What is the fuel tank capacity of the Chery Tiggo 3?

How to Set Automatic Door Lock for Nissan Classic Sylphy?

To set the automatic door lock for Nissan Classic Sylphy, follow these steps: 1. Put the gear in P position. 2. Turn the key to the ON position (do not start the engine) and close all four doors. 3. Press and hold the lock button (LOCK) for 6 seconds. 4. Observe the hazard indicator flashing twice on the dashboard. 5. The setup is complete. To disable the automatic door lock function, repeat steps 1, 2, and 3; the arrow warning light will flash once, indicating the function is turned off. Below is an introduction to the automatic door lock function: 1. The purpose of the automatic door lock is anti-theft. It quickly locks the doors after driving starts, preventing door pull robberies during traffic jams or at red lights, providing a certain level of security. It also protects child passengers inside the car by preventing young children from opening the door handles while the car is moving. 2. The automatic door lock while driving is a safety measure. The vehicle's computer detects when the car is about to move and automatically locks all doors. There are various detection methods, with most using speed as the criterion—locking automatically when the preset speed (usually 10~20 km/h) is reached. Some vehicles automatically lock the doors when the driver shifts into D gear.

12

2

Share

What Type of Engine Oil Does the Teana Car Use?

The official manual of the Teana car recommends engine oil models 5W-30SN and 0W-40SN. Any engine oil model that meets these specifications can be used. If you want to change the engine oil during later maintenance, you can choose brands such as Shell, Mobil, or Castrol. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Teana car is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain; Use a special wrench to remove the oil filter; Apply engine oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine valve cover, usually filling up to three-quarters of the bottle; Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check if the engine oil level is within the standard range.

3

5

Share

How to reset the tire pressure light on a Golf?

The tire pressure reset button for the Golf is located on the gear lever panel. Press and hold the SET button on the gear lever for 3 to 5 seconds until you hear a beep, indicating that the tire pressure reset is complete. The tire pressure warning light on the dashboard will then disappear automatically. The tire pressure reset button for the Golf is located on the lower part of the center console as the tire pressure monitoring indicator button. There are two types of calibration for the tire monitoring indicator: Type A and Type B. For the Golf's tire monitoring indicator (Type B), recalibration is required after changing tire pressure or replacing one or more wheels. Recalibration is also necessary after wheel rotation (e.g., front-to-rear wheel rotation).

5

2

Share

Is the Mazda 8 imported?

Mazda 8 has both imported and domestically produced models. It is an MPV under the Mazda brand. The domestically produced Mazda 8 is equipped with two types of engines: a 2.3L naturally aspirated engine and a 2.5L naturally aspirated engine. Below are the relevant details: 1. The Mazda 8 offers a spacious interior. The dimensions of this vehicle are 4860mm in length, 1852mm in width, and 1685mm in height, with a wheelbase of 2950mm. The 2.3L naturally aspirated engine delivers a maximum power of 113kW and a maximum torque of 205Nm, with peak power achieved at 6500 rpm and peak torque at 4000 rpm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with a 4-speed automatic transmission (4AT). 2. The 2.5L naturally aspirated engine in the Mazda 8 produces a maximum power of 120kW and a maximum torque of 226Nm, with peak power at 6000 rpm and peak torque at 4000 rpm. This engine also employs multi-point fuel injection technology and an aluminum alloy cylinder head and block. It is matched with a 5-speed automatic transmission (5AT).

3

1

Share

What brand of tires come standard on the Ford Focus?

Depending on the model configuration and manufacturing batch, the Focus is equipped with tires from different brands, such as well-known brands like Goodyear, Michelin, and Continental. Below are some precautions for tire usage: 1. Enhance awareness of tire safety by regularly inspecting tires, especially before highway driving. Conduct thorough checks, including not only tire pressure but also observing for sidewall cracks and tread wear. Address any potential hazards promptly. 2. Periodically correct wheel balance. Excessive wheel imbalance can cause high-frequency vibrations at high speeds, leading to uneven tire wear and compromising driving safety. After tire repairs, dynamic balance testing and adjustment should be performed, with the single-side dynamic balance value not exceeding 40 grams. 3. Rotate tires regularly. To ensure even wear across all tires on the vehicle, perform tire rotation every 5,000 kilometers and a four-wheel alignment every 5,000 to 10,000 kilometers to prevent abnormal excessive wear. Do not install tires of different models or with significant wear differences on the same axle.

10

5

Share

How many days does it take to process the application for Subject 2 driving test?

After submitting the application for Subject 2 driving test, you will generally receive the result within 5 working days. Here are some relevant details: 1. Test items: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination. For C1 and C2 license tests, it includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. 2. Canceling the application: The application for Subject 2 can be canceled. The cancellation must be done before the vehicle management office sends you the SMS notification, i.e., during the processing of the application. It usually takes within 24 hours to complete the cancellation.

20

2

Share

What is the fuel tank capacity of the Chery Tiggo 3?

How to Set Automatic Door Lock for Nissan Classic Sylphy?

What Type of Engine Oil Does the Teana Car Use?

How to reset the tire pressure light on a Golf?

Is the Mazda 8 imported?

What brand of tires come standard on the Ford Focus?

How many days does it take to process the application for Subject 2 driving test?

What are the differences between the Nissan Patrol Y61 and Y62?

Is Lexus an Imported Car?

How Much Horsepower Does the Prado 4000 Have?

How to Solve the Sunroof Rattle in the Eighth-Generation Camry?