What is the fuel tank capacity of the Haima S7 in liters?

2 Answers
McPaul
07/24/25 1:40am
The fuel tank capacity of the Haima S7 is 61L. Below is the relevant introduction: Introduction to the Haima S7: Starting from 2012, Haima Motors adopted a new naming convention for its models, with sedans starting with "M" and SUVs starting with "S". The Haima S7 made its debut at the Shanghai Auto Show in April 2013, positioned as a compact urban SUV. This vehicle is essentially a renamed product following the facelift of the Haima Knight. Compared to the previous Haima Knight, the S7 appears more stylish and is positioned slightly higher. The Haima Knight continued to be sold after the launch of the S7, positioned slightly lower with a focus on cost-effectiveness. Parameter Introduction: The body dimensions are 4480mm x 1860mm x 1715mm, with a wheelbase of 2619mm and a curb weight of 1510KG.
Was this review help?
12
0
Share
LaGabrielle
08/10/25 9:18pm
I've been driving for over a decade and remember the fuel tank capacity of the Haima S7 very clearly—it's about 58 liters, which is quite common for SUVs in its class and very practical for long trips. A full tank can get you over 500 kilometers on the highway, depending on driving habits; for example, driving smoothly saves fuel. When refueling, I prefer going in the evening when gasoline density is slightly higher, making it more cost-effective. I also remind friends to regularly check the fuel tank cap's seal to prevent evaporation or leaks. For frequent long-distance drivers, the 58-liter design means fewer stops at gas stations, but it's important to use high-quality fuel and avoid cheap, low-grade gasoline, which can clog fuel lines and the fuel pump. Overall, this capacity is very user-friendly for daily use and travel, and I often advise new owners to track refueling mileage to calculate actual fuel consumption.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

How Many Kilometers Should a Car Drive Before Cleaning Engine Carbon Deposits?

It is recommended to clean carbon deposits every 10,000 to 20,000 kilometers. The methods for removing carbon deposits and the hazards of engine carbon buildup are introduced as follows: Methods for Removing Carbon Deposits: Using an IV drip method: Cut off the fuel supply, connect a carbon cleaning agent to the engine fuel injector, and use the cleaning agent to soften the carbon deposits inside the engine so they can be burned and discharged. This method is only suitable for mild carbon buildup. Disassembling and cleaning the engine intake manifold: Remove the engine intake manifold, scrape off stubborn carbon deposits, clean it, and then reassemble it. Hazards of Engine Carbon Deposits: Engine carbon deposits can reduce engine power and increase fuel consumption. In severe cases, they can cause engine knocking, abnormal acceleration noises, damage to pistons and crankshafts, and even lead to engine oil burning, requiring major repairs.
2
4
Share

How to judge the distance between cars for beginners?

Methods for beginners to judge the distance between cars: 1. The left one-third of the left rearview mirror and the right half of the right rearview mirror are danger zones for the following car; 2. If the following car is directly behind, when the inner rearview mirror can no longer see the wheels of the following car, it means the distance is less than 20 meters, and sudden braking should be avoided; 3. When the front of the car just touches the edge of the front car's tire, the distance should be about 5 meters; 4. When the front of the car aligns with the lower edge of the front car's bumper, the distance should be about 3 meters; 5. When the front of the car aligns with the front car's bumper, the distance should be about 1 meter; 6. If the front of the car aligns with the lower edge of the front car's license plate, the distance should be about 0.5 meters.
2
4
Share

How Many Liters of Transmission Oil Should Be Added?

Transmission oil should be added approximately 4 liters. When replacing the transmission oil, the oil filter screen should also be replaced simultaneously. Precursors to transmission oil replacement include: 1. Vehicle shaking and gear shifting jerking; 2. The dashboard displays a transmission high-temperature warning; 3. The car stalls; 4. Unusual noises occur. The functions of transmission oil are: 1. Keeping the gear shifting system clean; 2. Lubricating the transmission device. Problems that may arise from insufficient transmission oil include: 1. Jerky gear shifting and unsmooth gear changes; 2. When pressing the accelerator, the increase in RPM does not correspond proportionally to the increase in speed—RPM increases normally, but the speed does not rise; 3. Severe cases may lead to transmission overheating and damage, as bearings lack lubrication, increasing the friction factor and making them prone to damage; 4. Noticeable noise, especially when driving at high speeds.
18
5
Share

What are the differences between high-power and low-power engines?

Differences between high-power and low-power engines: 1. Different lifespan: The higher the engine power, the shorter its lifespan. Under the same model, the hardware structure of the engine is completely identical. The difference in power is actually determined by the turbocharger's boost intensity to achieve different power outputs, which results in higher fuel consumption and higher maintenance costs in the long run. Low-power engines have a longer lifespan, relatively lower fuel consumption, and lower maintenance costs. 2. Different prices: There is a significant price difference between low-power and high-power versions of the same model. Intuitively, low-power versions are relatively cheaper, while high-power versions are more expensive. 3. Different power: Drivers may feel a lack of power with low-power engines. From the perspective of engine wear, the difference in wear between the two is not significant. Although high-power engines deliver higher performance, the quality standards for engine component materials are also improved to handle prolonged high-load conditions.
6
5
Share

How to Install Frameless Wipers?

Installation method for frameless wipers: Press the lower part of the wiper buckle, flip the buckle open, hook it onto the wiper mounting base, and then close the wiper buckle. If there are oil, wax, dirt, or other foreign substances on the windshield, clean them thoroughly before use. Frameless wipers are composed of four components: the wiper rubber blade, the frameless wiper steel strip, the wiper cover, and plastic parts. Wiper maintenance methods: 1. When using the wipers to remove dust from the windshield on sunny days, always spray windshield washer fluid and avoid dry wiping; 2. If there are stubborn or hard contaminants on the glass, clean them manually first; 3. When lifting the wiper blades during car washing or routine cleaning, hold the spine of the wiper blade and gently return it, avoiding snapping it back abruptly; 4. In winter, use an ice scraper to remove ice chips from the windshield surface first to prevent overburdening the wipers.
11
2
Share

What Are the Precautions for Car Body Cleaning?

Precautions for car body cleaning: 1. Avoid using water other than soft water, including hot water, alkaline water, and water with high hardness, as these substances can damage the paint. Using hard water for cleaning may leave marks and a film on the car body surface after drying; 2. Avoid using high-pressure water flow to wash the cab of a suction truck, as excessive water pressure can damage the car body paint. If there is stubborn dirt on the car body, soak it with water first and then rinse it off, using a dispersed water flow for spraying; 3. Avoid randomly adding cleaning agents. Do not use laundry detergent, scouring powder, or inferior soap during cleaning, as these cleaning agents contain alkali, which may wash away the oils in the paint and accelerate paint aging. Generally, no cleaning agents are added when washing the car; 4. Avoid touching the car body surface with dirty hands stained with oil or placing oily tools or cloths containing organic solvents on the car body, as this can easily leave marks on the paint or cause the paint to fade prematurely.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.