What is the fuel tank capacity of the Crown car?

1 Answers
HopeLynn
07/30/25 12:23am
The fuel tank capacity of the Crown car is 70 liters. Fuel tanks are structurally divided into open-type and closed-type. The Crown is a 4-door 5-seater mid-to-large sedan under the Toyota Group, with body dimensions of 5020mm in length, 1805mm in width, 1480mm in height, and a wheelbase of 2925mm. The Crown is equipped with a 2.0T turbocharged engine, delivering a maximum torque of 350 N·m, with the maximum torque range between 1650 to 4400 rpm. It features a front-engine rear-wheel-drive layout, with a double-wishbone independent front suspension and a multi-link independent rear suspension.
Was this review help?
16
2
Share
More Forum Discussions

Is the Sagitar compliant with China 6 emission standards?

The Sagitar meets the China 6 emission standards. Here are relevant details about the new Sagitar: 1. Exterior: The all-new Sagitar adopts the latest family design language, appearing more contemporary than its predecessor. A wide hexagonal chrome grille spans the entire front fascia, seamlessly connecting with the polygonal headlight clusters on both sides. The all-new Sagitar is the world's first model to feature exterior ambient lighting, with lighting elements integrated into the front grille, fender side badges, and door handles. 2. Interior: The all-new Sagitar offers dual-tone interior options. The dashboard tilts toward the driver's side, combining avant-garde styling with practicality. Interior materials have been significantly upgraded compared to the previous model, featuring piano black lacquer panels, extensive soft-touch panels, and leather-wrapped door trims that enhance premium detailing. The cabin excels in material quality, craftsmanship, and functionality. The leather-wrapped three-spoke multifunction steering wheel provides excellent grip, with controls integrating entertainment system functions and cruise control settings. The 10.2-inch full LCD instrument cluster offers high playability and information richness with excellent display quality.
10
1
Share

What to Do If 95 Octane Gasoline Was Accidentally Filled with 92 Octane?

You need to purchase a fuel additive that enhances anti-knock properties. After using it, wait until the 92 octane gasoline is almost used up, then refill with 95 octane gasoline. Below is an introduction to the differences between 92 and 95 octane gasoline: 1. Different proportions of n-heptane and isooctane: 95 octane gasoline contains 95% isooctane and 5% n-heptane; 92 octane gasoline contains 92% isooctane and 8% n-heptane. 2. Different anti-knock properties: The octane number is the target for gasoline's anti-knock performance. The higher the octane number, the stronger the anti-knock performance. The higher the compression ratio, the higher the pressure in the combustion chamber. If gasoline with lower anti-knock properties is used, knocking is more likely to occur. Since 95 octane gasoline has a higher octane content than 92 octane gasoline, its anti-knock performance is better. The anti-knock index of 95 octane gasoline is 90, while that of 92 octane gasoline cannot be less than 87.
8
5
Share

Can a 48V Electric Vehicle Use a 60V Battery?

A 48V electric vehicle cannot use a 60V battery because the electronic components of a 48V electric vehicle are generally designed for 48V operation. Using a 60V battery may cause damage to the electronic components. Below is an introduction to electric vehicles: 1. Composition of an electric vehicle: An electric vehicle is a lightweight and flexible means of transportation, making it very suitable for urban road use. The structure of an electric vehicle is quite simple, with key components including the frame, motor, battery, and electronic control system. 2. Electronic control system: The electronic control system is responsible for regulating the vehicle's circuits. Without the electronic control system, the electric vehicle cannot operate properly. The electronic control system is usually installed under the rear seat and can be replaced separately if damaged. 3. Battery: The battery is a crucial component of an electric vehicle, supplying power to all electronic devices. However, the battery is also a wear part that requires regular replacement. As the number of charge and discharge cycles increases, the battery's performance will degrade, necessitating periodic replacement. During charging or discharging, ions in the battery move through the electrolyte, and some ions undergo chemical reactions with the electrolyte. As the number of charge and discharge cycles increases, the number of ions in the battery may decrease, leading to a reduction in battery performance.
15
0
Share

What is the Difference Between 30 and 40 Oil Viscosity?

The differences between 30 and 40 oil viscosity are as follows: 1. Viscosity: 40-grade oil has higher viscosity than 30-grade oil. 2. Applicable temperature: 40-grade oil is suitable for higher maximum temperatures compared to 30-grade oil. 3. Fluidity: 30-grade oil has better fluidity than 40-grade oil, which helps reduce fuel consumption and dissipate engine heat faster. 4. Stability: 40-grade oil offers better oil stability under extremely high engine temperatures compared to 30-grade oil. Here is more relevant information: 1. Oil viscosity rating: The numbers indicate viscosity specifications. For example, in "15W-40," the "W" stands for Winter. The smaller the number before "W," the better the oil's low-temperature fluidity, meaning it can be used in lower environmental temperatures and provides better engine protection during cold starts. 2. Letter representation: Oil grades are represented by a combination of two letters. The "S" series represents oil for gasoline engines, with specifications ranging from SA to SN (in alphabetical order, excluding SI). Each subsequent letter indicates improved oil performance, with more additives to protect the engine.
6
2
Share

What Are the Reasons for the Incomplete Retraction of a Loader Bucket?

The occurrence of this phenomenon is mainly due to insufficient structural strength in the working device, leading to plastic deformation. Below is relevant information: Loader: A loader is a type of earth-moving machinery widely used in construction projects such as highways, railways, buildings, hydropower, ports, and mines. It is primarily used for shoveling and loading loose materials like soil, sand, gravel, lime, and coal, and can also perform light digging operations on ores and hard soil. By equipping different auxiliary working devices, it can also be used for bulldozing, lifting, and handling other materials such as timber. Working Device: The shoveling and loading operations of a loader are achieved through the movement of its working device. The working device of a loader consists of the bucket (1), boom (2), connecting rod (3), rocker arm (4), bucket cylinder (5), and boom cylinder (6). The entire working device is hinged on the frame (7). The bucket is connected to the bucket cylinder via the connecting rod and rocker arm for loading and unloading materials. The boom is hinged to the frame and the boom cylinder to raise and lower the bucket. The tilting of the bucket and the lifting of the boom are hydraulically controlled.
13
2
Share

When was the CA10 model automobile born?

On July 13, 1956, the first Jiefang CA10 truck rolled off the production line. The Jiefang CA10 truck was modeled after the ZIS-150 truck produced by the Stalin Automobile Plant in Moscow, Soviet Union, with an empty weight of 3.9 tons. Below is more detailed information about the Jiefang CA10 truck: 1. The truck featured rear axle drive, an empty weight of 3.9 tons, and was equipped with an inline water-cooled six-cylinder four-stroke gasoline engine with a power output of 66 kW. It had a maximum speed of 65 km/h, a load capacity of 4 tons, could tow up to 4.5 tons, and had a fuel consumption of 29 liters per 100 km. 2. This vehicle was characterized by good speed stability after engine start, safe and reliable braking system, sturdy structure, and long service life. It was more suitable for China's large-scale construction, conditions of raw material and fuel supply, as well as road and bridge load capacities, and could be modified for various purposes as needed. Later, improved models such as the CA15, including CA15K and CA15J, were produced. These models resembled the CA10 in appearance but had a load capacity of 5 tons, an engine power of 85 kW, and a top speed of 80 km/h.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.