What is the fuel tank capacity of the Crosstour?

1 Answers
VanLouis
07/30/25 5:23am
The fuel tank capacity of the Crosstour is approximately 70 liters. Additional information: Interior: The interior design focuses on creating a fashionable and premium feel, featuring two color schemes - elegant deep black and warm luxurious light ivory. The integrated center console adopts an expansive layered design, with newly added high-gloss metal trim and matte straight-line wood grain panels adding a touch of technological sophistication. Powertrain: The 2012 Crosstour 2.4L model is equipped with Honda's advanced i-VTEC engine, which has undergone comprehensive optimization and tuning. It delivers a maximum power output of 144kW at 7000rpm and a maximum torque of 222Nm at 4400rpm, achieving the strongest performance among Honda engines of the same displacement. The newly matched 5-speed automatic transmission has also been optimized for gear ratios.
Was this review help?
5
2
Share
More Forum Discussions

Is 98 More Durable Than 95?

98-octane gasoline is not necessarily more durable than 95-octane. A higher octane rating does not mean better gasoline quality, as there is no direct correlation between gasoline octane ratings and fuel quality. Below are the relevant details: 1. The octane rating of gasoline only represents its octane value. Both 95-octane and 98-octane gasoline are high-octane fuels. Compared to 95-octane, 98-octane gasoline has an octane value that is 3 units higher. Increasing the octane value of unleaded gasoline by even one unit requires greater technical difficulty and higher processing costs. Therefore, high-octane gasoline is priced higher than low-octane gasoline. 2. Different engines use gasoline with different octane ratings, primarily determined by the engine's compression ratio. Generally, engines with a compression ratio above 8.0 should use 92-octane gasoline; those above 9.0 should use 95-octane gasoline, and engines with a compression ratio above 10.0 should use 98-octane gasoline.
17
4
Share

What Taxes Are There on Imported Cars?

Imported cars are subject to the following taxes: customs duty, value-added tax, and consumption tax. Below are the relevant details: 1. Tax rate = basic customs duty (25%) + consumption tax (10%-40%) + value-added tax (17%) + others (mainly depends on displacement), totaling approximately 120%. The customs duty mainly depends on the displacement of the imported car; different displacements and brands result in different customs duties. 2. Vehicle displacement and consumption tax: 1% for displacements up to 1.0L (inclusive); 3% for displacements above 1.0L up to 1.5L (inclusive); 5% for displacements above 1.5L up to 2.0L (inclusive); 9% for displacements above 2.0L up to 2.5L (inclusive); 12% for displacements above 2.5L up to 3.0L (inclusive); 25% for displacements above 3.0L up to 4.0L (inclusive); 40% for displacements above 4.0L.
14
5
Share

What do the gear letters on an automatic transmission car represent?

Automatic transmission gear letters represent the following: 1. P stands for Park, used when the car is parked and not in use. In this position, the wheels are mechanically locked to prevent rolling. 2. R stands for Reverse, used when backing up. 3. N stands for Neutral, used for temporary stops (such as at a red light). To prevent the vehicle from rolling on a slope, the brake must be applied. 4. D stands for Drive, also known as the driving gear, used when moving forward. 5. L stands for Low gear, used when going downhill or on long descents. This limits the car to the lowest gear, allowing the engine to assist in braking, reducing the need for prolonged brake use and preventing brake overheating. 6. S stands for Sport mode. When engaged, gears can be freely switched, but the shift timing is delayed to keep the engine at higher RPMs for increased power. This mode significantly increases fuel consumption.
17
3
Share

Where is the terminal device number of the car?

The terminal device number of a car can usually be found on the vehicle's driving license, which corresponds to the last six digits of the vehicle identification number (VIN). The VIN, also known as the vehicle identification code, is an alphanumeric sequence typically consisting of 17 characters. Currently, there are two main standards for vehicle identification numbers: the EU's ISO 3799 standard and the North American standard, with the latter being more stringent and compatible. Under the North American VIN standard, the specific meanings of the digits are as follows: 1. Digits 1 to 3 represent the manufacturer, brand, and type. 2. Digits 4 to 8 indicate vehicle characteristics, including vehicle type, chassis, engine model, rated weight, and other details. 3. The 9th digit is a check digit. 4. The 10th digit represents the vehicle's production year. 5. The 11th digit indicates the assembly plant where the vehicle was produced. 6. The last six digits are the vehicle's production serial number.
11
3
Share

How Deep of Scratches Can Polishing Remove?

Car polishing can remove scratches. For issues like oxidized, dull, or lackluster car paint, as well as scratches on the body, car polishing can effectively address these problems, making the paint surface smoother and shinier. Additionally, car polishing can clean the body, effectively removing dirt and corrosive substances, thereby restoring the cleanliness of the paint surface. Polishing the car body before waxing or sealant application can enhance the results and prolong the duration of the effects. The main functions of car waxing are: 1. Waterproofing and protecting against acid rain. Car waxing provides a certain level of protection for the car's paint surface and also reduces the amount of water droplets adhering to the body, with very noticeable effects; 2. Another function is to prevent damage from high temperatures and strong UV radiation, as temperatures rise with changing weather conditions; 3. During driving, high temperatures can cause the car's paint to age. At this point, waxing serves to reflect light, slowing down the aging process of the paint.
16
0
Share

What does the inspection validity period mean?

The inspection validity period refers to the valid period of the driver's license inspection. The inspection validity period on the driver's license indicates the valid duration for which the license can be used. For a first-time issued driver's license, the validity period is 6 years. For example, if the initial date of the driver's license is December 5, 2012, with a validity period of 6 years, the license will expire on December 5, 2018. Below are the required documents for driver's license inspection: 1. Identification: Resident ID card (a temporary residence permit is also required for those holding ID cards from other provinces or cities) and a copy. 2. Original driver's license: The original motor vehicle driver's license and the currently held driver's license. 3. Photos: Three recent 1-inch color photos with a white background. 4. Medical report: A qualified medical examination report from a district or county-level hospital or above. Such hospitals usually have medical examination points near the vehicle management office or traffic police station. 5. Application form: The applicant should obtain the "Motor Vehicle Driver's License Application Form" from the vehicle management office and fill it out according to the instructions.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.