What is the fuel tank capacity of the Changan Ono?

1 Answers
HarrisonDella
07/29/25 9:40am
The fuel tank capacity of the Changan Ono is 42 liters, as officially announced. Owners who have purchased the Changan Ono can also check this information on the vehicle's configuration sheet. The Changan Ono uses 92-octane fuel, with a fuel consumption of 8.44L per 100 kilometers. A full tank can cover a distance of approximately 498km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the nominal tank capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, leaving some space between the safe fill level and the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening, the actual refueling amount may exceed the nominal tank capacity.
Was this review help?
12
3
Share
More Forum Discussions

Is the BMW 3 Series GT imported?

The BMW 3 Series GT is imported. The 2019 BMW 3 Series GT has a body size of 4824mm in length, 1828mm in width, and 1518mm in height, with a wheelbase of 2920mm. The 2019 BMW 3 Series GT is available in six exterior colors: Sapphire Black, Mineral Grey, Estoril Blue, Glacier Silver, Mineral White, and Alpine White. The front and rear suspensions of the 2019 BMW 3 Series GT are MacPherson strut independent suspension and multi-link independent suspension, respectively. The 2019 BMW 3 Series GT offers two types of drive systems: rear-wheel drive and all-wheel drive, with the all-wheel drive being permanent all-wheel drive.
13
1
Share

How to Turn on the Fog Lights on the Tiggo 8?

Tiggo 8 fog light activation method: Locate the fog light symbol on the vehicle's light control lever and rotate the control ring to align the front fog light symbol with the activation point. At this time, the front fog light symbol will be displayed on the instrument panel, indicating that the front fog lights are on. Rotate the control ring again to align the rear fog light symbol with the activation point, and the rear fog light symbol will appear on the instrument panel, indicating that the rear fog lights are on. The Chery Tiggo 8 is positioned as a mid-size SUV, with future positioning as a flagship SUV. The vehicle's dimensions are 4700mm in length, 1860mm in width, 1746mm in height, and a wheelbase of 2710mm. In terms of power, the vehicle is equipped with two engines: a 1.5-liter turbocharged engine and a 1.6-liter turbocharged engine.
4
0
Share

What Causes Body Shaking During High-Speed Driving?

Here are the reasons for body shaking during high-speed driving: 1. Misalignment of front wheel positioning angles, excessive toe-in. 2. Low front tire pressure or imbalance caused by repairs or other reasons. 3. Deformation of front wheel rims or incorrect number of tire bolts. 4. Loose installation of transmission system components, bent drive shaft, power imbalance, or deformation of the front axle. 5. Failure of shock absorbers or inconsistent stiffness of front leaf springs. If vibration and steering wheel shaking occur at higher speeds, you can first lift the drive axle, place safety blocks in front of the wheels, start the engine, and gradually shift into higher gears to reach the final test vibration speed of the drive wheels. If both the body and steering wheel shake at this point, it indicates vibration caused by the transmission system.
14
2
Share

Is an On-Site Inspection Mandatory for Six-Year-Old Vehicles?

Vehicles eligible for the six-year exemption from inspection must undergo an on-site inspection in their sixth year, strictly following the annual inspection procedures. The annual inspection compliance label will only be issued upon passing the inspection. Below are relevant details: 1. Eligible vehicles exempt from on-site inspection for six years will skip the physical vehicle inspection during this period. However, owners must still apply for the annual inspection compliance label (the one affixed to the windshield) every two years. 2. Required documents for on-site inspection: Original vehicle license (including both main and supplementary copies), valid compulsory traffic insurance policy (duplicate copy), and if the insurance policy does not include the vehicle and vessel tax, the original tax invoice must be provided. Additionally, the owner's original ID card is required for the annual inspection. It is important to note that all prior traffic violations must be settled before the inspection; otherwise, the vehicle will not be eligible for the annual inspection.
12
3
Share

What is the reason for stalling easily with hill start assist?

The reason for stalling easily with hill start assist is lifting the clutch too quickly, failing to maintain the semi-engaged position, which causes manual transmission vehicles to stall when starting on a slope. Hill start assist refers to the intervention through software and hardware to prevent the vehicle from rolling back or stalling when in a hill start condition. Extended relevant information is as follows: 1. Before the vehicle gains sufficient starting power, it will automatically assist the driver in braking. The braking method uses solenoid valves in the ABS pump to control the brake fluid circuit to prevent reverse slipping. 2. Starting a manual car on a half-slope is one of the challenging aspects of driving technique. It requires precise coordination between the throttle and clutch, hence practice on slopes is essential.
8
3
Share

Can I Change Driving Schools After Registration?

It is possible to change driving schools after registration. The procedures for transferring between driving schools are as follows: The student needs to obtain a transfer certificate from the original driving school. Retrieve your personal file from the vehicle management office or the driving school. Finally, report to the new driving school with the file and the transfer certificate. Procedures for changing the location of the driving test: Applicants only need to present their resident ID card (for Hong Kong, Macao, and Taiwan residents, present the residence permit) directly to the vehicle management office in their current place of residence to apply for a change of test location. After the change is processed, applicants can directly schedule the remaining subjects for examination at their current place of residence, with previously passed subject scores remaining valid. After passing all subjects, the driver's license can be obtained directly at the current test location. Note: Students who withdraw after registration without taking the medical examination or who fail the medical examination will have service fees deducted. Students who pass the medical examination and have obtained driving school enrollment but withdraw before applying for the subject one examination will have file setup and service fees deducted. Students who request a refund after passing the optional subject examination but before the road test will not receive a tuition refund.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.