What is the fuel tank capacity of the Kia K4 in liters?

1 Answers
SanLucas
07/30/25 2:42am
The Kia K4 has a fuel tank capacity of 62L. It is equipped with 1.8L, 2.0L, and 1.6T engines. The 1.8L and 2.0L models are paired with either a 6-speed manual or 6-speed automatic transmission, while the 1.6T model comes with a 7-speed dual-clutch transmission. All models feature front-engine, front-wheel drive. In comparison, the Highlander has a fuel tank capacity of 60 liters, and the Haval H6 has a fuel tank capacity of 58 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E (Empty) and F (Full). When the needle is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient.
Was this review help?
6
5
Share
More Forum Discussions

Can the Power Tailgate Be Closed Manually?

Models equipped with power tailgates cannot be closed directly by hand. Here is the relevant information: 1. Principle of Power Tailgate Composition: The basic structure of a power tailgate consists of two core-driven rods. The drive rod, via a spindle drive, is composed of an inner tube and an outer tube. The motor and gear inside the inner tube drive a threaded spindle, which moves along a threaded nut fixed to the inner side of the outer tube. The electric strut uses an electric spindle located inside the motor within the strut to open and close the trunk lid, with springs assisting in the opening operation. 2. Avoid Manual Closing: Models with power tailgates should not be closed directly by hand, as this can cause excessive wear on the internal motor, gears, and telescopic components, thereby reducing their lifespan. It is best to use the switch for opening and closing.
18
3
Share

What is the minimum ground clearance of the Toyota Levin?

Toyota Levin's minimum ground clearance is 105mm. The minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding wheels) and the supporting surface when fully loaded or stationary, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The Toyota Levin is a compact sedan under GAC Toyota, with body dimensions of 4645mm in length, 1775mm in width, and 1480mm in height, and a wheelbase of 2700mm. The Toyota Levin is equipped with a 1.8L naturally aspirated engine, delivering a maximum power of 73kW, a maximum torque of 152Nm, with the maximum power achieved at 5200 rpm and the maximum torque at 4000 rpm.
1
0
Share

What are the seven-seater models available from Toyota?

Toyota's seven-seater models include the Prado, Highlander, Vellfire, Fortuner, Previa, 4Runner, Alphard, and Toyota Sequoia. Taking the Toyota Rush as an example, it is a compact SUV with dimensions of 4435mm in length, 1695mm in width, and 1705mm in height, with a wheelbase of 2685mm. Under the hood, it is powered by a 1.5L four-cylinder engine delivering a maximum horsepower of 103 PS and a peak torque of 140 Nm, paired with either a 5-speed manual transmission or a 4-speed automatic transmission. It features a 7-inch multimedia screen with smartphone connectivity, along with standard equipment such as vehicle stability control, hill-start assist, and keyless entry.
9
1
Share

What is the approximate load capacity of a truck?

The load capacity of a truck should be specifically divided according to the carrying tonnage of the truck. The specific classifications are as follows: 1. Mini truck: total mass less than 1.8 tons. 2. Light truck: total mass between 1.8 to 6 tons. 3. Medium truck: total mass between 6 to 14 tons. 4. Heavy truck: total mass between 14 to 100 tons. 5. Super heavy truck: total mass over 100 tons. The following is related content introduction: Types of trucks: Trucks, also known as lorries, are mainly used for transporting goods. Sometimes they also refer to vehicles that can tow other vehicles, belonging to the category of commercial vehicles. Generally, they can be divided into heavy and light types based on the vehicle's weight.
15
5
Share

What is the real reputation of the BJ40?

BJ40's reputation is not very good. On December 28, 2013, at the China National Aquatics Center "Water Cube", Beijing Auto's first stylish hardcore off-road vehicle, the Beijing 40 (BJ40), was officially launched. The models released included the Cross Version, Expedition Version, and Cool Wild Version, offering consumers six body color options: Molten Rock Red, Danxia Red, Everest White, Aurora Green, Hill Green, and Polar Night Black. Here are the detailed specifications: 1. Interior: As an off-road vehicle, it doesn’t feature luxurious decorations but adopts a simple and rugged design style reminiscent of the "Wrangler." The switches for the windows and central locking are designed as toggle levers, giving a very retro feel. 2. Powertrain: The Beijing Auto BJ40 is equipped with a 2.4L naturally aspirated engine, delivering a maximum power of 105kW and a peak torque of 217Nm, paired with a 5-speed manual transmission. The vehicle also features a mechanical part-time four-wheel-drive system and adopts a body-on-frame structure. Additionally, the rear suspension of the Beijing Jeep BJ40 uses a five-link non-independent setup, providing better support for extreme off-roading. 3. Features: The Beijing Auto BJ40 is positioned as a hardcore SUV. Its body dimensions are 4350mm in length, 1843mm in width, and 1837mm in height, with a wheelbase of 2450mm—almost identical to the two-door Wrangler. The rear seats can be fully folded down, offering impressive space and enhancing comfort for drivers on the go.
14
2
Share

What Does a Clean Exhaust Pipe Indicate?

A clean exhaust pipe indicates that the vehicle has been driven very little, or that the combustion inside the engine is very efficient. Additional information: 1. Reasons for a blackened exhaust pipe: The exhaust pipe turns black due to the presence of unburned fuel mixture in the exhaust gases, which over time causes the pipe to blacken. A blackened exhaust pipe is normal and should not be used as a sole indicator of the engine's working condition. 2. Measures to reduce exhaust pipe blackening: To maintain the engine in good condition, it is essential to follow regular maintenance schedules, use high-quality gasoline, and ensure the correct gasoline grade is used. Prolonged use of low-quality gasoline can lead to increased carbon deposits in the engine. Excessive carbon buildup may cause engine knocking, which reduces engine power and increases fuel consumption. Knocking is an abnormal combustion phenomenon in the engine, occurring when the piston is in the compression stroke, compressing the air-fuel mixture. During this process, the temperature and pressure of the mixture rise.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.