Expired License Renewal Service -- Fill in the information. The new license is usually delivered by mail. Visit the "Police-Medical-Post" service point at a postal business hall for renewal processing. The entire process, from registration and medical examination to the production of the new license, takes only half an hour. Currently, only a few cities have this service, such as Hangzhou.
12
5
Share

Can 92 Ethanol Gasoline and 92 Regular Gasoline Be Mixed?

92 ethanol gasoline and 92 regular gasoline can be mixed temporarily without causing significant harm to the vehicle. However, long-term mixing may have certain impacts. Below is more information about 92 ethanol and 92 gasoline: 1. Ethanol gasoline is a new alternative energy source formed by blending fuel ethanol (processed from grains and various plant fibers) with regular gasoline in a specific ratio. According to China's national standards, ethanol gasoline consists of 90% regular gasoline and 10% fuel ethanol. Ethanol is a renewable energy source, produced through the fermentation of crops such as sorghum, corn, and potatoes. 2. 92 gasoline refers to gasoline with an octane rating of 92, suitable for mid-range vehicles. Considering the current production, storage, transportation, and usage of gasoline products, as well as the technological transformation needs of oil product manufacturers and vehicle emission control requirements, its main indicators are comparable to current European standards. It meets the requirements of China's Phase V vehicle pollutant emission standards, helps reduce vehicle emissions, and plays a significant role in environmental protection and improving air quality.
11
5
Share

What does the M gear mean?

m gear is the manual mode of an automatic transmission. When the driver manually pushes the gear lever to M+ or M-, it sends commands to the transmission computer to upshift or downshift. The computer then controls the transmission to shift gears as required, simulating the feeling of manual shifting. The techniques for using the M gear in a manual-automatic transmission are as follows: 1. Downshifting to overtake: When overtaking, if in D gear, the vehicle speed will not increase rapidly by pressing the accelerator hard, and you can only overtake by sequentially upshifting. However, when switching to M gear and pressing the accelerator, the vehicle can utilize the high torque of a lower gear to accelerate instantly, completing the overtaking action more quickly. 2. Descending a slope: When going down a long slope, if driving an automatic transmission, the vehicle speed will uncontrollably keep increasing, and you can only apply the brakes at the right time while coasting. But if you engage the manual mode when descending a slope and pull the gear lever backward to shift into a lower gear, you can fully utilize engine braking to reduce speed. When reaching the bottom of the slope, you can quickly upshift or switch back to automatic mode, resuming normal driving promptly. 3. Ascending a slope: Use the manual mode of the manual-automatic transmission to limit the gear to 1st to handle frequent slope starts. This operation also protects the transmission.
15
2
Share

Can a Leaking Car Shock Absorber Be Repaired?

If a car shock absorber is leaking or deformed, it generally cannot be repaired and needs to be replaced entirely, as there are no individual repair parts or tools available for purchase. If damaged, it should be replaced promptly. There are several methods to inspect faults in car shock absorbers: 1. Drive the car on rough road conditions for 10km, then stop and touch the shock absorber housing. If it is not hot enough, it indicates there is no internal resistance, meaning the shock absorber is not working. In this case, add an appropriate amount of lubricating oil and test again. If the housing becomes hot, it means the shock absorber lacks oil internally and should be refilled. Otherwise, the shock absorber has failed. 2. Press down hard on the bumper and then release it. If the car bounces 2-3 times, the shock absorber is working well. 3. If the car vibrates severely during slow driving followed by emergency braking, the shock absorber may have issues. 4. Remove the shock absorber, stand it upright, and clamp the lower connecting ring in a vise. Pull and press the shock absorber rod several times with force. There should be stable resistance, with the upward pull resistance greater than the downward press resistance. If the resistance is unstable or absent, the shock absorber may lack oil internally or have damaged valve components, requiring repair or part replacement.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.