What is the fuel tank capacity of the C260?

1 Answers
Shelby
07/29/25 10:29pm
The latest Mercedes-Benz C260 has a fuel tank capacity of 66L. This is the official data. Owners of the latest Mercedes-Benz C260 can also check this information in the car's configuration sheet. The latest Mercedes-Benz C260 comes in two models with different fuel consumption, but both use 95-octane fuel. The WLTC combined fuel consumption for the Mercedes facelifted C260L Sport model is 6.6L per 100km, and a full tank can cover a distance of 1000km. The WLTC combined fuel consumption for the Mercedes C260L Night Sport model is 6.35L per 100km, and a full tank can cover a distance of 1039km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. Other factors that affect a car's fuel consumption include: Vehicle weight: There is a direct correlation between weight and fuel consumption. A 10% reduction in weight can lead to a corresponding reduction in fuel consumption. Car aerodynamics: A lower drag coefficient results in noticeably lower fuel consumption, while a higher drag coefficient increases fuel consumption proportionally. Low tire pressure: This increases tire friction and adhesion, leading to higher fuel consumption. Driving habits: Aggressive acceleration and frequent braking can significantly increase fuel consumption. Wind direction: Driving with a tailwind reduces fuel consumption, while driving against a headwind increases engine workload and fuel consumption. Road conditions: Driving on flat roads results in lower fuel consumption, while driving on rough or steep roads increases it. Use of additional electronic devices: Using extra equipment like air conditioning while driving increases the rate of fuel consumption.
Was this review help?
16
0
Share
More Forum Discussions

What is the fuel injection method of the New Baojun RC6 engine?

The fuel injection method of the New Baojun RC6 engine is multi-point injection. The New Baojun RC6 is a mid-size car produced by SAIC-GM-Wuling, with body dimensions of 4925mm in length, 1880mm in width, and 1580mm in height, and a wheelbase of 2800mm. In terms of exterior design, the New Baojun RC6 adopts the brand's family-style design language, featuring a hexagonal grille with a starry sky pattern inside and a diamond emblem. The headlights on both sides have a sharp design, with a unique internal arrangement that gives a full and highly recognizable appearance. The lower grille adopts a large-mouth design, providing a good sense of layering, and the blackened treatment creates a strong sporty atmosphere.
12
1
Share

What is the capacity of the X-Trail's radiator?

The radiator capacity of the X-Trail is 1L. The car radiator generally refers to the heat exchanger, which is part of the vehicle's cooling system. The radiator in the engine's water cooling system consists of three parts: the inlet chamber, outlet chamber, main plate, and radiator core. The X-Trail is a model under Dongfeng Nissan, with body dimensions of 4675mm in length, 1820mm in width, and 1722mm in height. In terms of exterior design, the X-Trail features a waistline that runs from the headlights to the taillights, giving it a smooth and refined appearance. The uniform gaps between the body panels and the integrated tailgate trim enhance the seamless connection between the tailgate and rear bumper, combining a sense of strength with elegance.
13
5
Share

What are the consequences of not replacing engine mounts?

Failure to replace engine mounts in a timely manner can lead to increased vehicle vibration, accelerating the wear and tear of internal components. Below are specific details about engine mounts: 1. Vibration Dampening: During engine operation, certain vibrations are generated. The rubber components in engine mounts help eliminate resonance produced by the engine. 2. Pressure Relief Function: Some engine mounts also feature hydraulic pressure relief. If a mount is damaged, the vibrations from the engine can cause the entire vehicle body to vibrate. 3. Impact of Damage: Typically, there are three engine mounts secured to the vehicle frame. If one is damaged and not replaced promptly, it disrupts balance and can accelerate the deterioration of the other two.
16
3
Share

Can a C1 Driver's License Operate a Tractor?

C1 driver's license cannot be used to operate a tractor. Below are the specific details about the C1 driver's license: 1. Permitted Vehicle Types: The C1 driver's license is one of the codes for motor vehicle driver's licenses. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the C1 license permits driving small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special operation vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. Based on these standards, a C1 license does not allow driving vehicles with more than 9 seats. 2. Examination Subjects: Includes four subjects: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving common sense.
14
0
Share

What Causes Steering Wheel Shaking When Braking Above 80?

Steering wheel shaking when braking above 80 is caused by uneven surfaces on the brake discs, and simply replacing the brake discs will resolve the issue. A car's braking system consists of a vacuum booster pump, master brake cylinder, wheel brake cylinder, brake pads, and brake discs. The wheel brake cylinder is commonly referred to as the brake caliper. Upon opening the engine hood, you can see a large black disc located below the windshield on the driver's side—this is the vacuum booster pump. When the brake pedal is pressed, the vacuum booster pump provides assistance, making it easier for the driver to depress the pedal. In front of the vacuum booster pump is the master brake cylinder, and above it is a small oil reservoir used to hold brake fluid.
5
5
Share

How to Reset Tesla Tire Pressure?

Here is the method to reset Tesla tire pressure: 1. Turn the ignition switch to the second gear, and the total mileage and sub-mileage interface will appear on the dashboard; 2. Press the OK button on the left side of the steering wheel and then press the right button to enter the maintenance interface; 3. Press the down button on the steering wheel to enter the tire pressure interface; 4. The dashboard low-pressure run-flat indicator will be enabled, press the OK button on the steering wheel to confirm; 5. The dashboard will prompt whether the tire pressure is normal, press the down button on the steering wheel and then press OK to confirm; 6. Complete the tire pressure reset operation, turn off the ignition and restart, and the tire pressure reset will be successful. Extended content: Tesla belongs to the compact SUV category, with body dimensions of 4750mm in length, 1921mm in width, and 1624mm in height.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.