What is the fuel tank capacity of the Changan Eado V7?

2 Answers
VanLeila
07/28/25 5:00pm
The fuel tank capacity of the Eado V7-2016 1.6L Manual Leshang Model (China V) is 45L. It is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission (MT). The drivetrain is front-engine, front-wheel drive. The front suspension type is MacPherson independent suspension, and the rear suspension type is torsion beam non-independent suspension. Among vehicles in the same class, the Beijing U5-2020 1.5L Manual Luxury Model (China VI) has a fuel tank capacity of 48L. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety level. There is additional space from the safety level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity. To check the remaining fuel level, the owner can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is near E, it indicates low fuel, and when it is close to F, it means the fuel level is sufficient.
Was this review help?
3
5
Share
Paige
08/11/25 11:32pm
I am the owner of a Changan Eado V7 and have been driving it for over three years. I know very well that its fuel tank has a capacity of 52 liters. Since I commute to work every day, with a one-way distance of 40 kilometers, a full tank can easily last me the whole week, saving me the hassle of frequent refueling. The average fuel consumption is around 7L/100km, and a full tank can cover over 700 kilometers, allowing me to take my family on weekend trips to the suburbs. I recommend not waiting until the fuel gauge is nearly empty before refueling—keeping it above a quarter tank helps protect the fuel pump. With the current rise in fuel prices, filling up the 52-liter tank costs over 300 yuan, but it’s still better than making frequent trips to the gas station, especially during traffic jams when it’s quite convenient. I advise other owners to regularly check the fuel tank cap’s seal to prevent leaks or contaminants from affecting performance.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

Does changing license plates under one's own name count as a transfer of ownership?

Changing license plates under one's own name does not count as a transfer of ownership. Only when the name on the vehicle registration certificate is changed to the new owner does it constitute a transfer of ownership. Below are the specific details regarding motor vehicle registration: 1. Legal Basis: Article 18 states that when the ownership of a registered motor vehicle is transferred, the current owner must apply for a transfer of registration at the local vehicle management office within 30 days from the date of delivery. Before applying for the transfer of registration, the current owner must resolve all traffic violations and accidents related to the vehicle. 2. Procedures: To apply for a transfer of registration, the current owner must fill out an application form, present the vehicle for inspection, and submit the current owner's identity proof, proof of ownership transfer, the vehicle registration certificate, and the vehicle registration card.
8
0
Share

Is it acceptable to buy a car with a replaced radiator support frame?

If the radiator support frame is connected to the vehicle body frame with screws and can be detached, then replacing the radiator support frame has minimal impact. However, if the radiator support frame is integrated with the vehicle body frame, replacing it may have some consequences. Additional information: 1. Radiator introduction: The radiator support frame is a common trouble spot in the front of a vehicle and is also the most frequently impacted area in collisions. There are three types of radiator support frame materials on the market: plastic, iron, or alloy. Structurally, they can be divided into one-piece and split types. The one-piece type is the most common form on the market, and in some regions, the radiator support frame is also referred to as a "dragon gate frame." The split type is generally divided into three sections, connected via bolts or welding points. 2. Water-cooled engines: Cars use water-cooled engines, which rely on the continuous circulation of coolant to dissipate heat. Water-cooled engines have a radiator at the front of the vehicle, which is mounted on the radiator support frame. Most vehicles have detachable radiator support frames, while some vehicles have radiator support frames that are integrated with the vehicle body frame.
20
1
Share

Car Maintenance: By Time or Mileage?

Generally, car manufacturers recommend performing maintenance based on whichever comes first. Additional information: Functions of engine oil: 1. Lubrication and friction reduction: There is inevitable friction between parts, and engine oil helps reduce this friction. 2. Cooling: Engine oil carries heat back to the oil tank and then dissipates it into the air, assisting the radiator in cooling the engine. 3. Cleaning: Over time, engines accumulate impurities. High-quality engine oil can carry away these impurities as it circulates, flushing out contaminants. 4. Sealing and leak prevention: It blocks water and air, enhancing rust and corrosion resistance.
1
3
Share

What is the real fuel consumption of Nissan Teana?

Nissan Teana's combined fuel consumption is 5.9-6.7L/100km. There are currently 6 models of Nissan Teana on sale: the Fashion Edition, Comfort Edition, and Intelligent Navigation Edition, with a fuel consumption of 5.9L/100km. The Intelligent Edition and Intelligent Premium Navigation Edition have a fuel consumption of 6.6L/100km. The Intelligent Ultimate Navigation Edition has a fuel consumption of 6.7L/100km. The above figures are NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The real fuel consumption is higher than this value, ranging from 7.0-9.0L/100km. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle in advance when approaching red lights can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically produce more power, requiring more gasoline for combustion. Heavier vehicles also consume more fuel due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline is less likely to vaporize during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in cold temperatures, the engine's computer may control higher idle speeds to warm up the engine, further increasing fuel consumption.
17
0
Share

What are the classifications of buses?

Buses are classified into 4 categories: micro buses, light buses, medium buses, and large buses. The following is a detailed introduction to bus classifications: 1. Types: Traditional buses can be single-deck or double-deck; articulated or trailer-type. They may have two doors, a single door, or be equipped with a luggage compartment. Most buses are powered by diesel engines, though there are now pure electric models with all-metal bodies. In terms of energy consumption and road space per passenger, public transport vehicles are more economical than private vehicles, which is one of the main reasons many countries prioritize the development of public transport buses. 2. Status: Globally, car manufacturing and popularization are widespread, so the bus manufacturing industry, as the main body of public transport, demonstrates considerable maturity in both design concepts and technology. Europe leads the world in bus technology and research capabilities. China's bus industry holds an important position internationally in terms of design capability and manufacturing level.
13
5
Share

Why does the steering wheel shake when driving fast?

Here are the reasons why the steering wheel shakes when driving fast: 1. It is a manifestation of poor wheel dynamic balance. Go to the after-sales service for a dynamic balance check. 2. Check whether the front and rear shock-absorbing support rubber blocks of the engine and transmission are normal. Go to the after-sales service for inspection and repair. Additional information: 1. Dynamic balance: If the shaking occurs at 80-120 mph and disappears above or below this range, the four-wheel dynamic balance should be checked first. Possible causes include the detachment of tire balance weights, failure to perform dynamic balance after tire repair, or inaccurate measurements by dynamic balance machines in some small roadside shops. 2. Tires and rims: The deformation of tires and rims is usually caused by careless driving habits, such as driving too fast on rough roads, climbing curbs, or passing over speed bumps at high speeds, all of which can lead to this issue.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.