What is the fuel tank capacity of the Great Wall Pao Diesel version?

1 Answers
SanMia
07/29/25 6:05pm
The fuel tank capacity of the Pao-2022 model 2.0T Commercial Edition manual diesel four-wheel-drive Tea King Edition long box GW4D20M is 80L. The engine is equipped with a 2.0L turbocharged engine, and the transmission is a 6-speed manual transmission (MT). The drive type is front-engine four-wheel drive. The front suspension type is double-wishbone independent suspension, and the rear suspension type is leaf spring. In the same class, the fuel tank capacity of the Navara-2021 model 2.5L manual two-wheel-drive Comfort Edition QR25 is 73L. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity calibrated by the car manufacturer is from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to ensure that the fuel in the tank expands when the temperature rises without overflowing the tank's safety space. If the fuel is filled up to the tank opening during refueling, the actual refueling amount will be larger than the calibrated fuel tank capacity. If the owner wants to know the remaining fuel in the tank, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it means the fuel is sufficient.
Was this review help?
18
5
Share
More Forum Discussions

When is the second car maintenance?

Car second maintenance is generally at 10000 kilometers or 9 months, whichever comes first between mileage and time. The content of the second car maintenance and items that do not need maintenance are as follows: Content of the second car maintenance: The second maintenance requires checking and adjusting the working conditions of the engine and electrical equipment; removing and cleaning the oil pan and oil filter, checking and adjusting the steering and braking mechanisms, removing and cleaning the front and rear hub bearings; adding lubricating oil, removing and inspecting tires and performing rotation, etc. Its purpose is to maintain the good working performance of various parts, mechanisms, and assemblies of the vehicle to ensure their normal operation between two secondary maintenances. Items that do not need maintenance: For the second car maintenance, there is no need for other replacements and cleaning, such as engine cleaning. Doing these items too early during the second maintenance is both a waste of money and time.
16
0
Share

How Many Days Does It Take to Get License Plates at the DMV?

Normally, it takes 7-15 working days to get license plates at the DMV. Analysis of different scenarios for obtaining license plates: On-site number selection: If the car owner chooses the on-site selection method (such as 10-choose-1 or 50-choose-1), they can usually get the official license plates immediately, as these plates have already been made and can be handed over right after selection. Online number selection: If the car owner opts for self-compiled selection or online number selection, it typically takes about 7-15 working days for the plates to be made before the owner is notified to collect them. If the DMV is far away, the plates can also be mailed. The staff will send them via EMS or regular postal service, which usually takes an additional 2-3 days.
18
1
Share

Is the AMT transmission good?

AMT (Automated Manual Transmission) is a combination of AT automatic transmission and MT manual transmission. Vehicles equipped with AMT no longer require a clutch pedal; the driver only needs to simply press the accelerator pedal to easily start and drive the car. Structurally, it can be understood as a manual transmission that uses hydraulic mechanisms to operate the clutch and shift forks for automatic gear shifting. Advantages: Simple structure, easy operation, fast shifting, fuel-efficient and durable, high transmission efficiency, and relatively low cost. Since the AMT transmission is structurally evolved from the MT transmission, it also inherits the MT transmission's characteristics of strong durability and easy maintenance. Disadvantages: Mainly, it has significant gear shift impact, severe jerking, and poor comfort. Its popularity in China is far lower than in developed countries in Europe and America. Currently, AMT is basically only used in some A0-class models.
13
4
Share

How to Solve the Mismatch Between Range and Fuel Gauge?

It is recommended to visit a 4S shop and seek professional maintenance personnel for assistance, as this type of issue cannot be resolved on your own. The vehicle's range is calculated by the onboard computer based on the car's fuel consumption. In reality, fuel consumption is not consistent every second, so a mismatch between the range and fuel gauge is quite normal. The factors affecting fuel consumption are as follows: 1. Travel conditions, road environment, and driving habits all influence the car's fuel consumption. 2. Different driving habits can lead to variations in fuel consumption. For example, frequent rapid acceleration or deceleration can increase fuel consumption by approximately 5%-10% compared to normal driving. 3. Road conditions also significantly impact fuel consumption. Poor road conditions require more power from the car, leading the engine to consume more fuel. 4. Statistics show that driving the same distance in urban areas consumes about 20% more fuel than on highways or in suburban areas. Compared to stop-and-go city driving, highway and suburban driving are smoother and result in relatively lower fuel consumption.
2
2
Share

Which is More Advanced: ZF 8AT or Aisin 8AT?

Compared to the Aisin 8AT, the ZF 8AT is more advanced. A device for changing the speed ratio and direction of motion. Used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several gear pairs. Introduction: A device for changing the speed ratio and direction of motion. Used to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several gear pairs. Function: During vehicle operation, to adapt to different working conditions, the driving force and speed of the vehicle need to vary within a certain range. However, the existing engine's torque and speed variation range cannot meet this requirement, hence the installation of a transmission.
8
4
Share

Can You Stop During the Reverse Parking Test in Subject Two?

During the reverse parking test in Subject Two, stopping midway is not allowed. If the vehicle stops for more than 2 seconds during the process, 5 points will be deducted each time. The reasons for stopping and techniques to avoid stopping are as follows: Reasons for stopping during reverse parking: There are three main reasons: First, insufficient clutch control leads to inconsistent speed, including sudden stops; second, uneven ground with small bumps or slight slopes can cause brief stops; third, when turning the steering wheel to full lock, the angled front wheels create significant resistance, causing the vehicle to stop momentarily. Techniques to avoid stopping midway: Master clutch control. If the speed is too fast, gently press the clutch slightly; if the speed slows down or is about to stop, lift the clutch slightly to maintain the ideal speed; the speed should not be too slow. During reverse parking, control the speed to ensure it is neither too slow nor too fast, just moderate.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.