What is the fuel tank capacity of the Great Wall M4?

What kind of Toyota vehicle is the Fortuner?

Fortuner is Toyota's cross-country vehicle. The Fortuner combines the versatility of an MPV with the capabilities of a four-wheel-drive off-road vehicle. Here is more information about this vehicle: 1. The Fortuner comes with a parking detection system that can be activated when needed, providing better distance control when reversing for parking. 2. The Fortuner excels in handling and performance. With a 2.7-liter engine capacity, it delivers 158hp at 5200rpm, and a maximum torque of 241Nm at 3800rpm. The 2TR-FE 16-valve DOHC engine is equipped with advanced VVT-i technology, ensuring sensitive power output and driving response, with substantial torque available at low to medium rpm ranges.

13

3

Share

How is the automatic braking function of the Tayron?

The automatic braking function of the Tayron consists of two parts: a microwave sensor at the front and a sensor at the rear. The automatic braking function helps reduce the occurrence of traffic accidents. Below is relevant information about the Tayron's automatic braking function: 1. The front microwave sensor monitors the distance ahead while driving, and the rear sensor monitors the distance between the car and obstacles behind when reversing. 2. When driving on the road, if the following distance to the car ahead is too close, the automatic braking may be activated. 3. When reversing into a parking space, if the speed is not controlled properly and becomes too fast, and the distance to obstacles is too close, the car may automatically brake.

2

1

Share

Daytime Running Light Indicator?

Daytime running lights do not have an indicator. In most vehicles, the daytime running lights automatically turn on after the engine is started. These lights do not require the driver to manually activate them, so there is no switch inside the car. Additionally, no indicator will appear on the dashboard when the daytime running lights are on. Here is some additional information: Car Lights: Most vehicles are equipped with daytime running lights, and even some family cars priced around a hundred thousand yuan have them. Daytime running lights can enhance driving safety and reduce the likelihood of accidents. Typically, these lights will illuminate once the car is powered on, so no action is required from the driver, and there is no switch inside the vehicle. Most cars have their light control switches located on the left side of the steering wheel, often as a rotary knob, though some models may use button-style switches.

15

3

Share

How to Fix Power Window Failure?

Solutions for power window failure are as follows: 1. Lift the window button directly to raise the window to the top, then hold it for 3-5 seconds without releasing your finger. 2. Press the window button to lower the window to the bottom, hold it for 3-5 seconds without releasing, then try the one-touch function again. The power window should then work normally. Notes: 1. If the one-touch window failure is not caused by the above reasons, it might be due to abnormal door control module, malfunctioning window control button, or damaged lift motor. In such cases, it is necessary to visit a 4S shop for repair. 2. Generally, buttons with one-touch window function have anti-pinch protection. For car owners with children, it is best to purchase a car with this function and always lock all four windows from the driver's control side while driving.

15

4

Share

What are the differences between the Mercedes-Benz E200 and E260?

Mercedes-Benz E200 and E260 differ in the following aspects: 1. Engine: The Mercedes-Benz E200 is equipped with a 2.0T 184 horsepower engine, while the E260 comes with a 1.5T 184 horsepower engine. 2. Top speed: The E200 can reach 235 km/h, whereas the E260 can reach 230 km/h. 3. Fuel consumption: The E200 averages 6.9L/100km, while the E260 averages 6.8L/100km. 4. Exterior differences: The rear badges are different, with one labeled E200 and the other E260.

1

3

Share

How to Check the Condition of Fuel Injectors?

To inspect the condition of fuel injectors, they need to be removed and tested using a fuel injector atomization tester to observe their spray pattern. If no fuel is sprayed, the injector is definitely damaged; if the fuel atomization is noticeably poor, it also indicates damage. For more professional analysis, the injector should be sent back to the manufacturer. Below is an introduction to automotive fuel injectors: A car fuel injector is essentially a simple solenoid valve. When the electromagnetic coil is energized, it creates magnetic force that lifts the needle valve, opening the injection hole. Fuel is then sprayed at high speed through the annular gap between the needle valve tip and the injection hole, forming a fine mist for optimal combustion. As one of the key components in electronic fuel injection engines, the performance of fuel injectors significantly impacts engine operation.

14

1

Share

What is the fuel tank capacity of the Great Wall M4?

What kind of Toyota vehicle is the Fortuner?

How is the automatic braking function of the Tayron?

Daytime Running Light Indicator?

How to Fix Power Window Failure?

What are the differences between the Mercedes-Benz E200 and E260?

How to Check the Condition of Fuel Injectors?

How to Use Mercedes-Benz Seat Adjustment Buttons?

Is Leaving After Scratching a Car Considered Hit-and-Run?

Is it no longer necessary to display the compulsory insurance label on the vehicle?

Will an Automatic Transmission Car Move Without Accelerating?