What is the fuel tank capacity of the Great Wall VV7 when fully filled?

Which Type of Car Engine Guard is Better?

Engine guards made of aluminum alloy are better. Different material types of guards have essential differences in their characteristics. Engine guards are generally made of hard plastic, resin, iron, and aluminum alloy. Engine guards can be divided into the following categories: 1. Aluminum alloy guards: The most cost-effective, lightweight, high-strength, and affordable, making them one of the top choices for consumers. 2. Plastic guards: Low manufacturing cost and the lightest in weight. 3. Plastic-steel and steel types: Mostly used in high-intensity off-road vehicles. Installing these types of guards on ordinary cars and urban SUVs may easily increase fuel consumption.

5

3

Share

How Long Must a Novice Driver Wait Before Driving on the Highway?

According to legal regulations, novice drivers must wait until their driver's license has been valid for one year before they can drive on the highway. If the driver's license has been valid for less than a year, the driver must be accompanied by someone who has held a driver's license for more than three years and has experience driving on the highway. During the probationary period, the novice driver must display a probationary sign on the vehicle. Otherwise, they will face penalties. Drivers in the probationary period are not allowed to drive buses, commercial passenger vehicles, or operational vehicles such as police cars or fire trucks. According to Article 75 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' if a driver in the probationary period drives on the highway, they must be accompanied by a driver who has held a corresponding or higher-level license for more than three years. Legal basis: Article 75 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses': During the probationary period, motor vehicle drivers are not allowed to drive buses, commercial passenger vehicles, police cars, fire trucks, ambulances, engineering rescue vehicles, or vehicles transporting explosives, flammable and explosive chemicals, toxic or radioactive hazardous materials. They are also not allowed to tow trailers. When driving on the highway during the probationary period, the driver must be accompanied by someone who has held a corresponding or higher-level license for more than three years. For drivers of small automatic passenger vehicles for the disabled, they may be accompanied by someone who holds a license for small automatic passenger vehicles or above.

9

1

Share

What Should You Do If Your Car Exceeds the Speed Limit by 50%?

Exceeding the speed limit by more than 50% but less than 70% will result in a fine of 1,000 yuan, 6 demerit points, and possible revocation of the driver's license. Starting from January 1, 2013, small vehicles exceeding the speed limit by 50% will be deducted 12 points at once. For ordinary vehicles outside highways, the penalties for speeding are as follows: exceeding the speed limit by less than 10% will not be penalized temporarily; exceeding the speed limit by more than 10% but less than 20% will result in a fine of 50 yuan and 3 demerit points; exceeding the speed limit by more than 20% but less than 30% will result in a fine of 50 yuan and 6 demerit points. Exceeding the speed limit by more than 30% but less than 50% will result in a fine of 200 yuan and 6 demerit points. Exceeding the speed limit by more than 50% but less than 70% will result in a fine of 1,000 yuan, 12 demerit points, and possible revocation of the driver's license; exceeding the speed limit by more than 70% will result in a fine of 2,000 yuan, 12 demerit points, and possible revocation of the driver's license. On roads with a speed limit below 60 km/h, exceeding the speed limit by less than 50% will result in a warning.

16

2

Share

How Long Does It Take to Replace a Clutch Plate?

Replacing a clutch plate involves removing the transmission and replacing components such as the pressure plate, release bearing, and clutch plate itself. This process typically takes about 2 to 3 hours. Below are some safety precautions for clutch maintenance: 1. When temporarily stopping or waiting at a red light while the engine is still running, shift the transmission into neutral instead of disengaging the power by depressing the clutch. 2. The principle for using the clutch is "quick disengagement, slow engagement." This means the pedal should be pressed down firmly and released slowly. Rapidly releasing the pedal can damage the clutch assembly's pressure springs and break the clutch plate's torsion springs, while also harming the entire drivetrain. However, minimize the time spent in half-clutch operation (as it causes significant wear on the clutch plate and accelerates wear due to rapid temperature rise, leading to a vicious cycle). 3. Normal wear occurs during clutch plate use. As the clutch plate gradually thins, the clearance between the release lever's inner end and the release bearing decreases (you may notice the clutch pedal feeling higher over time). If not adjusted promptly, the release lever's inner end may be pressed by the release bearing, causing the clutch to remain in a half-engaged state and leading to clutch plate burn-out. (It is recommended to keep the clutch pedal free travel between 20-25mm.)

16

4

Share

What issues should be paid attention to when applying for a driving school?

Issues to pay attention to when applying for a driving school include: 1. Qualification: The driving school should have a legal business license and road transport operation license. 2. Strong capabilities: To assess the driving school's strength, first check whether it has its own training ground, its own training vehicles, and whether the facilities are complete. If students learn to drive at night, the training ground should have lighting equipment and a simulated test site. 3. One-time fee: Resist the temptation of low prices, as there may be continuous demands for additional fees during the learning process or delays. Regular driving schools generally charge the fees once. 4. Flexible learning time: Difficulty in learning to drive, difficulty in making appointments, and long waiting times are common problems in many ordinary driving schools. It is advisable to consult in advance before registration.

5

Share

At What Engine RPM is Best to Shift Gears for Motor Vehicles?

For different gasoline engines, the peak torque generally falls between 2000 to 4000 RPM, while the optimal fuel economy is usually achieved between 2000 to 3500 RPM. Below are the principles to follow when shifting gears: 1. Better Start and Acceleration: To achieve better acceleration performance, i.e., peak torque, try to shift gears above 2000 RPM. 2. Comfort Mode: To reduce noise and save fuel, keep the shifting RPM below 3000. 3. Sport Mode: For better acceleration performance or to reduce frequent gear shifts, consider revving up to 4000 RPM before shifting.

4

1

Share

What is the fuel tank capacity of the Great Wall VV7 when fully filled?

Which Type of Car Engine Guard is Better?

How Long Must a Novice Driver Wait Before Driving on the Highway?

What Should You Do If Your Car Exceeds the Speed Limit by 50%?

How Long Does It Take to Replace a Clutch Plate?

What issues should be paid attention to when applying for a driving school?

At What Engine RPM is Best to Shift Gears for Motor Vehicles?

Where to Get the Novice Driver Sticker?

What are the dimensions of the Volkswagen New Lavida

Where is the air conditioning switch of the X-Trail located?

Can a new car with a temporary license plate but no vehicle license be driven on the road?