What is the fuel tank capacity of the Ford Focus hatchback?

1 Answers
MaxLynn
07/29/25 8:52am
The fuel tank capacity of the Ford Focus hatchback model is 53 liters. This data is officially released, and owners who have purchased the Focus hatchback can also check it on the vehicle's configuration sheet. The recommended fuel grade for the Focus hatchback is 92 octane, with a fuel consumption of 5.5-5.7L per 100 kilometers. A full tank can cover a distance of 929-963 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level at all times. Generally, the fuel level is observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow from the tank. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
12
4
Share
More Forum Discussions

Where is the air conditioning drain outlet of the Cruze?

The air conditioning drain outlet of the car is located under the dashboard on the right side of the vehicle chassis, where there is a pipe serving as the drain outlet. Below is some related information: 1. Appearance: The Cruze boasts a very stylish design. Its front face adopts Chevrolet's new family design concept, with the grille paired with the blackened bowtie emblem, giving it a very handsome look. From the side view, the car exhibits excellent visual effects, with subtly visible waistlines and smoked alloy wheels, exuding a strong sense of sportiness. 2. Powertrain: This model is equipped with a 1.0T three-cylinder engine, and there is also a 1.3T three-cylinder engine option. It is paired with a 6-speed manual transmission, a 6-speed dual-clutch transmission, or a 6-speed automatic transmission.
9
1
Share

What are the requirements for tires in motor vehicle annual inspections?

Motor vehicle annual inspections have the following requirements for tires: the tires must be intact without severe damage; the tire models must be consistent with matching tread patterns. The maintenance methods for tires include: 1. Regularly remove stones stuck in the tire grooves; 2. Minimize exposure of tires to direct sunlight; 3. Promptly check tire pressure; 4. Pay attention to suspension maintenance; 5. Periodically inspect front wheel alignment; 6. Be mindful of driving habits. The functions of tires are: 1. Supporting the full weight of the vehicle and bearing the load of the car; 2. Transmitting traction and braking torque to ensure adhesion between the wheels and the road surface; 3. Reducing and absorbing vibrations and impact forces during driving, preventing excessive vibrations and premature damage to vehicle components; 4. Adapting to the high-speed performance of the vehicle while reducing driving noise, ensuring driving safety, handling stability, comfort, and fuel efficiency.
8
1
Share

Procedure for Driver's License Renewal?

Below is an introduction to the driver's license renewal process: Materials required for driver's license renewal: 1. The original driver's license of the motor vehicle driver and the original ID card. 2. Three one-inch color photos with a white background. 3. Physical condition certificate. Additional information: Physical examination items for driver's license renewal: 1. Height: No restriction. 2. Vision: The naked eye vision or corrected vision of both eyes must reach 4.9 on the logarithmic visual acuity chart (equivalent to 0.8 on the E chart). 3. Color discrimination: No red-green color blindness. 4. Hearing: Able to distinguish the direction of the sound source with each ear 50 cm away from the tuning fork. 5. Upper limbs: Both thumbs must be intact, and each hand must have three other fingers intact, with normal limb and finger movement functions. 6. Lower limbs: Normal movement function, with a length difference of no more than 5 cm.
8
0
Share

What is the range of the BYD Tang?

After its launch, the new BYD Tang will introduce three models: EV500, EV550, and EV600, with corresponding ranges clearly indicated at 500 kilometers, 550 kilometers, and 600 kilometers respectively. More details are as follows: 1. Interior: The rotatable large central control screen remains the standout feature, paired with a full LCD instrument panel and an electronic gear lever, giving it a highly technological appearance that aligns with current trends. With significantly fewer physical buttons, the entire dashboard looks much cleaner. The configuration will continue to meet expectations. 2. Powertrain: The new vehicle will be purely electric-driven, equipped with a permanent magnet synchronous motor delivering a maximum power of 245 horsepower, achieving 0-100 km/h acceleration in just 4.5 seconds. Compared to other new energy vehicles on the market, the BYD Tang EV's range can be said to have reached a new level.
15
3
Share

Is a Tire Temperature of 50 Degrees Normal?

Tire temperature of 50 degrees is within the normal range. Here is relevant information about tire temperature: 1. Normal temperature range: Tire temperature between 90-110 degrees Celsius is normal, and a tire temperature of 55 degrees is not a concern. Tires are equipped with insulation sleeves that generally maintain the temperature within a controllable range. Additionally, excessively high tire temperatures are very dangerous. Prolonged contact with high-temperature road surfaces causes heat accumulation, rapidly reducing the mechanical properties of the tire rubber material. On the other hand, due to thermal expansion, excessively high temperatures will increase tire pressure. When the tire strength is insufficient to withstand the pressure, a blowout becomes inevitable. 2. Controlling speed: To prevent excessively high tire temperatures, it is essential to control driving speed. When a vehicle travels at high speed, most of the kinetic energy is absorbed and converted into heat, raising the tire temperature. This accelerates rubber aging and reduces the fatigue strength of the cord layers, leading to early tire separation or blowouts. Therefore, limiting driving speed is crucial for controlling tire temperature.
2
0
Share

Which Car Models Offer Seat Cooling Function?

Models such as Haima V70, Skoda, Passat, and LaCrosse are equipped with seat cooling function. Below are relevant introductions about seat cooling: 1. Seat Ventilation: Many commonly used seat ventilation functions merely circulate air within the car between the seats. If the interior temperature is relatively high, the effect of seat ventilation is not very noticeable. The active original car air-conditioned seat ventilation starts from the principle of seat ventilation, supplying cold or warm air from the air conditioner to the fan through ducts to form an air-conditioned seat, but this process is more complex and costly. 2. Seat Heating: The working principle of seat heating is relatively simple. The seat is filled with electric resistance heating wires, sewn inside the seat cover, providing electric power to the heating wires to gradually warm the seat in a short time. A temperature sensor installed on the heating pad can monitor changes in seat temperature, control the power supply and cutoff of the heating wires, and maintain the seat heating temperature within an appropriate range.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.