What is the fuel tank capacity of the Haima S7 in liters?

2 Answers
Willow
07/24/25 5:26am
The fuel tank capacity of the Haima S7 is 61 liters, with moderate overall fuel consumption and a relatively high cost-performance ratio. Introduction to the Haima S7: Since 2012, Haima Motors has adopted a new naming convention for its models, with sedans starting with "M" and SUVs starting with "S". The Haima S7 made its debut at the Shanghai Auto Show in April 2013, positioned as a compact urban SUV. Haima S7 Fuel Consumption Details: The Haima S7 mainly consists of five models: the 2015 1.8L modified 1.8T automatic Zongcheng edition, with an average fuel consumption of 10.31L/100km; the 2015 2.0L modified 2.0L manual Zongcheng edition, with an average fuel consumption of 9.28L/100km; the 2017 1.8L 1.8T manual luxury edition, with an average fuel consumption of 8.65L/100km; the 2015 1.8L modified 1.8T automatic Zongchi edition, with an average fuel consumption of 8.65L/100km; and the 2015 1.8L modified 1.8T automatic Zongling edition, with an average fuel consumption of 10.95L/100km.
Was this review help?
18
1
Share
MilesMarie
08/11/25 1:06am
My Haima S7 has been running for several years, and I clearly remember its fuel tank capacity is 55 liters. When the fuel warning light comes on, it usually takes about 48 liters to fill up. For pure city driving, I basically need to find a gas station after just over 400 kilometers; on the highway, the fuel consumption can drop to around 8 liters per 100 km, and a full tank can easily last 550 kilometers. The fuel filler is designed on the left side of the body, so be careful not to park on the wrong side when refueling. By the way, a reminder: driving with low fuel levels for extended periods can lead to poor heat dissipation of the fuel pump, making it prone to damage. Try to refuel as soon as the warning light comes on. The fuel cap has a unique rotating feel—turning it clockwise will produce a click sound, which might take some getting used to for first-time users.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

How to set the seat memory in Geely Borui GE?

The method to set the seat memory in Geely Borui GE is: 1. Turn on the ignition switch to power the vehicle; 2. Adjust the seat to the desired position; 3. Press the SET button and release it after hearing a beep; 4. Hold button 1 until you hear a beeping sound, then release it. Taking the 2021 Geely Borui GE as an example, it belongs to the mid-size sedan category with body dimensions of 4986mm in length, 1861mm in width, and 1513mm in height, with a wheelbase of 2870mm. The 2021 Geely Borui GE features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.8T turbocharged engine delivering a maximum horsepower of 184PS, a maximum power of 135kW, and a maximum torque of 300Nm, paired with a 7-speed dual-clutch transmission.
12
0
Share

How to Distinguish Engine Oil Grades?

The method to distinguish engine oil grades is by looking at the viscosity index. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To cool and reduce temperature; 3. To clean and purify; 4. To cushion and absorb shocks; 5. To prevent rust and corrosion. Engine oil, also known as engine lubricant, includes: 1. Base oil: The main component of lubricating oil, which determines the basic properties of the lubricant; 2. Additives: These can compensate for and improve the deficiencies in the performance of the base oil. The effects of using inferior quality engine oil are: 1. It degrades the quality of the oil, reducing its performance; 2. It damages the lubrication of precision parts like the fuel pump and injector; 3. It decreases the power output of the generator set; 4. It affects the combustion efficiency of the engine.
3
4
Share

How to Use a Jack Correctly?

The correct steps for using a jack are as follows: 1. Park the car properly and place a safety warning triangle 50 to 150 meters behind the vehicle. Turn off the engine to prevent vibrations from causing the jack to slip. 2. Align the jack with the support point under the car, which should be located according to the manufacturer's markings (near the side skirts). 3. Connect the accompanying wrench and socket to the back of the jack, then rotate it directly to adjust the height. Be careful not to apply excessive force during operation, as this can easily cause the jack to deform.
9
1
Share

What does a sensor-activated trunk mean?

Sensor-activated trunk refers to a feature where you don't need to use your hands to open or close the trunk. Instead, you simply sweep your foot under the rear bumper, and the trunk will automatically open or close. The trunk serves as a storage compartment in a car, enhancing life convenience. Inside the trunk, you can typically find a spare tire, vehicle emergency kit, onboard tool kit, warning triangle, fire extinguisher, and the emergency fuel tank release cable. Methods for trunk maintenance include: 1. Use a brush to clean dirt when washing, including the edges and drainage channels of the trunk, followed by odor treatment; 2. Use categorized storage bags to organize items systematically; 3. Lay a trunk mat to prevent dirt or liquids from entering and eroding the trunk surface, while also preventing items inside from sliding, thereby reducing the risk of contamination or damage.
1
0
Share

Where is the location to add windshield washer fluid for Toyota Corolla?

Toyota Corolla's windshield washer fluid reservoir is located at the front right side of the engine compartment. The functions of windshield washer fluid are: 1. Cleaning debris on the windshield; 2. Lowering the freezing point of the liquid; 3. Ensuring the windshield remains clear and transparent for optimal visibility; 4. Eliminating static charges on the glass surface; 5. Reducing friction between wipers and glass to prevent scratches. Steps to add windshield washer fluid to Corolla: 1. Pull the engine hood release lever located below the steering wheel on the left side; 2. After pulling the lever, you'll notice a gap opening near the front emblem - insert your fingers to release the latch and lift the hood, then secure it with the support rod; 3. Open the compartment marked with the wiper symbol in the engine bay; 4. Pour in the windshield washer fluid and securely close the cap after filling.
4
2
Share

What is the engine code of the Toyota 86?

The engine code of the Toyota 86 is FA20, which was jointly developed by Toyota and Subaru. Taking the 2019 Toyota 86 as an example, its body structure is a two-door, four-seat hardtop sports car. The body dimensions are: length 4240mm, width 1775mm, height 1320mm, wheelbase 2570mm, front track 1520mm, rear track 1540mm, fuel tank capacity 50L, and curb weight 1233kg. The 2019 Toyota 86 features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 200PS, maximum power of 147kW, and maximum torque of 205Nm, paired with a 6-speed manual transmission.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.