What is the fuel tank capacity of the Geely Haoyue in liters?

1 Answers
BrooklynDella
07/30/25 4:21am
The 2022 Geely Haoyue has a total of 10 models, all of which have a fuel tank capacity of 60 liters. The entire lineup is equipped with a 1.8-liter turbocharged engine, paired with either a 6-speed automatic transmission (AT) or a 7-speed wet dual-clutch transmission (DCT), and features front-wheel drive. In the same vehicle class, the Beijing Hyundai ix35 has a fuel tank capacity of 58 liters, the Changan CS75PLUS has a 58-liter tank, and the Roewe RX5 has a 55-liter tank. If owners want to check the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the needle is close to E, it indicates that the fuel is running low, while nearing F means the tank is full. Fuel tank maintenance includes the following steps: Drain any accumulated water and sediment from the tank, and check for leaks at fuel line connections and switches. For fuel tank caps equipped with air and vapor valves, ensure the vent holes are clear and unobstructed. The filter screen at the fuel filler neck should remain intact to prevent debris from entering the tank during refueling, which could clog the fuel lines. The sealing gasket on the fuel filler cap should also be in good condition to prevent fuel spillage while driving.
Was this review help?
2
0
Share
More Forum Discussions

What is the Difference Between Replacing a Lost License Plate and Exchanging a License Plate?

Replacing a lost license plate and exchanging a license plate differ in nature: replacing a lost license plate means obtaining a new one by presenting credentials when the original is lost; exchanging a license plate means replacing an old one with a new one. The time required for replacing a lost license plate and exchanging a license plate is the same. In both cases, you need to fill out an application form for replacing or exchanging a motor vehicle license plate, and bring the vehicle registration certificate and the original ID card of the vehicle owner to the local vehicle management office for processing. License plate is the common term for vehicle plate, which are plates hung on the front and rear of a vehicle, usually made of aluminum, iron, plastic, or paper, engraved with the vehicle's registration number, registration region, or other relevant information.
13
2
Share

How to Clean Car Seat Covers Covered in Cooking Oil?

Methods for cleaning car seat covers covered in cooking oil are: 1. Wipe with gasoline, then rinse with water; 2. Use a towel dipped in dishwashing liquid to scrub, repeat twice, and then wipe once more with a clean towel. Seat covers can be categorized by material into genuine leather, microfiber leather, synthetic leather, nylon, chemical fiber, artificial fur, and polyester wool seat covers. Their purpose is to protect the seats and provide a comfortable riding experience for passengers. Car seat covers are essential products for protecting car seats and maintaining human health. A standard car seat cover set usually consists of five pieces: two front seat covers, two small backrest covers, and one large seat cover. Car seat covers can be classified by manufacturing process into hand-woven car seat covers, machine-woven car seat covers, and hand-stitched car seat covers.
9
2
Share

What is the range of the Model Y?

Taking the Model Y 2021 Long Range All-Wheel Drive version as an example, its range is 594 kilometers. In terms of suspension, this car uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. Its dimensions are 4750 mm in length, 1921 mm in width, and 1624 mm in height, with a wheelbase of 2890 mm. The curb weight is 1997 kg, and the body structure is a 5-door, 5-seat SUV with a dual-motor all-wheel-drive system. In terms of power, it is equipped with a motor with a total power of 317 kW and a total torque of 545 Nm.
6
1
Share

What Causes the Car to Jerk and Lose Power When Accelerating?

Car jerking and losing power when accelerating can be caused by: 1. Excessive carbon buildup in the throttle body, fuel injectors, or intake manifold; 2. Poor fuel quality leading to incomplete combustion; 3. Faulty spark plugs or ignition coils, which require timely repair at an auto shop. The functions of the accelerator pedal are: 1. Controlling engine speed by adjusting the pedal's depression; 2. Regulating the carburetor to determine engine output power. The accelerator pedal, also known as the throttle or gas pedal, is the control device for engine power. The driver operates the throttle lever in the cockpit, which transmits commands through the control system to the carburetor or fuel regulator on the engine.
14
0
Share

How to Deal with Jerking Sensation When Automatic Transmission Downshifts During Deceleration?

Solutions for jerking sensation when an automatic transmission downshifts during deceleration include: 1. Clogged fuel system—clean the fuel lines, injectors, fuel passages, and fuel pipes; 2. Damaged transmission—repair or replace the transmission. An automatic transmission refers to a system where the driver does not need to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The gears of an automatic transmission vehicle are: 1. P for Parking/Start; 2. R for Reverse; 3. N for Neutral; 4. D for Drive, also known as the driving gear; 5. L for Low gear; 6. S for Sport mode; 7. OD for Overdrive.
9
2
Share

What is the correct way to use the lock button?

The correct way to use the lock button is: when shifting into a gear that may cause reverse impact on the transmission, it will automatically lock, and the lock button should be pressed immediately. Vehicle owners should pay attention to detailed operations while driving to prevent the transmission from locking, thereby ensuring better operation of the transmission. The functions of the transmission are: 1. Change the transmission ratio to expand the range of torque and speed changes of the drive wheels; 2. Keep the engine rotation direction unchanged, allowing the car to reverse; 3. Use neutral gear to interrupt power transmission, facilitating gear shifting or power output; 4. A power output device can be installed.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.