What is the fuel tank capacity of the Buick GL6 in liters?

How to Replace the Cruze Fuel Filter?

The method for replacing the Cruze fuel filter: The fuel filter is located under the chassis of the car. You need to use a lift to raise the vehicle, then locate a cylindrical filter connected by two or three pipes along the fuel tank and fuel lines. After removing the old filter, simply insert the new one. The Cruze is a compact sedan launched by Chevrolet, with dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, and a wheelbase of 2700mm. The Cruze also offers both sedan and hatchback versions. The new-generation model features a 17-inch five-spoke aluminum alloy wheel, further enhancing the sporty feel of the car.

13

1

Share

Why Does Brake Fluid Increase?

The reasons for the increase in brake fluid: When braking too frequently, the temperature of the brake fluid rises, and due to the principle of thermal expansion and contraction, the fluid level will rise. However, if the brake fluid increases excessively, it generally indicates that water has entered the brake fluid. In this case, the brake fluid should be replaced immediately to prevent safety hazards during vehicle use. Brake fluid should be replaced approximately every 40,000 to 50,000 kilometers of driving. Insufficient brake fluid can lead to softer braking, longer braking distances, or even brake failure, significantly increasing safety risks. When replacing brake fluid, it is important to use original equipment manufacturer (OEM) brake fluid to ensure quality.

19

2

Share

What engine does the Beijing 80 off-road vehicle have?

The Beijing 80 off-road vehicle is equipped with a 2.0T, 2.3T gasoline engine, and a 2.8TDI diesel engine. The model of the 2.0T engine is B201R, with a maximum power of 150kw, paired with a 6-speed manual transmission and a 6-speed automatic transmission. The Beijing 80 off-road vehicle is a mid-to-large-sized hardcore off-road vehicle under Beijing Automotive, with a total of five models launched. The dimensions of the Beijing 80 off-road vehicle are 4765mm in length, 1975mm in width, and 2005mm in height, with a wheelbase of 2800mm. The front face of this vehicle features a family-style five-hole grille, with a boxy body design and 20-inch six-spoke alloy wheels, complemented by brake calipers, giving the entire car a highly sporty appearance.

8

4

Share

How to Check a Car's Manufacturing Date?

Methods to check a car's manufacturing date: 1. VIN (Vehicle Identification Number): Each car has a unique VIN, which can be used to determine the manufacturing date. The 10th character (letter or digit) in the VIN indicates the car's manufacturing date. 2. Manufacturing Plate: Most car models have a plate in the engine compartment that displays information such as the model number, engine type, engine displacement, and manufacturing date. 3. Owner's Manual: The car's owner's manual also contains the specific manufacturing date. 4. Car Glass: There is a string of characters on the lower left or right corner of the windshield. For example, ...18 indicates April 2018 (18 represents 2018, and the number of dots before the year is subtracted from 7). If it appears as 18..., it represents October 2018 (the number of dots after the year is subtracted from 13).

8

3

Share

Can ETC be installed in the black area?

The ETC device can be installed on the black dotted area of the windshield, as long as it does not obstruct the driver's view and can sense the detection equipment of the toll station. However, installing it on the black dotted area of the windshield has drawbacks, such as reduced solar charging capability of the ETC device, which may lead to power depletion over time. For small cars, the ETC is generally installed in the upper middle part of the front windshield, while for large vehicles like trucks and buses, the installation position is in the lower middle part. The suitable installation position is at a height not less than 1.2 meters and not higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, it should be installed in the microwave skylight strip. Here are the precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt angle, which reduces the driver's field of vision. If this is not considered during ETC installation, it can increase the driver's blind spots. Installing it on the right side behind the rearview mirror can help avoid obstructing the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas of the windshield and positions that may block the solar panel. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If the tag is removed casually, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Notes for using ETC: The ETC transaction sensing range is 8 meters. To prevent issues with the ETC device of the vehicle in front, maintain a distance of more than 10 meters to avoid automatic sensing and paying for the vehicle ahead. The ETC lane recognizes speeds of up to 20 km/h; driving too fast may result in failure to read the vehicle's device information, leading to payment failure. When using a debit card linked to ETC, insufficient balance may also cause payment failure.

4

5

Share

How Often Should Engine Oil Be Changed During Car Maintenance?

Engine oil change intervals for car maintenance: Fully synthetic oil should be changed every 10,000 kilometers or once a year; semi-synthetic oil should be changed every 7,500 kilometers or every 7 to 8 months; mineral oil should be changed every 5,000 kilometers or every 6 months. The frequency of oil changes depends on many factors, including the quality of the oil used, the driving environment in the region, and the age of the vehicle model. Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in base oil, primarily containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. Engine oil is used for lubricating internal combustion engines, with its main functions being to reduce friction and wear on moving parts and to remove sludge from the engine.

20

3

Share

What is the fuel tank capacity of the Buick GL6 in liters?

How to Replace the Cruze Fuel Filter?

Why Does Brake Fluid Increase?

What engine does the Beijing 80 off-road vehicle have?

How to Check a Car's Manufacturing Date?

Can ETC be installed in the black area?

How Often Should Engine Oil Be Changed During Car Maintenance?

What brand of tires does the Haval H6 use?

How much engine oil should be added to a BMW 525?

How to Use the M+ and M- in an Automatic Transmission?

How to Deal with Airbag Malfunction?