What is the fuel tank capacity of the Focus in liters?

What is the Haval GW4G15F engine?

Haval GW4G15F is a 150 horsepower version of the 1.5-liter turbocharged engine. This engine has a maximum power of 110kW, maximum torque of 210 Nm, maximum power speed of 5600 rpm, and maximum torque speed of 1800 to 4400 rpm. The engine is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc.

19

2

Share

Why doesn't the tire pressure monitoring system reset after tire repair?

Tire pressure monitoring does not reset after tire repair because the tire pressure system has not been reset. The car recognizes the original tire, so the tire pressure monitoring does not reset. Additionally, it could also be due to improperly installed sensors. Tire pressure monitoring automatically checks the tire pressure in real-time while driving and alerts the driver to leaks or low pressure to ensure driving safety. There are three common types of tire pressure monitoring systems: Direct TPMS: Direct TPMS uses pressure sensors installed in each tire to directly measure tire pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect TPMS: When the pressure in a tire decreases, the vehicle's weight causes that tire's rolling radius to shrink, making it rotate faster than the other tires. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect TPMS essentially relies on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS) overview: This system combines the advantages of both direct and indirect systems. It installs direct sensors in two diagonally opposite tires and includes a four-wheel indirect system. Compared to a full direct system, this hybrid system reduces costs and overcomes the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires like a direct system.

20

4

Share

What is the method for querying vehicle information through the license plate number?

Through the license plate number query vehicle information method is: 1. Go online and click to enter the online vehicle management office; 2. Click to enter the motor vehicle information query; 3. Input the type of license plate and the license plate number of the motor vehicle to be queried; 4. You can determine whether the vehicle needs to be queried by the body color, vehicle brand, driver, or file number. The license plate number is the plate that identifies the vehicle's identity, and its significance to the vehicle is like the ID number to a person. For example, if the license plate is from Guangzhou City, Guangdong Province, 'Yue' represents Guangdong Province, 'A' represents Guangzhou City, and 'Yue A' is the license plate code for Guangzhou City.

20

3

Share

Must the clutch be pressed when braking to decelerate in Subject Three?

Subject Three requires pressing the clutch when braking. The requirements for vehicle speed are relatively high, and it generally involves high-speed driving. The higher the speed, the greater the inertia. If the clutch is pressed first, the vehicle's inertia will be even greater, potentially leading to the dangerous situation of coasting in neutral. Therefore, when decelerating at high speeds, you should first apply the brake to reduce the speed to a certain level, then press the clutch to downshift and further reduce the speed. The road driving skills test for Subject Three generally includes: 1. Contents: Vehicle preparation, simulated lighting test, starting, driving straight, gear shifting operations, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. Time: Starting from June 1, 2021, the interval for scheduling the Subject Three test was adjusted from 30 days after passing Subject One to 20 days. For those applying for a medium or large passenger or truck driver's license, the interval for scheduling the Subject Three test was adjusted from 40 days after passing Subject One to 30 days.

9

0

Share

Does a Higher Seat Position in Subject 2 Require Earlier Reference Points?

In Subject 2 driving test, a higher seat position requires earlier reference points. When the seat is adjusted higher, each operation should be performed slightly earlier. Conversely, when the seat is lowered, the timing of operations can be slightly delayed. According to the "three-point alignment" principle, these points refer to the driver's eyes, a specific reference point on the vehicle, and the third point where the line connecting these two points projects onto the ground. If the seat height allows better visibility of blind spots beneath the front hood, when aligning the vehicle using a specific reference point, sticking to the original method might actually position the vehicle too far forward, risking crossing the line. Therefore, steering earlier becomes necessary. Conversely, if seated too low, following the original reference point method might leave the vehicle still far from the boundary line, requiring a slight delay in steering operations.

15

5

Share

How to Determine Prolonged Occupancy of the Overtaking Lane?

Methods to determine prolonged occupancy of the overtaking lane: using the overtaking lane as a regular driving lane without the purpose of overtaking, thereby hindering other vehicles from overtaking. The overtaking lane on highways is designated for vehicles that are overtaking or meet the required speed standards. However, some drivers occupy this lane for extended periods, forcing other vehicles to overtake from the slower regular driving lanes. Prolonged use of the overtaking lane increases the speed differential with vehicles attempting to overtake, leading to hazardous situations when overtaking from the regular lanes, as it further widens the speed gap with vehicles already traveling there, raising the risk of accidents. The overtaking lane is the leftmost lane on a highway and is only present on highways that meet the standards of a six-lane dual-carriageway.

4

1

Share

What is the fuel tank capacity of the Focus in liters?

What is the Haval GW4G15F engine?

Why doesn't the tire pressure monitoring system reset after tire repair?

What is the method for querying vehicle information through the license plate number?

Must the clutch be pressed when braking to decelerate in Subject Three?

Does a Higher Seat Position in Subject 2 Require Earlier Reference Points?

How to Determine Prolonged Occupancy of the Overtaking Lane?

What are the penalties for not using vehicle lights according to regulations in Shanghai?

Are External Tire Pressure Monitoring Systems Safe?

Where is the car windshield washer button located?

What Causes the Tire Pressure Warning to Display When the Tires Are Inflated?