What is the fuel tank capacity of the Honda XRV in liters?

Why Does the Car Make Abnormal Noises When Starting?

Abnormal noises during car startup can be caused by the following reasons: 1. Hydraulic lifters: Air entering the hydraulic lifters due to low oil pressure or wear in the lifters themselves. 2. Valve clearance: Excessive valve clearance caused by wear in the valve rocker arms. 3. Dirty throttle body: Accumulation of sludge and carbon deposits leading to a dirty throttle body. 4. Carbon canister purge valve operation sound: This is a normal sound, and the car can continue to be used. However, if the noise is too loud, it is recommended to have it checked at a 4S shop. 5. Three-way catalytic converter: A "clicking" sound within half a minute after a cold start, which usually disappears afterward. This is typically the sound of the three-way catalytic converter expanding as it heats up.

10

2

Share

Which is Larger Between Compact and Subcompact SUVs?

Subcompact SUVs and compact SUVs are classified based on the vehicle's length and wheelbase. Generally, compact SUVs are larger than subcompact SUVs. Here are the specific details: 1. SUVs on the market can be categorized into several types, including subcompact, compact, midsize, full-size, and large-size. 2. Subcompact SUVs: Length ≤ 4200mm, wheelbase ≤ 2620mm. Examples include the Honda XR-V and Changan CS35. 3. Compact SUVs: Length between 4200mm and 4600mm, wheelbase between 2620mm and 2700mm. Examples include the Haval H6 and Volkswagen T-Roc. Typically, subcompact SUVs offer similar off-road capability and power as sedans, and their pricing is more economical. However, most people looking for a family car tend to prefer compact or midsize SUVs, as they provide better off-road performance, power, and space, making them more suitable for family use.

1

3

Share

Can You Apply the Brake in the S-Curve Section of Subject 2?

You can apply the brake in the S-curve section of Subject 2. If you feel the vehicle speed is too fast to control, you can lightly press the brake. Below are additional details: 1. Requirements for the hill start section: The slope of the steep hill must be greater than or equal to 10 degrees, and the length of the steep hill for the C1 license test must be greater than or equal to 20 meters. During the test, the candidate must start within 30 seconds after stopping on the steep hill; otherwise, it will be considered a failure. 2. Grading criteria for the stop at a designated point: Failing to stop at the designated point results in a deduction of 100 points; if the front bumper of the vehicle does not reach the control line after stopping, 100 points are deducted; if the vehicle rolls back more than 30 cm after stopping, 100 points are deducted; if the vehicle rolls back less than 30 cm after stopping, 10 points are deducted (originally 20 points).

12

5

Share

How much over the speed limit is driving 80 mph in a 70 mph zone?

Speeding 10%—20%. Below are the specific details about road speed limits: 1. Penalty regulations: Exceeding the speed limit by less than 10% results in a warning without fines or penalty points. Exceeding by 10%—20% incurs a fine and 3 penalty points. Exceeding by 20%—50% incurs a fine and 6 penalty points. Exceeding by more than 50% results in a fine and 12 penalty points. 2. Speed limit percentage calculation formula: (Speed / Limit speed — 1) * 100 gives the speeding percentage. For example, if the speed limit is 70 km/h and the vehicle speed is 80 km/h, divide 80 by 70, subtract 1, and multiply by 100 to get 14.28, meaning 14% over the speed limit. If the speed limit is 60 km/h and the vehicle speed is 70 km/h, divide 70 by 60, subtract 1, and multiply by 100, resulting in 16% over the speed limit.

3

4

Share

What Does Mild Hybrid Power in Cars Mean?

Mild hybrid power in cars refers to vehicles equipped with a mild hybrid system. Its characteristics are as follows: 1. The mild hybrid system is a relatively simple and cost-effective hybrid system, commonly used in many German cars. 2. Mild hybrid power alters the original power output method of the car, typically using pure electric power for startup, resulting in minimal vibration and noise when starting the engine. 3. Mild hybrid cars feature an energy recovery system that captures wasted energy during braking to recharge their own batteries, achieving energy-saving and emission-reduction effects. Below are the classifications of hybrid electric vehicles: 1. Series Hybrid Electric Vehicles (SHEV) mainly consist of three major powertrains—engine, generator, and drive motor—connected in series to form the HEV power system. 2. Parallel Hybrid Electric Vehicles (PHEV) have both the engine and drive motor as powertrains, with their power outputs capable of being combined or used separately. 3. Power-Split Hybrid Electric Vehicles (PSHEV) combine the structures of series and parallel hybrids, consisting primarily of three major powertrains: engine, motor-generator, and drive motor.

20

0

Share

Is the Subaru CVT using a steel belt or chain drive?

Subaru CVT uses a chain drive. The structural differences between CVT using chains and steel belts are as follows: 1. Chain: The chain does not directly contact the pulley but transmits torque by compressing the intermediate rocker pins. Structurally, the chain consists of two sets of circular steel plates and tension plates. Each set of steel belts is composed of 12 high-tension thin steel plates stacked together. High-strength steel is inserted between each set of steel plates to form rocker pins for connection, with a tensile strength of up to 2000 MPa. This chain structure can only transmit power by "pulling." The driving pulley compresses the chain's "rocker pins," creating static friction to drive the chain and transmit torque. 2. Steel belt: The CVT steel belt is supported by two embedded steel belts as the base, with hundreds of steel plates clamped onto the metal belt. This push-plate structure can only transmit power by "pushing," utilizing the hardness of the material between the plates to form thrust. The push plates undergo minimal deformation under external force. During power transmission, the driving pulley tightly presses against the entire side of the steel belt, creating static friction, and the driving pulley pushes the driven pulley to rotate via the steel belt.

17

1

Share

What is the fuel tank capacity of the Honda XRV in liters?

Why Does the Car Make Abnormal Noises When Starting?

Which is Larger Between Compact and Subcompact SUVs?

Can You Apply the Brake in the S-Curve Section of Subject 2?

How much over the speed limit is driving 80 mph in a 70 mph zone?

What Does Mild Hybrid Power in Cars Mean?

Is the Subaru CVT using a steel belt or chain drive?

Has the Oil Emulsification Issue in Toyota Avalon Been Resolved?

What Was the First Car in New China?

What is a Hydraulic Power Steering System?

What are the multifunction steering wheel buttons on a Buick?