What is the fuel tank capacity of the Changan Yuexiang?

2 Answers
Trenton
08/30/25 7:36am
Changan Yuexiang has a fuel tank capacity of 40 liters. Here is some relevant information about fuel tank capacity: How to check a car's fuel tank capacity: You can check through the owner's manual, which is like a universal guide containing detailed information about the vehicle, from maintenance schedules to fuel tank capacity. Owners can use this capacity as a reference when refueling, and it's best not to exceed the safe capacity. Fuel tank capacity measurement unit:
Was this review help?
10
4
Share
AndrewDella
09/12/25 4:33am
I remember when driving the older Changan Yuexiang, the fuel tank was about 40 liters, and when full, it could run over 500 kilometers, which was more than enough for long trips. For daily city driving, refueling once a week was sufficient and not too troublesome. However, the current version might have a slightly smaller tank, so it's advisable to check the manual for confirmation, as there could be differences between different model years. When choosing a car, don't just focus on the fuel tank size; consider fuel consumption and actual needs. This car is lightweight and quite hassle-free for daily driving, but remember not to wait until the tank is empty to refuel, as it can damage the fuel pump.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

Is the Kia Pegas 4AT equipped with an Aisin transmission?

The Kia Pegas 4AT is equipped with an Aisin transmission. Founded in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions, holding the top global market share in this field. The Kia Pegas 4AT utilizes an automatic transmission, which is a gear-shifting device that automatically changes gears based on vehicle speed and engine RPM, as opposed to manual transmissions. When using the Kia Pegas 4AT transmission daily, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged failure to change the fluid can damage internal components such as bearings and the transmission housing. Avoid coasting in neutral for long durations. While some experienced drivers may coast in neutral with manual transmissions, doing so in an automatic transmission can cause overheating and create a jolt when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers shift into the opposite gear while still moving to showcase "smooth" operation, but this severely damages transmission gears and may lead to grinding or other malfunctions over time. Avoid frequently climbing steep slopes in Drive (D). Automatic transmissions may overheat under heavy load or upshift prematurely, causing a loss of power. Use manual mode to lock in lower gears or sport mode to protect the transmission. Do not tow the vehicle over long distances. If the automatic transmission vehicle breaks down, use a flatbed tow truck with the transmission in Neutral (N). Never tow it directly with a rope or other methods that involve dragging the vehicle.
11
2
Share

How Often Should the Front Windshield Film of a Car Be Replaced?

Car front windshield film should be replaced every three years. Benefits of applying film: 1. Heat Insulation: When your car is exposed to the scorching sun, the interior temperature can often become unbearable. Most of the heat inside the car comes through the glass that hasn't been tinted. Constantly running the air conditioning leads to expensive fuel costs and wears out the AC system. Applying high-quality solar film can quickly cool down the car interior and effectively insulate heat. Modern solar films can block over 50% of the total solar heat. 2. Safety: This is a crucial safety feature. High-quality explosion-proof film uses a special polyester film as the base material, which has strong toughness and is paired with a special pressure-sensitive adhesive. In case of an accidental collision, the film holds the shattered glass in place, preventing it from flying and causing injuries. Glass is inherently fragile, which is extremely dangerous during high-speed driving. A car with high-quality film will keep glass fragments firmly in place if the glass breaks, avoiding secondary injuries to passengers. 3. Anti-Theft: Thieves with tools can break the glass and enter the car within five seconds to steal valuables. Explosion-proof film can extend the time it takes for criminals to break the window from a few seconds to nearly a minute. According to police statistics, if criminals can't succeed within ten seconds, they will usually give up and look for another target. 4. UV Protection: Many urban dwellers spend several hours in their cars daily. Without proper film, prolonged exposure to UV rays can severely damage the skin, causing dryness, accelerating aging, and even leading to acute dermatitis (sunburn). UV rays are present year-round. Additionally, UV rays are the main cause of fading and damage to car interiors, leather, and fabrics. It is recommended, especially for female car owners, to choose high-quality film that blocks up to 99% of UV rays, provided it is applied at an officially authorized shop to ensure authenticity. 5. Anti-Glare: Many car owners have experienced the discomfort of glaring lights from oncoming vehicles at night, especially during rainy nights, which can sometimes lead to accidents. Solar film's anti-glare feature effectively reduces this discomfort, improving driving visibility, reducing fatigue, and enhancing safety. 6. Energy Efficiency and Environmental Benefits: With rising fuel prices and increasing CO2 emissions and air pollution, energy efficiency and environmental protection have become priorities. High-quality solar films improve air quality, reduce AC load, enhance fuel efficiency, and ease engine strain. Simply turn on the AC until the interior reaches a comfortable temperature, then turn it off—high-quality solar film keeps the interior temperature stable and saves fuel costs. 7. Privacy: The film allows clear visibility from inside the car while preventing outsiders from seeing in, adding a layer of privacy and exclusivity to your vehicle.
6
5
Share

What Causes the ABS Light to Illuminate After Changing a Spare Tire?

There are various states in which the ABS light may illuminate, with different causes and solutions for each state, as detailed below: State 1: The ABS warning light remains constantly illuminated (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections between system wiring or poor contact in ABS relays can cause signal issues, leading to system failure. Solution: Check all wiring connections and reconnect any loose parts. State 2: The ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As engine speed increases, voltage rises, and the ABS light turns off. This can also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relays or poor power contacts). State 3: The ABS warning light remains illuminated after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body, faulty wiring connections in the ABS hydraulic valve body, or ABS control unit malfunction. Solution: Loosen and retighten the hydraulic valve body's grounding screw, cleaning the contact surface if necessary. Check for enlarged gaps in connectors and replace the ABS or ABS/ASR control unit if needed. State 4: The ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS control unit detects a significant discrepancy between rear and front wheel speed signals. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's specified tire and wheel rim sizes, often listed on the fuel tank cap label. State 5: The ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and manually push the brake switch linkage down completely, then release the pedal to reset its position. Replace the brake light switch if necessary. If the ABS warning light is illuminated, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the anti-lock braking system, which can cause wheels to lock during emergency braking, leading to loss of vehicle control and skidding. This poses significant safety risks as the driver may be unable to decelerate or adjust the vehicle's trajectory.
8
4
Share

What are the reasons why the BYD Qin cannot be charged?

The reasons why the BYD Qin cannot be charged are: the charger is damaged, the charging circuit is faulty, or the battery life has expired. If the issue is with the charger or the battery, they can be directly replaced. Taking the 2020 BYD Qin as an example, it belongs to the compact car category, with body dimensions of: length 4675mm, width 1770mm, height 1500mm, and a wheelbase of 2670mm. The 2020 BYD Qin features a front MacPherson independent suspension and a rear torsion beam non-independent suspension. It is equipped with a permanent magnet motor, delivering a maximum power of 100kW and a maximum torque of 180Nm, paired with a 1-speed fixed gear ratio transmission.
4
1
Share

How to adjust the clock on BYD F3?

The method to adjust the clock on BYD F3 is: 1. Press and hold the CLOCK button on the CD player until the screen flashes; 2. Press H to adjust hours and M to adjust minutes, then lightly press CLOCK to lock. Taking the 2020 BYD F3 as an example, it belongs to the compact car category with body dimensions of: length 4533mm, width 1705mm, height 1490mm, wheelbase 2600mm, and fuel tank capacity 50L. The 2020 BYD F3 features MacPherson strut front suspension and torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine producing maximum power of 109PS (80kW) and maximum torque of 148Nm, mated to a 5-speed manual transmission.
6
4
Share

What Impact Does Idling with Air Conditioning Have on the Engine?

Idling with air conditioning can cause certain wear and tear on the engine, potentially shortening the maintenance cycle. Below is an introduction related to the engine: 1. Introduction: An engine is a machine capable of converting non-mechanical energy into mechanical energy. 2. Classification: Includes internal combustion engines (reciprocating piston engines), external combustion engines (such as Stirling engines, steam engines, etc.), jet engines, electric motors, and more. 3. External Combustion Engine: An external combustion engine means the fuel burns outside the engine. 4. Internal Combustion Engine: An internal combustion engine, or reciprocating piston engine, differs most from an external combustion engine in that the fuel burns inside it. There are many types of internal combustion engines, with common gasoline and diesel engines being typical examples.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.