What is the fuel tank capacity of the Hongqi HS7?

1 Answers
MacRuth
07/25/25 2:24am
The fuel tank capacity of the Hongqi HS7 is 75 liters, as officially announced. Owners who have purchased the Hongqi HS7 can also check this information on the vehicle's configuration sheet. The Hongqi HS7 requires 95-octane fuel, with a fuel consumption of 8.6 to 10.9 liters per 100 kilometers. A full tank can cover a distance of 688 to 872 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
Was this review help?
6
3
Share
More Forum Discussions

How Thick Should Homemade Car Jumper Cables Be?

For general household cars, it is recommended to use copper wires with an outer diameter of 10mm or more. Here is the relevant information: 1. Introduction: Car jumper cables are usually about 3 meters long, not too long as increased resistance will consume power; nor too short, as it will be difficult to connect. 2. Function: When a car battery is low on power, it affects the entire vehicle's power supply system, making it difficult to start the car. If the car stalls midway and cannot be restarted, calling for a tow truck can be expensive. In such cases, jumper cables from another car can be used for emergency assistance. If the battery is low on power, the car should start quickly. After starting, keep the engine running for 15 to 20 minutes to allow the alternator to recharge the battery.
12
2
Share

How to Deal with a Leaking Car Sunroof?

It is necessary to check the drainage holes and determine whether the sunroof drainage holes are blocked by observing the drainage situation. If it is confirmed that the car's drainage pipe is clogged, promptly visit a professional repair shop for treatment to avoid greater losses. A leaking car sunroof may also be caused by aging sealing strips, which should be inspected in a timely manner. The methods to prevent sunroof leakage are as follows: 1. Regularly inspect the sunroof's drainage outlets: The drainage outlets of a car sunroof are an important pathway for water drainage. If not cleaned for a long time, the drainage holes can easily become blocked, leading to water seepage. It is necessary to regularly inspect the sunroof's drainage outlets and promptly remove any dust or fallen leaves to ensure normal drainage. 2. Regularly inspect the sunroof's guide rails: Due to lack of attention during use, sand, fallen leaves, and other debris may accumulate on the sunroof guide rails. If not cleaned for a long time, the guide rails can be damaged, preventing the sunroof from closing properly and causing leaks. 3. Regularly inspect the sunroof's sealing strips: With prolonged use, the sealing strips of the sunroof may age. When the sealing strips are severely aged, the car sunroof may start to leak. 4. Try not to open the sunroof on bumpy roads: It is advisable to avoid using the car sunroof on bumpy roads, as such conditions can easily deform the sunroof guide rails, affecting their normal sealing performance.
2
0
Share

What is the horsepower of the BMW 525?

BMW 525Li-2.0T has a maximum horsepower of 184Ps, 135 kilowatts, with a rotation speed of 5000-6500 rpm. Below is a detailed introduction about BMW cars: 1. Overview: BMW cars, produced by Bayerische Motoren Werke AG (abbreviated as BMW), mainly include series such as 1, 2, 3, 4, 5, 6, 7, and 8. BMW is renowned worldwide for manufacturing luxury cars, motorcycles, and high-performance engines. 2. Logo: The BMW logo features a double-circle design with the 'BMW' inscription above the double rings. The entire emblem resembles the blue sky, white clouds, and a continuously rotating propeller, symbolizing the company's long history and its consistent goals and purposes.
9
1
Share

Why was the Audi A1 discontinued?

The reason for the discontinuation of the Audi A1 is its lower sales compared to vehicles in the same segment. Below are specific details about the Audi A1: 1. Interior: The interior design leans towards a sporty style, with a fashionable and attractive center console, smooth and natural lines, clear and easy-to-read data, and a distinctive and dynamic cabin layout. 2. Dimensions: The Audi A1 measures 3950×1740×1420mm in length, width, and height, with a wheelbase of 2470mm. The cabin space is adequate, with sufficient head and legroom, but storage space is limited. 3. Handling: The Audi A1 offers a comfortable driving experience, with clear gear shifts and good vehicle stability. It performs well in corners with minimal body roll, making it one of the top performers among front-wheel-drive cars.
16
4
Share

What does the yellow triangle exclamation mark on the car dashboard indicate?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in cars. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark inside, a red parentheses and circle with an exclamation mark in the middle, a yellow parentheses with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic transmission fault: A yellow gear with an exclamation mark inside indicates an automatic transmission fault warning light, signaling a transmission malfunction or transmission lubricant below the normal range. The transmission fluid should be replaced promptly. Brake system fault: A parentheses and circle with an exclamation mark in the middle represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire pressure anomaly: A parentheses with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop as soon as possible for inspection and repair, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
17
4
Share

What does the ECO driving mode mean?

ECO stands for the economic driving mode of a car. ECO is an English abbreviation, derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). When the ECO indicator light on the dashboard illuminates, it indicates that the vehicle's economic mode has been activated. ECO mode is divided into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active ECO mode does not have a dedicated button. When the dashboard ECO indicator light turns on, it serves merely as a reminder function. ECO automatically evaluates driving behavior. If the current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most cars use the active ECO driving mode, which means they have a dedicated switch button. Therefore, ECO mode can be activated during daily driving. However, in situations requiring more power, such as climbing hills, it is unnecessary to activate ECO mode, as this would not reflect the economic and fuel-saving characteristics of ECO and could also affect performance. In addition, ECO mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car will prioritize speed, causing ECO mode to automatically deactivate. When idling in park or neutral (N/P) gear, or in manual mode, ECO mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit will prioritize ensuring sufficient power to drive the vehicle, and ECO mode will not function in such cases.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.