What is the fuel tank capacity of the Camry Hybrid?

2 Answers
VanBennett
07/24/25 12:48pm
The fuel tank capacity of the Camry Hybrid is 49 liters, which is the officially announced data. Owners who have purchased the Camry Hybrid can also check this information on the vehicle's configuration sheet. The Camry Hybrid uses 92-octane gasoline, with a fuel consumption of 4.1L per 100 kilometers. A full tank can cover a distance of 1,195 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow. If the fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
16
4
Share
RicardoFitz
08/11/25 6:54am
I just bought a Camry Hybrid, and after driving it for a few months, I realized the fuel tank is 50 liters, which honestly is smaller than I expected. On a long trip from Guangzhou to Xiamen, covering over 800 kilometers, I didn’t need to refuel midway. The fuel consumption is exceptionally low, averaging just over 4 liters per 100 kilometers, with a range easily exceeding 1,000 kilometers. For my daily city commute, I only need to refuel once a week, making it more convenient and cost-effective compared to gasoline cars. The fuel tank is designed at the rear bottom, which doesn’t affect trunk space, and the hybrid system is well-optimized, even recovering energy during deceleration. I find it especially practical for family trips, reducing the hassle of queuing at gas stations.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

How to Turn on the Fog Lights of a Car?

The fog light switch is located on the light control lever. Find the fog light symbol on the vehicle's light control lever and rotate the control ring to align the front fog light symbol with the activation point to turn on the front fog lights. Rotate the control ring to align the rear fog light symbol with the activation point to turn on the rear fog lights. Note: 1. The front fog lights can be turned on independently, but the rear fog lights can only be turned on together with the front fog lights and cannot be activated alone. 2. When driving at night, turn on the headlights. In poor weather conditions, proper use of fog lights not only helps improve driving visibility but also serves as a warning to other road users.
12
5
Share

Where does a sedan need to be greased?

Sedans do not require grease during maintenance, while large trucks do. The fluids needed for car maintenance include: engine oil, transmission fluid, brake fluid, coolant, differential oil, etc. Some parts of the car also require grease, such as door hinges, hood hinges, and trunk lid hinges. The key to sedan maintenance is replacing wear-prone parts and fluids. Wear-prone parts on a car include belts, spark plugs, batteries, tires, brake pads, brake discs, engine oil filters, fuel filters, air filters, cabin air filters, and fuel filters. For a car, the most crucial fluid is engine oil, which is referred to as the lifeblood of the engine. Without engine oil, the engine cannot operate normally.
13
3
Share

How Many Liters of Transmission Oil Should Be Added to the Baojun 730?

Baojun 730 requires two liters of transmission oil. The process for changing the transmission oil is as follows: lift the vehicle, unscrew the drain plug to drain the oil, wait until the transmission oil is completely drained, then tighten the drain plug, add the transmission oil, and check the dipstick until the oil level reaches the standard mark. Start the vehicle, check the oil level on the dipstick again, and inspect the bottom for any leaks. The Baojun 730 is an MPV produced by SAIC-GM-Wuling. It features a MacPherson strut front suspension and a torsion beam rear suspension. In terms of dimensions, it measures 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. It is powered by a 1.5T turbocharged engine paired with a 6-speed manual transmission.
20
2
Share

How to Replace Brake Pads?

The steps for replacing brake pads are as follows: 1. Park the vehicle on a level surface; 2. Loosen the wheel bolts; 3. Jack up the vehicle; 4. Remove the wheel bolts one by one while the tire is suspended and take off the tire; 5. Remove the brake caliper; 6. Take out the old brake pads and secure the brake hose to prevent brake fluid leakage; 7. Inspect the old brake pads and compare them with the new ones to determine the extent of wear; 8. Install the new brake pads, then reassemble the caliper and caliper bolts; 9. Tighten the wheel to complete the replacement; 10. Press the brake pedal several times. An important step after replacing the brake pads is to press the brake pedal a few times, as there is a gap between the brake caliper and the new brake pads during replacement. If the brake pedal is not pressed, the brake caliper will not reset, and the brakes will not respond.
4
4
Share

How to Replace the Fog Lights on a Prado?

The method for replacing the fog lights on a Prado is as follows: There is a small cover below the fog light. Remove the cover to reveal a cross-head screw inside. Use a long-handled cross-head screwdriver to remove it, and the fog light can then be taken out. After replacing the fog light, reassemble it following the steps in reverse order. The function of fog lights is to improve the visibility of the vehicle in rainy or foggy weather. Since rain and fog can reduce the penetration of light, fog lights must first have strong penetration and high visibility. The Prado is a mid-to-large SUV under FAW Toyota. The front suspension uses a double-wishbone independent suspension, and the rear suspension is a four-link non-independent suspension. In terms of body dimensions, its length, width, and height are 4840mm, 1885mm, and 1890mm respectively, with a wheelbase of 2790mm. It is powered by a 3.5L naturally aspirated engine, matched with a 6-speed automatic transmission.
3
3
Share

Can a C1 License Drive Yellow Plate Vehicles?

Yellow plate vehicles cannot be driven with a C1 license. Yellow plate trucks require a B2 license to operate, while blue plate trucks can be driven with a C1 license. Since the B2 license covers vehicle types permitted by C1, holders of a B2 license can drive both blue and yellow plate trucks. Yellow plates are further categorized into large yellow plates and small yellow plates. Low-speed trucks permitted under the C3 license class use small yellow plates. The advantage of yellow plate trucks lies in their higher loading capacity, but this comes with corresponding trade-offs. Firstly, a B-class license is required to operate them. Secondly, yellow plate trucks are prohibited from entering urban areas and cannot obtain an H permit. Additionally, annual insurance premiums and vehicle usage taxes for yellow plate trucks are higher compared to blue plate trucks.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.