What is the fuel tank capacity of the Dongfeng Fengguang 580?

2 Answers
DeRebecca
07/25/25 9:42pm
The fuel tank capacity of the Dongfeng Fengguang 580 is 58L, as officially announced. The Dongfeng Fengguang 580 uses 92-octane fuel, with a fuel consumption of 6.8-7.6L per 100 kilometers. A full tank can cover a distance of approximately 763 to 853km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel gauge accurately reflects the remaining fuel. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, leaving some space between the safe fill level and the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
12
4
Share
MacNadia
08/11/25 10:21pm
I've been driving my Dongfeng Fengguang 580 for almost two years now, and its fuel tank capacity is about 58 liters, which is quite reasonable among SUVs in its class. With a full tank, I can travel over 500 kilometers, making it especially suitable for weekend family trips and saving a lot of refueling time. For daily city commuting, I usually refuel every 7 to 10 days, and I make sure to choose gas stations with good reputations to avoid poor fuel quality affecting the engine. Fuel tank capacity is also related to fuel consumption; my car averages around 10 liters per 100 kilometers. I recommend that beginners consider the range issue more when buying a car, not just the appearance. During regular maintenance, checking whether the fuel pump and pipelines are corroded can prevent malfunctions and extend the service life.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

What is the passing score for driving license tests Subject 2 and Subject 3?

Generally, a score of 80 points is required to pass Subject 2, while a score of 90 points is required to pass Subject 3. The passing standards for driving license tests Subject 2 and Subject 3 are as follows: 1. The full score for Subject 2 is 100 points. For applicants of large buses, tractors, city buses, medium-sized buses, and large trucks, a score of 90 points is required to pass; for other vehicle types, a score of 80 points is required. 2. The full score for Subject 3 is 100 points. Applicants for large vehicles, tractors, city buses, medium-sized buses, and large trucks must achieve 90 points; applicants for other vehicle types must achieve 80 points.
3
1
Share

Can Drivers Wear Sandals While Driving?

Traffic regulations do not prohibit wearing sandals while driving, but they do prohibit driving in slippers. Sandals without straps are considered the same as slippers. The following laws stipulate that driving in slippers is not allowed: 1. The "Road Traffic Management Regulations" clearly state that motor vehicle drivers are not allowed to drive in slippers. In the event of an accident, if one of the drivers involved is wearing slippers, even if that driver is not at fault for the entire accident, the responsibility for the accident will be borne by the other party, and the driver wearing slippers will still face penalties from the traffic police for driving in slippers. 2. After the implementation of the new "Road Traffic Safety Law," there are specific provisions regarding driving in slippers: behaviors such as wearing slippers, high heels with heels over 4 centimeters, driving barefoot, or holding a phone while talking are prohibited as they hinder safe driving. Drivers who violate these regulations will be deducted 2 points and fined a certain amount.
8
5
Share

What are the general items included in car maintenance?

Car maintenance items include: 1. Changing the engine oil and oil filter; 2. Air filter; 3. Fuel filter; 4. Transmission fluid; 5. Tire maintenance. Below is additional information on car maintenance: 1. Major maintenance builds upon regular maintenance, requiring the replacement of the air filter and fuel filter in addition to the engine oil and oil filter. 2. Major maintenance and regular maintenance can be alternated, with intervals varying by car brand, and should follow the manufacturer's recommendations. Engine oil is the lubricant for the engine, and to ensure optimal performance, it should be replaced periodically. The replacement cycle depends on the oil's effective lifespan. During operation, the engine draws in a large amount of air, and the dust in the air can accelerate wear on the piston group and cylinder. The air filter's role is to remove dust and particles from the air, ensuring that sufficient and clean air enters the cylinder.
4
4
Share

What Causes Vehicle Shaking at Low Speeds?

Vehicle shaking at low speeds may be caused by the following reasons: 1. A dirty throttle body or excessive carbon buildup in the fuel injectors. A dirty throttle can prevent it from closing properly or cause the idle stepper motor to stick, both of which can result in excessively high engine idle speed. Carbon deposits generated during engine operation can also lead to vehicle shaking. 2. Worn engine mounts. Engine mounts are responsible for absorbing minor vibrations during engine operation. If the mounts are faulty, these vibrations can transfer to the steering wheel and cabin, causing shaking at idle. 3. The engine may experience increased load when electrical systems are turned on, leading to a drop in idle speed. To compensate for the shaking caused by this drop, the engine automatically increases the RPM slightly. 4. When replacing tires or rims, a tire balance should always be performed. Otherwise, uneven weight distribution can easily cause steering wheel shaking. Deformed rims, uneven rim weight distribution, or incorrect rim angles can all cause shaking while driving.
8
0
Share

Under what conditions do cars emit the highest levels of carbon monoxide?

Idling with the engine running produces the most carbon monoxide emissions. Principle: When a car engine's combustion chamber operates at high temperatures, it is more prone to producing carbon monoxide. When idling with the engine running but no load, the fuel burns without doing work, causing the combustion chamber temperature to remain high, thus increasing carbon monoxide production. Here are methods to reduce vehicle emissions: 1. Turn off electrical devices after exiting the car: including the radio, air conditioning, and window heating systems. 2. Proper tire pressure saves fuel: Insufficient tire pressure shortens tire lifespan. Tests show that maintaining manufacturer-recommended tire pressure can reduce fuel consumption by approximately 3.3%. 3. Accelerate gently: A single hard acceleration versus gentle acceleration at the same speed can result in a 12mL difference in fuel consumption, leading to an extra 0.4g of CO2 emissions per kilometer.
3
1
Share

How to Shift Gears at a Red Light in an Automatic Transmission Car?

When waiting at a red light in an automatic transmission car, the appropriate gear to shift into depends on the duration of the red light. The shifting recommendations are as follows: 1. If the red light is less than 30 seconds, it is recommended that the driver simply keep their foot on the brake. 2. If the red light lasts between 30 seconds and 1 minute, the driver should shift into N (Neutral) gear and engage the handbrake. 3. For red lights longer than 1 minute, it is advisable to shift into P (Park) gear and engage the handbrake. Below are some general driving tips for automatic transmission cars: 1. Shifting gears at a red light: For short red lights, it is recommended to shift into P or N gear for lower fuel consumption; on a slope, shifting into P gear is advisable; on flat roads, remember to engage the handbrake when in N gear to prevent accidents. 2. Starting the car in P gear: When starting the car, shifting from P to D gear passes through R (Reverse) gear, which can cause a reverse impact on the transmission, potentially damaging it over time and harming the vehicle.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.