What is the fuel tank capacity of the Changan Yuexiang V3?

2 Answers
OCooper
07/24/25 10:52am
The fuel tank capacity of the Changan Yuexiang V3 is 36 liters. Below is an introduction to related content about Changan vehicles: 1. Exterior: The design adopts a stable and tough style, which aligns with public aesthetics. The conventional design is easily accepted by the public. Changan Oushang caters to consumer tastes in product design and follows a high cost-performance route in detailed design. 2. Body dimensions: The length, width, and height are 4705mm, 1860mm, and 1720mm respectively, with a wheelbase of 2780mm. 3. Interior: The vehicle is equipped with a 7-inch LCD instrument panel and a 10.25-inch central LCD screen, featuring the OnStyle 2.0 intelligent connectivity system that integrates mainstream functions such as internet connectivity, navigation, and music, along with a 360-degree panoramic imaging system. 4. Powertrain: It is powered by a 1.5TGDI engine, paired with a 6-speed manual or a 7-speed dual-clutch transmission.
Was this review help?
2
0
Share
Kira
08/11/25 5:54am
I've been driving the Changan Alsvin V3 for several years, and its 40-liter fuel tank is very practical for daily commuting. For someone like me who commutes in the city, I only need to refuel once a week. Combined with an average fuel consumption of about 8 liters per 100 kilometers, the range can reach around 500 kilometers. I prefer going to the gas station in the morning when there are fewer people and shorter queues, which helps save some spare change. Additionally, the fuel tank size is just right—it doesn’t take up too much trunk space, making it convenient to store small items. Overall, the design is worry-free, so I don’t have to constantly think about refueling. Over time, it has also helped me develop good driving habits, such as avoiding sudden acceleration to reduce fuel consumption.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

How to adjust the height of the Audi Q5L steering wheel?

Be sure to adjust it when the car is parked (preferably turned off). The steering wheel adjustment lock is located directly below the steering wheel, with a switch that somewhat resembles a handle. After adjustment, push it down to lock. The top edge of the steering wheel should be roughly at the same height as the driver's shoulders. Of course, you can also achieve this by adjusting the seat height. The adjustment of both the steering wheel and the seat should ensure the driver's comfort and convenience while driving.
9
2
Share

Where is the vehicle identification plate located on the new Lavida?

The vehicle identification plate of the new Lavida is located on the inner wall of the engine compartment. More information about the vehicle identification plate is as follows: 1. The vehicle identification plate is a label that indicates the basic characteristics of the vehicle, including the manufacturer, model, engine power, total weight, load capacity or passenger capacity, factory serial number, production date, and manufacturer's name. 2. The production date of the vehicle can be determined by checking the vehicle identification plate, which will display the production date in the driver's compartment. 3. The vehicle must be equipped with a vehicle identification plate, placed in an easily visible location at the front of the vehicle. For buses, the plate is placed above the front passenger door inside the vehicle.
20
0
Share

How to Fasten the Third-Row Seat Belt in a GL8?

Generally, pull the seat belt buckle diagonally from the upper left to the lower right and insert it into the socket beside the seat to complete the process. Generally, pull the seat belt buckle diagonally from the upper right to the lower left and insert it into the socket beside the seat. Simply pull the belt out from one side of your body, pass it over your thighs, and insert it into the other side. The middle seat belt in the rear row is located at the rear roof, where you can see two different types of buckles. There are also two different types of sockets in the middle position, one on the left and one on the right.
14
2
Share

What is the installation method for the Jetta rearview mirror?

Adjust the angle of the rearview mirror to the lowest side using the adjustment button inside the driver's compartment. Insert a plastic pry bar into the rearview mirror once. Apply slight force to pry off the rearview mirror. After removing the mirror, use the pry bar to open the plastic cover under the rearview mirror, unscrew the screws, and then the entire rearview mirror can be removed to facilitate wiring during equipment installation. Align the new mirror to the position, press firmly until the mirror snaps into place, and adjust the mirror angle to ensure correct installation.
14
3
Share

Where is the cabin air filter located in the 2018 Malibu?

The cabin air filter in the 2018 Malibu is located behind the glove compartment on the passenger side. Additional information about the Malibu is as follows: 1. The Malibu features Chevrolet's new family-style front fascia design, combining a U-shaped grille with a honeycomb front grille. The headlight design somewhat resembles the current Buick Excelle GT style, giving an overall impression of elegance and stability. The rear taillights incorporate LED design, drawing inspiration from the Camaro with square-shaped taillights and robust dual exhaust pipes that exude a strong American muscular feel. 2. The Malibu's dimensions are 4859mm in length, 1854mm in width, and 1466mm in height, with a wheelbase of 2737mm.
2
2
Share

How to Determine if a Hydraulic Oil Pump is Damaged?

If the bearing in the hydraulic oil pump is damaged, the method to determine this is to check whether the shaft is shaking. If the hydraulic oil pump is damaged due to rust in the inner liner, the only way to determine this is to manually clean the liner yourself. If the oil quality is poor or does not meet standards, this is relatively easy to determine. If the oil quality is insufficient, its pressure value will not meet the requirements. If the core shaft is broken, the efficiency of the hydraulic oil pump will generally be greatly reduced, and its operating speed will become relatively slow when running.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.