What is the fuel tank capacity of the BYD Qin Plus DM-i in liters?

1 Answers
VanNicole
07/29/25 5:41pm
The fuel tank capacity of the BYD Qin PLUS DM-i is 48 liters, as officially announced. Owners who have purchased the BYD Qin PLUS DM-i can also check this information on the vehicle's configuration sheet. The BYD Qin PLUS DM-i uses 92-octane fuel, with a fuel consumption of 3.8L per 100 kilometers. A full tank can cover a distance of approximately 1,263 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. In actual refueling situations, the amount of fuel filled may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill limit, and there is additional space from the safe limit to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
17
5
Share
More Forum Discussions

What are the exterior dimensions of the Envision?

The exterior dimensions of the Envision are 4667mm in length, 1839mm in width, and 1696mm in height, classifying it as a midsize SUV. In terms of powertrain, the Envision is equipped with a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter variant is paired with a 7-speed dual-clutch transmission, while the 2.0-liter variant comes with a 9-speed automatic transmission. Regarding its exterior design, the Envision features a sleek and modern appearance with a dignified front fascia. For its interior configuration, the Envision offers brown genuine leather upholstery, Alcantara brown suede seats, a stone-pattern glossy center console, a leather-wrapped armrest with a flip-top cover, stone-pattern center console trim, an ice-blue-toned central display screen, ambient blue lighting, a nautical-style quartz clock, and a panoramic sunroof, among other features.
17
4
Share

Where is the Great Wall Haval factory located?

Great Wall Haval factory is located in Baoding City, Hebei Province. Haval is a sub-brand under Great Wall Motors, primarily focusing on SUV models. It operates in parallel with the Great Wall brand, utilizing an independent logo and maintaining separate systems for product development, production, and services. The brand encompasses three vehicle series: H series, M series, and F series. Taking the Great Wall Haval H1 as an example, its body dimensions are 3895mm in length, 1729mm in width, and 1621mm in height, with a wheelbase of 2460mm, positioning it as an SUV. In terms of power, the Great Wall Haval H1 is equipped with a 1.5L naturally aspirated engine, model GW4G15, delivering a maximum horsepower of 106ps, maximum power of 78kw, and maximum torque of 138nm.
17
4
Share

How to reset the maintenance reminder on the Roewe RX5 large screen?

The method to reset the maintenance reminder on the Roewe RX5 large screen is: 1. Before resetting, turn off the ignition switch, locate the arrow buttons on the vehicle, and simultaneously press both arrow buttons to turn on the ignition switch; 2. Press and hold the buttons for more than 3 seconds, then release both arrow buttons. A reset menu will appear on the screen displaying "Reset?" information; 3. Press and hold the SET button for more than 3 seconds, then release, and press the MODE button to complete the process. Taking the 2021 Roewe RX5 PLUS 300TGI automatic Ali Guochao Luxury Ronglin version as an example: its dimensions are 4571mm in length, 1855mm in width, and 1719mm in height, with a wheelbase of 2708mm. The vehicle type is a 5-door, 5-seat SUV, with a top speed of 190 km/h and a fuel tank capacity of 55L.
9
1
Share

Is it necessary to press the brake when shifting gears in an automatic transmission?

Shifting gears in an automatic transmission does not require pressing the brake; you can directly change the gear. However, there are some precautions to note as follows: Pressing the brake when starting: When starting in P (Park) gear, you must press the brake. At this time, because the car has just started and the driver has not yet entered a good driving state, it is essential to press the brake while shifting gears to prevent the vehicle from losing control. Pressing the brake in neutral gear: When in neutral gear, you must press the brake. Pressing the brake when shifting from neutral to other gears: When shifting from neutral gear back to other gears, you must press the brake. Otherwise, it may damage the transmission gears, causing gear grinding. When pressing the brake, avoid slamming it all the way down, as this can cause severe wear on the brake pads, affect the braking system, and eventually lead to brake failure.
2
1
Share

What to Do If You're Caught Driving Without a Driver's License?

First, maintain a good attitude and clarify that you are not driving without a license but merely forgot to carry your motor vehicle driver's license. Quickly notify your family or friends to bring your driver's license for verification by the traffic police. If the traffic police decide to impose a penalty, accept it with humility. Relevant information about the driver's license is as follows: Introduction: The Motor Vehicle Driver's License of the People's Republic of China, commonly referred to as a driver's license or 'driver's permit,' is a mandatory certification for motor vehicle drivers, established in accordance with the laws of the People's Republic of China. Examination Content: The test subjects include three categories: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
12
0
Share

Are SUVs Fuel-Consuming?

SUVs are relatively fuel-consuming due to their body weight and structural characteristics, typically consuming more fuel than sedans of the same displacement. The following are factors affecting fuel consumption: Vehicle-related factors: Fuel consumption is related to displacement. Generally, the larger the displacement, the higher the fuel consumption. Additionally, the thermal efficiency of the engine and the vehicle's aerodynamic design also affect fuel consumption. External environmental factors: Road conditions and the external environment significantly impact fuel consumption. Generally, flat roads consume less fuel than hilly roads, straight roads consume less than winding roads, and smooth traffic consumes less than congested traffic. In winter, lower temperatures prevent gasoline from reaching the optimal combustion temperature, leading to incomplete combustion and some fuel wastage.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.