···
Log in / Register

What is the fuel tank capacity of the Ford Edge?

4 Answers
MacBrianna
07/29/25 4:34pm

The fuel tank capacity of the Ford Edge is 69 liters, which is the officially announced data. Owners who have purchased the Ford Edge can also check this information on the vehicle's configuration sheet. The fuel grade for the Ford Edge is 92 octane, with a fuel consumption of 8.1 to 8.6L per 100 kilometers. A full tank of fuel can cover a distance of 802 to 852 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow from the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.

Was this review help?
11
4
Share
DeZoe
08/14/25 5:46am

I've been driving a Ford Edge for three years now, with a fuel tank capacity of approximately 18.8 gallons, which is about 71 liters. This is particularly practical for my daily commute. My round-trip to work is around 50 kilometers, and a full tank lasts me a whole week without needing to visit the gas station, saving me a lot of hassle and time. Models from different years, such as the 2019 and 2022 versions, are basically the same, but fuel consumption is slightly higher during highway driving. The advantage of a larger fuel tank is the peace of mind it provides for long trips, like driving to the suburbs for a weekend picnic—a 200-kilometer one-way trip without worrying about frequent refueling. It's also important to regularly check the fuel tank cap's seal to avoid evaporation loss, especially since gas prices aren't cheap these days. Using fuel wisely can save money and make driving smoother.

Was this review help?
9
2
Share
Expand All
LeChristopher
10/12/25 8:29am

As a car enthusiast, I'm quite satisfied with the fuel tank capacity of the Ford Edge. The official data shows 18.8 gallons (approximately 71 liters), which means a range of nearly 380 miles at an average fuel economy of 20 miles per gallon – pretty impressive. I enjoy keeping track of these figures because different road conditions, like city traffic congestion or highway cruising, can affect the actual range. For optimal fuel efficiency during testing, it's best to maintain a speed around 60 km/h. Note that the capacity hasn't changed significantly for models after 2021. If you're driving the Sport version, the engine tuning might be slightly more fuel-consuming, but the large tank compensates for it. By the way, here's a fueling tip: avoid overfilling to prevent spillage when topping up. With proper maintenance, long-distance driving becomes worry-free and hassle-free.

Was this review help?
2
5
Share
Expand All
McLeah
11/26/25 2:45am

Driving the Ford Edge on a trip, that 19-gallon fuel tank gave me great peace of mind. For the 1,200-kilometer journey from Beijing to Shanghai, filling up twice was enough, with just one stop for rest along the way. The tank size directly affects refueling frequency—my car consumes about 10 liters per 100 kilometers, so a full tank can easily cover around 600 kilometers. Checking the fuel tank condition before departure is crucial; any leaks or malfunctions should be repaired promptly to avoid mid-journey embarrassments.

Was this review help?
20
2
Share
Expand All
More Forum Discussions

Does wheel hub scraping require balancing?

Whether wheel hub scraping requires balancing depends on the situation: 1. If the degree of wheel hub scraping is not significant, dynamic balancing may not be necessary; 2. If the wheel hub scraping requires replacement with a new one, then dynamic balancing testing is needed. The wheel hub is the central part of the wheel, mounted on the axle to support the tire, typically cylindrical in shape, and usually equipped with bearings to reduce friction. Common wheel hubs include steel rims and aluminum alloy hubs. In the manufacturing of modern automotive components such as the body, wheel hubs, engine, and transmission, the use of composite materials is increasing. Composite materials are a new type of material, and wheel hubs made by selecting appropriate materials and processing methods offer advantages such as high strength, lightweight, good toughness, corrosion resistance, and wear resistance.
18
4
Share

Can a cracked front bumper be repaired?

Insurance bumper cracks can be repaired. First, use a professional plastic welding gun to melt the plastic welding rod and the surface of the film to achieve melting and bonding. Secondly, after repairing the crack, it is necessary to perform touch-up painting, and finally dry it. Below is relevant information: 1. Large-area cracks: Not recommended for repair, as even if it can be patched, it is difficult to ensure its buffering effect. In this case, it is necessary to replace the bumper with a new one. 2. The function of car bumpers: Car bumpers (anti-collision beams), located in most areas at the front and rear of the car, are designed to avoid the impact of external damage on the vehicle's safety system and have the ability to reduce injuries to drivers and passengers in high-speed collisions.
1
3
Share

How Many Styles of Volkswagen Car Keys Are There?

Volkswagen car key types are as follows: 1. Classic Key Series: The key features a square and minimalist design with three classic buttons and a chrome knob in the upper left corner. A gentle press releases the key, offering simplicity, convenience, and a dignified appearance. 2. Evolved Arc-shaped Design Series: This key differs from the traditional classic series and is exclusive to most models on the MQB platform. Its comfortable width-to-height ratio and ergonomic grip, along with the elegant curved edges, enhance its overall cohesive design. 3. Elegant Chrome Compact Key Series: The key is adorned with chrome silver accents on both top and bottom, adding a metallic texture. The design is flatter and more compact, providing an excellent feel in hand. This generation of keys emphasizes an elegant and sophisticated look, perfectly matching the quality of the vehicle models.
19
0
Share

What is the normal tire pressure for a Jetta?

The normal tire pressure for a Jetta is between 2.3 and 2.5 bar. The hazards of low tire pressure are: 1. Reduced tire lifespan; 2. Increased tire wear; 3. Low tire pressure can lead to elevated tire temperature after driving, which may cause a blowout, and the tire sidewall is prone to deformation during driving; 4. Decreased tire adhesion while driving, leading to abnormal bumpiness. Taking the 2019 Jetta as an example, it is a compact car with the following dimensions: length 4501mm, width 1704mm, height 1469mm, wheelbase 2604mm, minimum ground clearance 109mm, and a curb weight of 1120kg.
5
5
Share

What is the displacement of the Audi RS5?

Audi RS5 has a displacement of 2.9 liters. The Audi RS5 is equipped with a 2.9-liter twin-turbocharged V6 engine, which delivers a maximum power output of 331 kilowatts and a peak torque of 600 Newton-meters. This engine can produce its maximum torque between 1,900 and 5,000 revolutions per minute (rpm) and reaches its maximum power output between 5,700 and 6,700 rpm. The Audi RS5 features a full-time all-wheel-drive system and utilizes a crown gear differential. For suspension, the front employs a five-link independent suspension, and the rear also uses a five-link independent suspension. Audi's five-link front suspension is essentially a double-wishbone suspension, with Audi separating the wishbones into individual small links.
6
5
Share

What is the structure of automobile spokes?

The spokes of a car are divided into disc-type spokes and spoke-type spokes. The following is a detailed introduction about automobile spokes: 1. Definition: The part of the wheel that connects the rim and the hub is called the spoke. 2. Function: The spoke is a device that protects the wheel rim and spokes of the vehicle. 3. Characteristics: Its features include a pair of circular cover plates, the diameter of which is close to that of the wheel rim. There is a hole in the center of the cover plate larger than the wheel's rotating shaft, and there are openings near the edge of the cover plate. The edge of the cover plate has an annular wheel plate, the curved surface of which can closely fit with the curved surface of the wheel rim.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.