What is the fuel tank capacity of the GLE320?

3 Answers
DiArianna
07/29/25 10:29am
The fuel tank capacity of the Mercedes-Benz GLE is 85 liters, as officially announced. Owners who have purchased the Mercedes-Benz GLE can also check this information on the vehicle's configuration sheet. The Mercedes-Benz GLE requires 95-octane fuel, with a fuel consumption of 6.2-11.5L per 100 kilometers. A full tank can cover a distance of 739 to 1371 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
5
0
Share
SanVictoria
08/13/25 2:40pm
Oh, I've been driving the GLE 320 for several years, and the fuel tank is really spacious with a capacity of 85 liters, equivalent to 22.5 gallons. For someone like me who loves long-distance trips, it's incredibly convenient—a full tank can last for six to seven hundred kilometers, so cruising on the highway rarely requires worrying about refueling. For daily commutes, a full tank easily lasts a week, and it’s even more hassle-free when taking weekend trips with friends. I remember last year’s road trip to the mountains—packed with luggage and camping gear—the fuel consumption was around 9 liters per 100 km, and the large tank allowed us to drive for most of the day without stopping. But a word of caution: don’t rely too much on the big tank; keep an eye on the trip computer’s fuel economy display, as rapid acceleration or traffic jams can significantly reduce range. Adapting driving habits, like gentle throttle input, can save a lot of fuel. In short, the 85-liter capacity makes both daily life and adventures more carefree, reducing trips to the gas station and freeing up more time.
Was this review help?
4
0
Share
Expand All
DelJulian
10/07/25 5:21am
From my driving experience, the GLE 320 has a fuel tank capacity of 85 liters, which is quite solid among its SUV peers. Compared to the BMW X5's 80 liters or the Audi Q7's 90 liters, it sits in the middle range, balancing space without sacrificing efficiency. I'm meticulous with my driving habits—with this tank paired with a diesel engine, the fuel consumption is 8 liters per 100 km, allowing a full tank to cover over 1,000 km, which is practical for frequent business travelers. But don’t just focus on the numbers; in city traffic jams, fuel consumption can spike above 10 liters per 100 km, drastically reducing range, so I always ease on the brakes to maintain steady speed. Regularly check the fuel cap seal to avoid aging and leaks. Knowing the capacity helps me plan refueling days in my monthly schedule, avoiding unexpected delays. Also, using higher-grade fuel can improve combustion efficiency, making the large tank perform even better—don’t compromise with low-quality fuel to save money.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

What Causes the Hissing Sound When Suspension Goes Over Bumps?

Suspension making a hissing sound when going over bumps is due to shock absorber oil leakage or shock absorber bending. Here are the specific manifestations of shock absorber failure: 1. Abnormal noise: If the vehicle makes abnormal noises when driving on bumpy roads, it is highly likely that the shock absorber is damaged. 2. Oil leakage: When inspecting the shock absorber through the wheel arch with a flashlight, if oil leakage is observed on the exterior of the shock absorber, it indicates the shock absorber is already damaged. 3. Loose chassis: When driving on bumpy roads, if the vehicle body exhibits excessive bouncing or unstable swaying, it usually indicates a problem with the shock absorbers.
12
5
Share

Is the Highlander 2.5 Hybrid Powerful Enough?

The Highlander 2.5 hybrid provides sufficient power. Below are the relevant details: 1. Powerful Base Engine: The gasoline version is equipped with a 3.5L V6 engine, while the hybrid version features a 2.5L engine. This 3.5L V6 engine delivers 295 horsepower and a peak torque of 368 N·m, paired with an 8AT transmission. The hybrid model combines a 2.5L four-cylinder engine with two electric motors, producing a combined power output of 240 horsepower. 2. Enhanced Safety Features: The Highlander comes standard with Toyota Safety Sense 2.0, which includes automatic emergency braking with pedestrian detection, automatic high beams, and more. The 2020 model adds lane centering assist and adaptive cruise control. 3. High-Quality Interior: The interior boasts a range of standard features, such as power-adjustable driver's seat, tri-zone climate control, and keyless entry. Optional upgrades include a panoramic sunroof, power liftgate, and power-adjustable front passenger seat. 4. Advanced Technology: New tech is a highlight of the Highlander, with the standard 8-inch touchscreen on the center console offering Apple CarPlay, Android Auto, and Amazon Alexa connectivity.
12
4
Share

What does it mean when a car shows an engine fault?

Here are the possible reasons why a car shows an engine fault: 1. Poor fuel quality: Low-quality fuel leads to incomplete combustion of the air-fuel mixture, failing to meet the engine's fuel performance requirements, which causes the engine fault light to illuminate. 2. Oxygen sensor malfunction: A damaged oxygen sensor or a loose/damaged sensor connector can cause the air-fuel mixture to be too lean or too rich, triggering the fault light. 3. Mass airflow sensor failure: If the mass airflow sensor or its circuit malfunctions, the ECU cannot receive the correct intake air volume signal, resulting in improper fuel control. This leads to a mixture that is either too lean or too rich, causing symptoms such as rough idling, poor acceleration, increased fuel consumption, and black smoke from the exhaust pipe, ultimately affecting the car's engine performance.
19
4
Share

Should the Clutch Be Fully Released When Reversing Uphill?

When reversing uphill, the clutch should not be fully released. Fully releasing the clutch can easily cause the car to stall. Below are some related details about the clutch: 1. Location: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. 2. Function: It allows gradual engagement between the engine and the transmission, ensuring a smooth start for the car; temporarily disconnects the engine from the transmission to facilitate gear shifting and reduce impact during shifting; and acts as a separator during emergency braking to prevent overload in the transmission system, providing a certain level of protection. 3. Operation Technique: Use the heel of the left foot as a pivot point, place the ball of the foot on the clutch pedal, and press or lift using the ankle and knee. When lifting the clutch, the heel can be slightly moved backward to prevent the clutch pedal from getting stuck under the ball of the foot.
5
2
Share

Can Engine Cleaner Remove Carbon Deposits?

Engine cleaner can only remove surface carbon deposits and cannot achieve complete cleaning. Below is relevant information about engine cleaners: 1. Definition: Engine carbon deposit cleaner is formulated with high-efficiency surfactants, detergents, corrosion inhibitors, and other additives. It appears as a colorless transparent liquid and is diluted with water at a concentration of 3-6% during use. 2. Scope of Application: Suitable for degreasing and cleaning automotive components, leaving them bright and new while maintaining the original luster of metal materials. 3. Advantages: The cleaner has the ability to remove engine carbon deposits, replacing gasoline, kerosene, and organic solvents for engine cleaning. It saves petroleum resources and eliminates the health hazards posed by the toxicity of organic solvents.
13
4
Share

Can You Make a U-Turn on a Single Solid Line?

Making a U-turn on a single solid line is not allowed and is considered a traffic violation. Regardless of whether it's a single or double solid line, according to Article 90 of the Road Traffic Safety Law, violators who breach prohibited markings will be fined 200 yuan and receive a 3-point penalty. Generally, on long roads, white solid lines appear in the middle section or before intersections. If the line is a yellow dashed line or white dashed line, U-turns are permitted. However, U-turns are strictly prohibited on any solid line. Permissible U-turn situations: U-turn allowed at intersections with U-turn signs: If there is a clear U-turn sign at an intersection, U-turns are permitted. If there is a U-turn traffic light, follow its instructions. In the absence of a traffic light, U-turns can be made as long as they do not obstruct other vehicles or pedestrians. U-turn allowed at intersections without explicit 'No U-turn' or 'No Left Turn' signs: If there are no signs explicitly prohibiting U-turns, they are allowed. 'No explicit prohibition' means the absence of 'No U-turn' or 'No Left Turn' signs and no solid lines in the center of the road. U-turns permitted on yellow grid lines: Yellow grid lines are no-parking zones, typically placed at intersections prone to congestion due to temporary stops, important facility entrances, or other necessary locations. Parking (including waiting at traffic lights) on these lines is a violation. Although stopping is prohibited, U-turns are allowed on yellow grid lines unless there is a central barrier. U-turn allowed with a U-turn traffic light: If a U-turn traffic light is present, follow its signal—green means U-turns are permitted. When 'No Left Turn' and 'U-turn Allowed' signs coexist: U-turns are allowed, but left turns are prohibited. Note that 'No U-turn' is not the same as 'No Left Turn.' Important considerations when making a U-turn: Observe road markings—U-turns are never allowed on solid lines under any circumstances. Continue driving until a suitable U-turn location is found. If there is a 'No Left Turn' sign, U-turns are also prohibited at that intersection, even if 'No U-turn' is not explicitly stated, as U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. U-turns are not allowed from the second left-turn lane. Always yield to oncoming traffic when making a U-turn. Proceed only if it does not interfere with straight-moving vehicles; otherwise, you will bear full responsibility for any accidents. Near intersection stop lines, lanes often have guiding arrows. Not all leftmost lanes have left-turn arrows—some may have straight arrows. Even without explicit 'No U-turn' signs, U-turns are prohibited in such lanes. U-turns are not permitted on pedestrian crosswalks and are considered violations.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.