What is the fuel tank capacity of the Hongqi H5?

2 Answers
McJoel
07/25/25 12:49am
The fuel tank capacity of the Hongqi H5 is 55 liters, which is the officially announced data. Owners who have purchased the Hongqi H5 can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the Hongqi H5 is 95 octane, with a fuel consumption of 6.2 to 6.4L per 100 kilometers. A full tank of fuel can cover a distance of 859 to 887 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. The fuel level is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
14
2
Share
MaryAnn
08/10/25 3:54pm
I've taken the Hongqi H5 on several long-distance trips before, and its fuel tank size is quite practical, with a capacity of around 58 liters. Like that time I drove from Guangzhou to Changsha, it made the journey much easier without constantly worrying about gas stations. A full tank can get you about 700 to 800 kilometers, depending on how you drive—maintaining a steady speed on the highway helps save fuel. I recommend new car owners learn to plan their trips, like using mobile apps to check gas station locations to avoid emergencies on the road. Also, the Hongqi H5's fuel tank design makes it fuel-efficient for city driving too—just one refill a week for commuting saves both money and hassle. Just remember to use 92-octane fuel and never compromise with low-quality gas that could damage the engine.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

What is the license plate registration process at a 4S dealership?

The license plate registration process at a 4S dealership is as follows: 1. Bring your ID card, residence permit, vehicle certificate, and invoice, and pay the vehicle purchase tax; 2. Register and inspect the vehicle at the vehicle management office; 3. Select a vehicle license plate number; 4. After choosing the number, pay the fee and wait for the license plate, which usually takes three to five working days to receive. License plates, commonly known as tags, refer to vehicle registration plates, which are plates hung on the front and rear of the vehicle. They are typically made of aluminum, iron, plastic, or paper, and display the vehicle's registration number, registration region, and other relevant information. License plates serve as identification and information registration for vehicles, allowing authorities to identify the vehicle's region of registration and trace the owner and registration details of the vehicle through the plate number.
13
5
Share

What are the precautions when changing car engine oil?

Precautions when changing car engine oil are: 1. Perform the operation when the engine is warm to ensure the old oil is drained as completely as possible; 2. Add the new oil and ensure the amount is appropriate; 3. After adding the oil, start the engine and check all components for any leaks. Run the engine for 3 minutes to confirm the oil level reaches the normal mark. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and cushion shocks. The steps for changing engine oil are: 1. Lift the car, remove the undercover, and place a container of about 10 liters under the oil drain plug; 2. Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug and wipe it with a paper towel to check for leaks; 3. Reinstall the undercover, lower the car, and use a funnel to add the new oil through the filler port.
13
0
Share

How much oil should be added to a Jetta car?

Jetta cars require 4 liters of oil, and 5W40 or higher grade oil is suitable. The amount of oil to be added varies depending on the level of emissions. Engine oil serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. Taking the Jetta VS5 as an example, it is positioned as a compact car with body dimensions of 4419mm in length, 1841mm in width, and 1616mm in height, with a wheelbase of 2630mm. In terms of power, the Jetta VS5 uses Volkswagen's 1.4T turbocharged engine, model EA211DJS, with a maximum power of 110kW and a maximum torque of 250Nm.
8
2
Share

Why can't the headrest of BMW X5 be lowered?

BMW 5 Series headrest cannot be lowered for the following reasons: Button malfunction: The BMW 5 Series headrest may not lower due to an unresponsive or faulty button, preventing height adjustment. This requires repair. Incorrect button operation: The BMW 5 Series headrest adjustment buttons are typically located beside the two support rods of the seat headrest or on the side of the headrest. To lower the headrest, you need to press the button while simultaneously pushing the headrest downward. If not operated correctly, adjustment won't be possible. Additionally, BMW headrests come with wire connectors. When removing, first detach the rear seat panel, then unplug the wire connector and headrest clamp for removal.
12
5
Share

Why does the car still not start after jump-starting?

Jump-starting still failing to start the car is usually due to the battery being severely depleted or insufficient charging time. You can let the rescue vehicle run for a while, wait about 10 minutes, and then attempt to start the depleted vehicle. If successful, keep the depleted vehicle running for about 30 minutes to allow the alternator to charge the battery. If it still doesn't start, consider a possible starter motor failure. When performing a jump-start, it is recommended to use dedicated automotive jumper cables, avoiding makeshift or low-quality cables. Follow the correct connection sequence: connect the positive terminal first, then the negative. Ensure the clamps of the positive and negative cables do not touch each other, and the positive clamp does not contact any metal parts of the vehicle.
14
1
Share

Where are the three major components of the Mazda CX4 manufactured?

Among the three major components of the Mazda CX4, the transmission is manufactured and imported from Japan, the engine is imported from Japan but improved through domestic production, and the chassis is domestically manufactured. Definition of the three major components of a car: The three major components of a car refer to the engine, chassis, and transmission, which also account for the main cost of a vehicle. Quality of Mazda's three major components: The overall quality of the Mazda CX4 is relatively good. Not all three major components are imported; the transmission is imported, the engine is imported but improved through domestic production, and the chassis is domestically produced. The car's strengths lie in its handling and reliability, while its weaknesses include average comfort and noise insulation.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.