What is the fuel tank capacity of the es200?

1 Answers
LaCooper
07/24/25 2:51pm
The luxury version and the premium version of the es200 both have a fuel tank capacity of 60L. These two models are equipped with a 2.0L 173-horsepower engine. This data is announced by the car manufacturer, and owners who have purchased the es200 can also check it on the car's configuration sheet. The fuel grade for the es200 is 92 octane, with a fuel consumption of 8.1L/100km for both models. A full tank of fuel can cover a distance of 741km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. Generally, the fuel level is observed through the fuel gauge inside the car. If there are no other issues, the fuel level will accurately reflect on the gauge. The fuel gauge on the dashboard usually has 5 to 6 segments. When the fuel gauge shows only 2 segments remaining, it is advisable to refuel to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is reserved to allow the fuel to expand when the temperature rises without overflowing the tank's safety space. If fuel is filled up to the tank opening during refueling, the actual amount of fuel may exceed the marked tank capacity.
Was this review help?
17
0
Share
More Forum Discussions

Why does the car make a humming noise at low speeds?

The reasons for a car making a humming noise at low speeds are as follows: 1. Engine noise: The noise from the vehicle's engine varies with different engine speeds. 2. Road noise: Road noise occurs when the vehicle is moving at high speeds, caused by wind cutting in and creating noise, as well as vibrations from the chassis being driven. Additionally, gravel and sand hitting the car's chassis can also produce noise. 3. Tire noise: Tire noise is generated when the vehicle is moving at high speeds due to friction between the tires and the road surface. The level of tire noise depends on road and vehicle conditions; worse road conditions lead to louder tire noise. Moreover, there is a significant difference in tire noise between asphalt and concrete roads. 4. Wind noise: Wind noise refers to the pressure of oncoming wind exceeding the sealing resistance of the car doors and entering the cabin when the car is moving at high speeds. The faster the speed, the louder the wind noise. 5. Resonance noise and others: The car body itself acts like a box, and sound has the properties of refraction and overlapping. When sound enters the cabin, without sound-absorbing and sound-insulating materials to absorb and block it, the noise will continuously refract and overlap, forming resonance noise.
4
3
Share

Should the Air Conditioning Be Turned Off When the Car Is Turned Off?

It is necessary to turn off the air conditioning when the car is turned off. Below are some related additional information: 1. Disadvantages of not turning off the air conditioning: When the vehicle is started next time, the engine will start with the load of the air conditioning, and such a high load can damage the engine. After parking, the evaporator for cooling will adsorb many small water droplets on its surface. If left unattended, bacteria will breed inside the evaporator over time, and a musty odor will be produced. 2. Maintenance of car air conditioning: Regularly clean and replace the air conditioning filter, as the air conditioning filter is an air filtration device that can filter out dust particles, harmful particles, and other dirt from the air before it enters the cabin. However, after prolonged use, the filter will become clogged with these particles, gradually affecting the cooling efficiency of the air conditioning and increasing fuel consumption. Regularly clean the radiator and condenser, as the radiator and condenser are located in the engine compartment at the front of the car and are used for heat dissipation. Over time, they can also become dirty, affecting the cooling efficiency of the air conditioning and increasing fuel consumption. Therefore, these two areas, as well as the engine compartment, should be cleaned before the summer season begins.
7
1
Share

How to Remove the Turn Signal Light on the Rearview Mirror of MG ZS?

Use a flat-head screwdriver to pry open the edge of the turn signal light on the rearview mirror, creating a small gap. Then, remove the other screw securing the turn signal light below, separating the turn signal from the rearview mirror base to finally remove it. The detailed steps are as follows: 1. Prepare all the tools needed for the entire process of removing the rearview mirror turn signal light. Use a flat-head screwdriver to pry open the gap between the rearview mirror housing and the base. Once partially pried open, gently pull the mirror housing upward to remove it. 2. Use a larger flat-head screwdriver to carefully pry open these clips, then gently pull the rearview mirror lens to separate it from the base. After removing the rearview mirror lens, you will see the screw securing the turn signal light. Use a T-10 spline to remove this screw, then remove the other screw securing the turn signal light. Keep the removed screws safely stored. 3. Remove the rearview mirror turn signal light, which is now separated from the rearview mirror base. Disconnect the wiring harness plug to completely remove the turn signal light.
9
4
Share

How to Check If You Have Any Vehicles Under Your Name?

You cannot check vehicle license plate numbers online using your ID card and name. You need to bring your ID card to the local vehicle management office for inquiry. Below is a detailed introduction on how to check vehicle information under your name: 1. Personal Vehicles: Provide the original and a copy of the vehicle owner's identity proof. 2. Company Vehicles: Provide the original and a copy of the company's organization code certificate, a power of attorney from the legal representative, and the original and a copy of the handler's ID card. 3. Required Documents: Original and a copy of the vehicle registration certificate. 4. Inspection and Law Enforcement Agencies: Present a company letter of introduction (specifying the inquiry requirements, handler's name, work ID number, etc.), the original and a copy of the handler's work ID to inquire about vehicle information. 5. Lawyers: Present the court's case acceptance notice, a company letter of introduction, and the original and a copy of the lawyer's license.
18
3
Share

How many kilometers does a new car need to replace spark plugs?

Under normal maintenance conditions, car spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. The following standards can be referenced for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps to replace spark plugs: Open the engine hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check for any external debris such as leaves or dust, and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires according to the firing order, and secure the cover.
13
0
Share

Does Crystal Coating Liquid Harm Car Paint?

Crystal coating does not harm car paint. Automotive crystal coating provides reliable paint surface sealing technology, offering efficient and long-lasting protection for the car paint, preventing environmental impacts on the paint color. A water droplet experiment showed that after 12 months of use, the car paint surface remained perfectly intact, demonstrating the effectiveness of automotive crystal coating technology. Here are the benefits of automotive crystal coating: 1. Scratch resistance: With a hardness of 6H, compared to the 2H hardness of ordinary car paint, it prevents most minor scratches and has an elastic recovery function, protecting the vehicle from daily minor scratches and reducing paint surface scratches by over 70% compared to regular coatings. When external forces exceed the elastic protection range of the crystal, it usually only leaves scratches on the crystal without damaging the paint surface. 2. Corrosion resistance: The ultra-fine nano-crystal layer isolates the paint surface from the external environment, effectively preventing oxidation and resisting corrosion from bird droppings, insect residue, acid rain, etc. 3. No cracking: It resists UV rays, extreme heat, and cold, with a temperature resistance range of -50°C to 300°C, adapting to a wide range of temperature changes without cracking or peeling.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.