What is the fuel tank capacity of the Fengshen AX4?

2 Answers
AngeloLee
07/28/25 3:21pm
The fuel tank capacity of the Fengshen AX4 is 45 liters, which is the officially announced data. Owners who have purchased the Fengshen AX4 can also check this information on the vehicle's configuration sheet. The Fengshen AX4 uses 92-octane fuel, with a fuel consumption of 6L per 100 kilometers. A full tank of fuel can cover a distance of 750km. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow from the tank.
Was this review help?
7
0
Share
DallasLynn
08/11/25 10:52pm
The fuel tank capacity of the Fengshen AX4 is 42 liters, which feels quite suitable for my daily use. Filling up once a week is generally sufficient, with city driving consuming about 7 liters per 100 kilometers, giving a range of approximately 600 kilometers; it can go even farther on highways. When refueling, I opt for 92-octane gasoline and fill it up to about 80% to avoid fuel pump overheating or waste. Additionally, regular inspection of the fuel system can prevent clogging from impurities and extend the fuel pump's lifespan. This car is economical and practical, with a fuel tank size that balances space and range, making it worry-free for family use. Fuel consumption increases slightly when using air conditioning in summer, but overall, it doesn’t affect the experience.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

Is the 6AT Transmission Prone to Water Intake?

6AT transmissions are prone to water intake. Below are solutions for transmission water intake: 1. Clear water intake: Avoid driving and running the engine as much as possible. In this case, water will settle at the bottom of the transmission gear oil. Open the drain screw at the bottom of the transmission to completely drain the water and oil, then refill with new gear oil. 2. Dirty water or muddy water intake: If the vehicle is driven or the engine is run after clear water intake, the water and oil will emulsify due to high-speed mixing inside the transmission, making it difficult to separate the oil and water. In this scenario, the transmission must be removed and opened for cleaning. If sand or mud enters the bearings, especially the input shaft bearing, all components inside the transmission must be disassembled and cleaned.
9
3
Share

What is the vehicle type on the minibus driving license?

The vehicle type on the minibus driving license is specifically classified based on the vehicle length and the number of passengers. As long as the classification conditions are met, the corresponding license will be issued during registration. The vehicle classification is as follows: 1. Large: vehicle length ≥6m or passenger capacity ≥20. The passenger capacity is variable and determined by the upper limit. The passenger count includes the driver. 2. Medium: vehicle length <6m, passenger capacity >9 and <20. 3. Small: vehicle length <6m, passenger capacity ≤9. 4. Mini: vehicle length ≤3.5m, total engine cylinder displacement ≤1 liter.
5
4
Share

What does CVT continuously variable transmission simulating 8 gears mean?

To achieve the manual-automatic transmission function, an 8-speed forward gear is simulated, providing 8 gear positions in manual mode. The introduction to CVT simulated shifting is as follows: 1. Introduction: CVT is a continuously variable transmission, theoretically offering an infinite number of gear ratios. To enable the manual-automatic function, the gear positions in manual mode are simulated. Strictly speaking, there is no difference between them, except that the latter offers 8 speeds in manual mode. 2. Difference from AT: The smoothness and fuel efficiency of CVT transmissions surpass those of AT transmissions, but the strength of power transmission and the capability to handle maximum peak torque are not as high, and the extreme acceleration ability is inferior to AT models. 3. Explanation: Driving a CVT is not much different from driving a traditional automatic transmission. The 8-speed is just a simulated gear position. The manual-automatic feature means that a manual mode is added on top of the automatic transmission, allowing for manual gear shifting operations.
7
0
Share

Can 0 Points and 0 Fines Be Handled Online?

It cannot be processed directly online. Tickets with 0 points and 0 fines are handled in the same way as those with points and fines. Bring your ID card, driver's license, and the vehicle registration certificate of the offending vehicle to the traffic violation window of the traffic management department for processing according to regulations. Here are some notes about traffic violations: 1. Violations can be processed all at once or selectively, and you can raise objections to the violations and apply for administrative reconsideration. 2. If you have no objections to the violations, after completing the driver's license point deduction, you will receive a violation processing notice and a fine ticket. You can take the violation ticket to the designated payment bank to pay the fine.
1
3
Share

Do You Need to Press the Brake to Start with One-Button Start?

Currently, automatic transmission vehicles have two design modes: one requires pressing the brake to start, while the other can start without pressing the brake. Here is some information about one-button start: 1. Introduction: The car one-button start is a part of smart car systems, serving as a button device that simplifies the ignition process and can also turn off the engine. It can be installed in place of the original key lock or as an independent panel. 2. Functions: The smart system of one-button start includes automatic unlocking, automatic locking, automatic window closing, automatic anti-theft, one-button start, one-button shutdown, automatic locking before driving, automatic unlocking when parking and shutting down, and an additional trunk opening function.
3
5
Share

Where is the towing hook on the Audi A6L?

Audi A6L's towing hook is located next to the spare tire in the vehicle's trunk. Here is some relevant information: 1. Introduction to the Audi A6L: The Audi A6L is the first Audi model to enter the Chinese market, with its predecessor being the third-generation Audi 100 (code C3) introduced in China in 1988. 2. Body structure of the Audi A6L: The new Audi A6L is closer to the Audi flagship model—the Audi A8—in terms of body lightweight technology. The new Audi A6L adopts a steel-aluminum composite body structure, with aluminum components of different processes used in the front suspension tower top, suspension tower top reinforcement bar, front and rear suspension structural components, and front and rear bumper impact beams, reducing the body weight (including doors and covers) by 16 kilograms.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.