What is the fuel tank capacity of the Geely Vision X3 Pro?

2 Answers
StJake
07/28/25 10:13pm
Geely Vision X3 Pro fuel tank capacity is 42 liters. Fuel tank capacity: Fuel tank capacity (L) refers to the size of the fuel tank, which measures a vehicle's ability to hold fuel. The fuel tank capacity determines the driving range. For two cars with identical engines, the one with a larger fuel tank can travel farther. Dashboard fuel gauge: The dashboard fuel gauge displays the actual amount of fuel in the tank, represented by eight equal segments. The upper limit of the fuel gauge is marked as F, and the lower limit is marked as E. It is best to keep the fuel level above one-quarter of the tank capacity. If the fuel gauge shows only one segment remaining or the low fuel warning light comes on, refuel as soon as possible. After refueling or driving for a while, the low fuel warning light will automatically turn off.
Was this review help?
13
3
Share
McGage
08/12/25 2:45am
I've been driving the Geely Vision X3 Pro for a long time, and its fuel tank capacity is 45 liters. For me, this size is quite suitable. For daily city driving, a full tank can last over 500 kilometers, with an average fuel consumption of about 6L/100km, so I don't need to refuel frequently, which is both convenient and time-saving. On the highway, the fuel consumption is even lower, and the range is longer, easily exceeding 600 kilometers. I recommend regularly checking the fuel tank's sealing condition to prevent leaks. In winter, low temperatures can affect the fuel density, which may impact the precise capacity. When refueling, I prefer to fill it up to about 90% to avoid overloading, which is also better for the suspension system. In the long run, choosing a car with the right fuel tank capacity can also reduce fuel costs, making it both practical and economical.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

What does the ESC button in a car mean?

The ESC button in a car refers to the Electronic Stability Control system, whose function is to monitor the driving state of the vehicle and prevent the car from deviating from the ideal trajectory during emergency obstacle avoidance or when understeer or oversteer occurs during turns. The buttons in a car and their functions are divided into: 1. Fuel tank opening button: remotely opens the fuel tank cap from inside the car; 2. Parking sensor button: turns the car's parking sensor system on or off; 3. Central locking button: the control button for the car's central door locking system; 4. Rear sunshade button: controls the opening and closing of the electric rear sunshade inside the car; 5. Headlight cleaning button: controls the automatic cleaning function of the headlights.
4
0
Share

What is the function of paddle shifters?

The function of paddle shifters is to allow the driver to perform gear shifting operations without taking their hands off the steering wheel. As a rapid shifting device, it can enhance driving maneuverability. The method of using paddle shifters is as follows: 1. Fully depress the car's brake pedal; 2. Press the car's one-touch start button; 3. Place the car's automatic gear lever in the D position to enter automatic mode; 4. Pull the plus (+) paddle on the steering wheel to increase the gear; 5. Pull the minus (-) paddle on the steering wheel to decrease the gear. Paddle shifters are categorized by form into: 1. Fixed type: The steering wheel rotates while the paddle shifters remain stationary; 2. Follow-up type: The paddle shifters rotate simultaneously with the steering wheel as a whole.
20
0
Share

How to Turn on the High Beams on a Cruze?

The method to turn on the high beams on a Cruze is to push the light control lever outward. The function of the high beams is to improve visibility and expand the field of view. The Cruze is a compact car with the following dimensions: length 4666mm, width 1807mm, height 1460mm, wheelbase 2700mm, fuel tank capacity 52 liters, and trunk capacity 430 liters. The Cruze is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW at 5600 rpm and a maximum torque of 240Nm, paired with a 7-speed dual-clutch transmission.
7
3
Share

What are the causes of insufficient compression in cylinder two?

The causes of insufficient compression in cylinder two are: 1. Severe wear of piston rings, resulting in reduced sealing effectiveness; 2. Scratches or abnormal wear on the cylinder wall; 3. Poor sealing of the valve seat or spark plug seat; 4. Damage to the cylinder gasket. The solutions for insufficient compression in cylinder two are: 1. Replace the valve oil seal; 2. Replace the piston and piston rings; 3. Install a cylinder liner; 4. Replace the valve spring; 5. Replace the cylinder head gasket. The symptoms of insufficient compression in cylinder two are: 1. Excessive smoke escaping from the oil filler opening in the crankcase; 2. Lubricating oil in the oil pan becomes dirty and overheats easily; 3. Noticeable decrease in engine power while driving.
20
5
Share

Does the ix35 comply with China VI emission standards?

ix35 complies with China VI emission standards, which regulate the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot emitted from vehicle exhaust. The ix35 is a compact SUV with body dimensions of 4500mm in length, 1850mm in width, and 1715mm in height, a wheelbase of 2640mm, and a fuel tank capacity of 58 liters. The ix35 is equipped with a 1.4T turbocharged engine, delivering a maximum power of 103kW at 6000rpm and a maximum torque of 242Nm, paired with a 7-speed dual-clutch transmission.
2
2
Share

What Causes the Car Malfunction Light to Illuminate?

Car malfunction light illuminates due to: 1. Sensor issues: When the water temperature, crankshaft position, air flow, intake temperature, or oxygen sensors are damaged, have poor contact, or experience signal interruption, the car's ECU cannot accurately obtain engine data; 2. Maintenance problems: Irregular maintenance and poor driving habits can increase the engine's operational burden; 3. Fuel quality issues: The fuel added to the car has a specific grade, and failure to add as required can cause engine wear; 4. Poor mixture combustion: This can lead to engine carbon buildup or knocking issues, which are monitored by the engine's oxygen sensor; 5. False faults: Occur due to bumps during driving, tampering with certain engine connectors, or temporary ECU signal interruptions.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.