What is the fuel tank capacity of the c200l?

1 Answers
PaisleyLee
07/28/25 7:13pm
c200l fuel tank capacity is 66 liters. The fuel tank volume varies for different models, and even for the same type of vehicle across different brands, there is no unified standard. The fuel tank volume determines the driving range. For two cars with identical engines, the larger the fuel tank, the farther it can run. The Mercedes-Benz c200l is a car launched by Mercedes-Benz, with dimensions of 4784mm in length, 1810mm in width, and 1457mm in height, and a wheelbase of 2920mm. In terms of configuration, this car is equipped with an active safety system, intelligent lighting system, preventive safety system, passenger safety protection system, rescue tools, front airbags, side airbags on the front doors, etc.
Was this review help?
7
1
Share
More Forum Discussions

Is It Normal for Water to Drip from a Car's Exhaust Pipe?

It is normal for water to drip from a car's exhaust pipe. Relevant information is as follows: 1. Exhaust gases: The car engine draws in air and atomized gasoline, which is then ignited by the spark plug to perform work. After complete combustion, the combustible gases become exhaust gases. The main components of exhaust gases are carbon dioxide and water vapor. 2. When the exhaust temperature is high: The exhaust temperature from a car's exhaust pipe is very high, while the ambient temperature is relatively low. When the water vapor in the exhaust gases encounters the low external temperature, it condenses into small water droplets. 3. When the car has just started: The entire exhaust pipe is in a cold state, and the small water droplets formed by the condensation of water vapor accumulate in the exhaust muffler, forming water accumulation. When the accumulated water reaches a certain level, water can be seen spraying out from the exhaust pipe opening. In fact, this indicates that the engine's combustion is in good condition and operating normally.
14
3
Share

Can a Tire Patched Four Times Be Used on Highways?

Tire patched four times cannot be used on highways. Here are the extended details: 1. Common tire repair methods: There are two main types—external and internal repairs. External repair involves enlarging the puncture hole slightly with an awl and then inserting a glue-coated rubber strip. This method is convenient, time-saving, and inexpensive, but it is not durable and prone to air leakage. It is not recommended. Tires repaired with this method should never be used on highways, especially in summer. High summer temperatures cause severe tire heating and increased pressure, and if the tire is bumped, the rubber strip may pop out, posing a safety hazard. Internal repair involves grinding the punctured area on the tire's inner side, applying glue, attaching a repair patch, and then pressing it firmly with tools until fully bonded. This method offers good results and high stability, and it is recommended for car owners. 2. Tire replacement: Tires are the components that directly contact the road and are crucial for the safety of drivers and passengers. Daily driving must pay attention to road conditions. Minor tire damage can be repaired and the tire can continue to be used, but severe damage requires immediate replacement. Always inspect tires before driving.
11
1
Share

Is it necessary to replace halogen lights with LED lights on a Civic?

It is not necessary to replace halogen lights with LED lights on a Civic. The reasons are as follows: 1. Failing the annual inspection: If the original factory uses halogen lights, replacing them with LED lights will result in failing the annual inspection. 2. Blowing fuses: Modified lighting usually involves adding a voltage regulator and fuses, but due to incompatibility with the original car circuit, fuses often blow. Moreover, the voltage regulator can get extremely hot during operation, and improper installation can easily melt the wiring, causing a short circuit. Additional information about lighting: 1. LED lights: The advantages of LED lights include high brightness, versatile design options, energy efficiency, long lifespan, and compact size; however, their downside is that their penetration power is inferior to halogen lights, and they are technically complex and expensive. 2. Xenon lights: The advantages of xenon lights include low power consumption, high brightness, strong penetration power, and a longer lifespan compared to halogen lights; however, their disadvantages include not reaching maximum brightness immediately upon startup, complex structure, high failure rate and maintenance costs, and a tendency to scatter light.
6
0
Share

What type of engine oil is suitable for the Beijing Hyundai Elantra?

Beijing Hyundai Elantra can use the original manufacturer-recommended 5W30 semi-synthetic or higher-grade engine oil. The '5' indicates the oil's ability to withstand temperatures as low as -30 degrees Celsius; 'W' stands for 'Winter,' and the smaller the number before it, the lower the temperature the oil can adapt to, with better low-temperature fluidity. '30' refers to the kinematic viscosity at 100 degrees Celsius, where a higher number indicates higher viscosity and better high-temperature resistance. The Beijing Hyundai Elantra is a compact car under the Beijing Hyundai brand, with dimensions of 4610mm in length, 1800mm in width, and 1450mm in height, and a wheelbase of 2700mm. In terms of suspension, the front suspension of the Beijing Hyundai Elantra is a MacPherson independent suspension, while the rear suspension is a torsion beam non-independent suspension.
4
1
Share

What are Body-on-Frame and Unibody Structures?

Body-on-Frame Structure: The most distinctive feature of a body-on-frame structure is the presence of an independent frame. The body is elastically mounted on the frame using springs or rubber cushions, while components such as the engine, transmission, and suspension system are all installed on the frame. The primary load-bearing component is the frame, with the body only supporting the weight of passengers and luggage. This structure is mainly used in trucks, buses, off-road vehicles, and some high-end sedans (e.g., Mercedes-Benz S600). Unibody Structure: The most distinctive feature of a unibody structure is the absence of a separate frame. The body is constructed as a rigid framework through welding components such as the floor pan, skeleton, and inner/outer panels. The engine, transmission, and suspension system are all mounted directly on the body, with all structural members participating in load-bearing, hence the name unibody. This structure is primarily used in most sedans, urban SUVs, and some buses.
14
0
Share

What are the differences between Energy XM2 and XM2+?

The differences between Energy XM2 and XM2+ are as follows: 1. Different models: XM2+ is the enhanced version of Energy XM2. 2. Different features: XM2: Not only performs excellently in reducing fuel consumption and exhaust emissions, but also excels in quiet comfort, safety, stability, and high mileage. XM2+: Combines safety, comfort, and environmental protection. Its robust tread structure reduces the likelihood of sudden damage and enhances service life. The improved performance effectively shortens braking distance and reduces the occurrence of collision and abrasion accidents. The small tread design provides a quiet and comfortable driving environment. 3. Different applicable road conditions: XM2: Specially designed for small and medium-sized cars to adapt to Chinese road conditions, the tires are strong, durable, and resilient, suitable for daily complex and variable road conditions, greatly reducing the possibility of sidewall damage. XM2+: Designed for small and medium-sized cars and Chinese road conditions, in addition to maintaining Energy's consistent characteristics, such as a strong and durable tire body and short braking distance, it further enhances Energy's wear resistance, offering ultra-long mileage.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.