What is the fuel tank capacity of the Jialing 70?

1 Answers
DelSteven
07/29/25 11:00pm
The fuel tank capacity of the Jialing JH70 underbone motorcycle is approximately 3.5 liters. Underbone motorcycles generally have smaller fuel tanks, with most capacities ranging between 3.5 to 4.0 liters. Avoid refueling when the low fuel light is on: Before driving, check the fuel gauge and calculate whether refueling is necessary based on the trip distance and the fuel gauge reading. It's advisable to refuel in advance rather than waiting for the low fuel light to come on. The fuel pump is located inside the tank and operates at high temperatures during continuous use. Being submerged in fuel helps cool it effectively. When the low fuel light is on, it indicates the fuel level is below the pump. Consistently waiting until the light comes on to refuel can shorten the fuel pump's lifespan. Additionally, having too little fuel in the tank may cause the pump to overheat and fail. Choose to refuel in the morning or evening: Generally, temperatures are lower in the early morning and evening, and gasoline has a lower vaporization point. Therefore, it's best to refuel during these times. Gasoline expands with heat and contracts with cold, and it is sold by volume. At lower temperatures, gasoline has a higher density, meaning more mass per unit volume, resulting in more fuel for the same volume. Avoid filling the tank completely for city driving: When driving in the city, there's no need to fill the tank completely. A full tank adds extra weight to the engine, increasing fuel consumption. Since refueling is convenient in urban areas, it's unnecessary to keep the tank full.
Was this review help?
4
5
Share
More Forum Discussions

What happens when the wheel cylinder fails?

The following situations may occur when the wheel cylinder fails: Abnormal noise during braking: When applying the brakes while driving, the braking system may emit a sharp and harsh metal friction sound. This could be caused by thin brake pads, poor-quality brake pads, foreign objects in the brake pads, or rust on the brake discs. In most cases, pressing the brakes a few more times can alleviate the noise. Brake shudder: During emergency braking, you may feel the brake pedal "kicking back" with a sensation like "thump, thump, thump." This is normal and indicates that the ABS is functioning. Soft brakes: When braking while driving, the deceleration is weak, and the braking distance is long. The causes of poor braking performance in a hydraulic braking system can generally be judged based on the brake pedal travel, the feel of the pedal (soft or hard), and the stability after pressing the brake pedal.
4
3
Share

What does 240TGDi mean?

240TGDi is a car produced by Beijing Hyundai. Below is an extended introduction to it: Brand Introduction: The LA FESTA, a sports sedan under Beijing Hyundai, is positioned as a 'high-performance, tech-charming vehicle' and is a high-performance sports sedan specifically designed for the Chinese market. It is the first mass-produced car to adopt Hyundai's global latest Sensuous Sportiness design concept, combining both sportiness and fashion. In terms of power: 1.4T displacement, maximum power of 103kW, maximum torque of 242N.m, 7-speed dual-clutch transmission, 5.4L/100km
13
5
Share

What are the differences between Jetta and Santana in Subject 2?

Subject 2 Jetta and Santana differences are as follows: Appearance differences: The most obvious difference between the two cars is reflected in the front face design. Although both adopt Volkswagen's family-style design, subtle adjustments in the front grille color scheme, bumper, and taillight shape create slightly different visual effects. The Santana's front face gives a more stable impression, while the Jetta appears younger and more energetic. The Santana's headlights have a more regular shape, while the Jetta's are more angular. Body size differences: The difference between the two cars is minimal. Both have a wheelbase of 2603mm and a width of 1706mm. The Jetta is 14mm longer than the Santana, which is the most significant difference in body size data. Reverse gear operation difference: The difference between Jetta and Santana lies in the reverse gear operation. The Jetta's reverse gear is in the first gear position, requiring the gear lever to be pressed down before engaging, while the Santana does not require this.
17
0
Share

Can part-time 4WD in 4H mode make turns?

Part-time 4WD in 4H mode can make turns, but it cannot turn on paved roads; turns can only be made in 4H mode on unpaved roads. The main reason is that the turning radius of the front and rear wheels is different, so when the vehicle needs to turn, there must be a speed difference between the front and rear wheels. The heavier the vehicle, the better its stability at high speeds. Other factors affecting a vehicle's stability at high speeds include: Vehicle tires: Tires are the only components in contact with the ground. Generally, wider and flatter tires provide better stability at high speeds; Vehicle shape: The vehicle's shape also affects its high-speed stability. The more aerodynamic the vehicle, the better its stability at high speeds; Drive configuration: Most vehicle drive configurations include front-wheel drive, rear-wheel drive, and four-wheel drive. Four-wheel drive vehicles are more stable than two-wheel drive vehicles; Suspension system: Generally, vehicles with independent suspension systems are more stable than those with non-independent suspension systems. Independent suspensions include MacPherson strut independent suspension and multi-link independent suspension.
11
5
Share

What are the requirements for purchasing a new energy vehicle without a Shanghai household registration?

The following are the requirements for purchasing a new energy vehicle without a Shanghai household registration: Credit investigation: After placing an order at a 4S store, the owner's personal information will be submitted to the Shanghai New Energy Vehicle Promotion Leading Group for a credit check, including credit card and loan repayment records. Generally, there will be no issues as long as there are no records of malicious defaults or negative information such as drunk driving. Proof of charging pile installation from the property management: Usually, the owner needs to have a fixed parking space or a long-term leased parking space. There are cases where the property management does not cooperate, in which case the 4S store will need to provide corresponding "solutions." Installation of the electric meter and charging pile: After obtaining approval from the property management, the owner can apply to the power company to install an electric meter and then contact a charging pile construction company to install the charging pile. Most 4S stores have fixed partnerships with charging pile installation companies and will help the owner arrange the installation. Charging pile qualification review: After the charging pile is installed, a certificate will be provided to the owner. The owner must submit this certificate to the 4S store, which will then forward the documents to the New Energy Vehicle Promotion Group Office. The office will verify the installation of the charging pile, and as long as the installation is properly completed, the review will be passed.
15
4
Share

What is the reason for the erratic jumping of the door lock latch on the 2011 Buick Excelle?

The reason for the erratic jumping of the Excelle's door lock latch is the damage to the small switch inside the central control motor of the left front door. Below are the relevant details about the central locking system: Central Locking System: The full name of the central locking system is Central Control Door Lock, which is an automotive accessory. Using this lock allows for remote opening and locking of doors without inserting the key into the lock cylinder. It consists of the door lock switch, actuator, and controller. Main Functions: It is divided into central control, speed control, and individual control. Central control means that when the driver locks the door next to them, all other doors are simultaneously locked. The driver can use the door lock switch to open all doors at once or open a specific door individually. Speed control means that when the vehicle reaches a certain speed, all doors automatically lock to prevent passengers from accidentally opening the door by operating the door handle. Individual control refers to the presence of separate spring lock switches on doors other than the driver's side, allowing for independent control of the opening and locking of a single door.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.