What is the fuel tank capacity of the BYD G3?

2 Answers
LeonardoDella
09/08/25 7:37am
The fuel tank capacity of the BYD G3 is 50 liters. The BYD G3 is another high-end model following the F6. It will be available in four variants with two engine displacements: 1.5L and 1.8L, namely the Comfort GL-i, Luxury GLX-i, Premium GS-i, and Flagship GLX-iNAVI. Relevant information about automotive fuel tanks is as follows: Introduction: The automotive fuel tank is the full name for a car's fuel container. Currently, with the development of the automotive industry and the revitalization of the domestic car manufacturing sector, the demand for automotive fuel tanks among major automobile manufacturers has shown a significant upward trend. Design Principle: Utilizing the heat generated by the engine during operation, an additional thermal circulation system is installed between the engine, fuel tank, and radiator. The original single fuel tank design is transformed into a combined fuel tank consisting of a main tank and an auxiliary tank.
Was this review help?
12
2
Share
SanAmir
09/20/25 6:05am
I've been driving my BYD G3 for several years now, and its 50-liter fuel tank capacity is quite standard for a compact car. A full tank gives me a range of about 600 kilometers, making it worry-free and practical to drive. I remember when I first started using it, I used to calculate the fuel consumption frequently, averaging around 7 liters per 100 kilometers, which is suitable for city commuting and short trips. A larger fuel tank has many benefits, such as only needing to refuel once a week, saving both money and time. I recommend regularly checking the fuel tank cap's seal to avoid fuel vapor leakage, which can affect efficiency. For long-distance driving, a 50-liter tank means fewer stops at gas stations, making the journey safer and more comfortable. Overall, this design is very reasonable and reflects BYD's practical philosophy, helping me enjoy the convenience of daily travel.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

Can a spark plug with a heat value of 6 be replaced with one of 7?

A spark plug with a heat value of 6 cannot be replaced with one of 7. The heat value of a spark plug is specific, and a higher heat value indicates a colder type. If a vehicle is designed for a heat value of 6 but the owner uses a heat value of 7, the spark plug may accumulate carbon deposits when the vehicle operates at low speeds. How spark plugs work: The ground electrode of the spark plug is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily isolates the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode, generating a spark to ignite the air-fuel mixture in the cylinder. If a spark plug is damaged, it can directly cause issues such as electrical leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most importantly, difficulty in ignition, affecting the normal operation of the vehicle. Severe erosion of the spark plug, such as scarring at the top, damage, or melted and eroded electrodes, indicates that the spark plug is damaged and should be replaced.
10
5
Share

Can I drive on the highway with a tire pressure of 200 kPa?

A tire pressure of 200 kPa is not suitable for highway driving. The standard tire pressure range is 2.4-2.5 bar; reinforced tires require 2.8-2.9 bar; the maximum pressure should not exceed 3.5 bar. Hazards of low tire pressure: Increased friction coefficient with the road surface leads to higher fuel consumption; causes heavy steering and potential drifting, which are unfavorable for driving safety; increases movement in various parts of the tire, leading to abnormal heat due to excessive rolling; reduces the functionality of the cord and rubber, causing delamination or cord breakage, and excessive friction with the rim, resulting in damage to the tire bead area and abnormal wear. Hazards of high tire pressure: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and drifting, reducing driving comfort; accelerates localized wear of the tread pattern in the center of the tire, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components.
3
1
Share

How to Adjust the Headlight Height of the Tayron?

The method to adjust the headlight height of the Tayron is as follows: Press the small lever near the front wheel, and the two sensors at the front and rear will detect the height of the vehicle body. Adjust the height of the headlights by raising the front sensor or lowering the rear sensor. More details are provided below: 1. The body dimensions of the Tayron are: length 4453mm, width 1841mm, height 1632mm, with a wheelbase of 2680mm. 2. The Tayron is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
14
5
Share

Will highways be closed during rain?

Under normal rainy conditions, highways are not closed unless extreme weather such as heavy rain or dense fog prompts temporary closure measures. Below are some precautions for driving in the rain: 1. Reduce speed and drive cautiously: Regardless of road width or surface condition, slow down in the rain and always pay attention to the distance between vehicles ahead and behind, preparing mentally for various emergency measures. Visibility is low in rainy weather, and the field of vision is poor. The braking distance and other emergency performance of vehicles are also reduced, so it's essential to slow down in advance, leaving enough time and space to handle situations and ensure safety. 2. Maintain a safe distance: Rainy conditions obstruct visibility, so it's crucial to keep a safe distance from other vehicles, constantly observing the distance between cars ahead and behind, and increasing the safety margin. Especially stay away from large vehicles, as they can block your view, and puddles that large vehicles can pass through might not be navigable for smaller cars. Additionally, large vehicles can splash water, disrupting smaller vehicles' driving. 3. Use fog lights in the rain: Make full use of fog lights to enhance driving safety in the rain. Turn on hazard warning lights when necessary to ensure that vehicles behind are always aware of your movements ahead.
12
4
Share

How to Change the Transmission Fluid for GAC Trumpchi GM8?

The method for changing the transmission fluid for GAC Trumpchi GM8 is as follows: 1. The principle is the same as changing the engine oil. Loosen the bolt of the oil pan and let the transmission fluid drain out by gravity. This method is the simplest, but it cannot completely drain the transmission fluid, as some fluid remains in dead corners such as recesses and uneven areas due to the mechanical structure. 2. Add new transmission fluid into the circulation machine, then connect the circulation machine to the transmission fluid circuit interface. Under hydraulic pressure, the new fluid will push out the old fluid. This method cleans the fluid circuit more thoroughly. The more new transmission fluid used, the cleaner the system will be. A single circulation machine fluid change requires approximately 10-13 liters of transmission fluid. The process takes about 40-80 minutes.
12
5
Share

Why Doesn't the Fuel Gauge Show Full After Refueling?

After refueling, the fuel gauge does not show full because the fuel tank is divided into two parts: a main tank and a secondary tank. Each part has its own fuel level sensor, and the two sensors are connected in series. The fuel gauge displays the average value of the remaining fuel in both parts. Here are some tips related to car refueling: 1. Do not wait until the warning light comes on to refuel: Since the fuel pump is located inside the fuel tank and relies on gasoline for cooling and lubrication, insufficient fuel can hinder the pump's normal operation and reduce its lifespan. 2. It is not recommended to fill the tank completely: Gasoline expands when heated and evaporates into gasoline vapor under high summer temperatures, requiring space to accommodate it. If the tank is filled to the brim without any space, gasoline vapor or even liquid gasoline may enter the carbon canister for storage, which is not only wasteful but also pollutes the environment. 3. Indicator deviation: After routine battery replacement, fuel filter changes, or even after parking overnight, you may notice that the fuel gauge needle is lower than the previously displayed position when starting the vehicle again, leading you to think it's a malfunction. When the temperature drops and the fuel tank is opened, pressure is released, causing the fuel level to drop, so such display deviations are normal. However, the deviation generally does not exceed the width of one needle.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.