What is the fuel tank capacity of the Buick Excelle?

1 Answers
DeAmir
07/29/25 11:07pm
The 2021 Buick Excelle offers a total of 4 models, all with a fuel tank capacity of 44 liters. The 2021 Buick Excelle is equipped with either a 1.3-liter turbocharged engine or a 1.5-liter naturally aspirated engine, paired with an automatic transmission (AT), and all models feature front-wheel drive. In the same class, the 2022 Nissan Sylphy Classic 1.6XE manual comfort version has a fuel tank capacity of 50 liters, while the 2021 Ford Focus Sedan 1.5L manual version has a fuel tank capacity of 53 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient.
Was this review help?
7
4
Share
More Forum Discussions

Why does the ETC in the car beep?

ETC uses radio frequency for identification. It might beep due to interference from similar signals emitted by places like bus stations. If the ETC device keeps beeping continuously, it indicates an abnormality in the device, and it's best to have an ETC technician inspect it. Below are detailed explanations: 1. ETC: The ETC system communicates wirelessly between the onboard unit installed in the vehicle and the antenna on the toll station lane, exchanging information. It mainly consists of an automatic vehicle identification system, a central management system, and other auxiliary facilities. The automatic vehicle identification system includes the onboard unit (also known as a transponder or electronic tag), roadside unit (RSU), loop sensors, etc. 2. Usage Notes: To ensure more accurate path identification information, users should promptly return the toll card to the electronic tag after swiping it in the manual toll lane.
12
3
Share

What does Audi A6L 50TFSI mean?

The meaning of Audi A6L 50TFSI: 50TFSI represents the g-value, T stands for turbocharging (Audi also uses T to represent supercharging in its vehicle lineup). 50TFSI refers to a 3.0L V6 supercharged direct injection engine with a maximum power output of 220kW. The Audi A6L is a model under FAW-Volkswagen Audi, with body dimensions of 5036mm in length, 1874mm in width, 1466mm in height, and a wheelbase of 3012mm. In terms of exterior design, the Audi A6L's front face inherits the classic family characteristics, presenting a solemn and intelligent image. The hexagonal single-frame grille features horizontally arranged chrome trim strips, combined with the designer's headlight design, creating a wide and flat visual effect for the front face.
12
4
Share

How to adjust the audio system in the 10th generation Accord?

The method to adjust the audio system in the 10th generation Accord is: Press the SOUND button on the central control panel, then use the knob on the right to select FADER. Adjust it until it displays C for front-rear balance, where BAL adjusts the left-right channels, TRE is for treble adjustment, and BAS is for bass adjustment. You can adjust the volume and tone according to personal preference. The 10th generation Accord is a model under Honda, with body dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm. In terms of power, the 10th generation Accord uses three engines: a 2.0L naturally aspirated engine, a low-power version 1.5L turbocharged engine, and a high-power version 1.5L turbocharged engine.
10
5
Share

What does the clutch pedal mean?

The clutch pedal refers to the control device of the clutch assembly in a manual transmission car. It serves as the "human-machine" interaction interface between the car and the driver. During driving lessons or normal driving, it is one of the "five major control components" in car operation and is used very frequently. For convenience, it is commonly referred to as the "clutch." The correct operation of the clutch directly affects the car's starting, gear shifting, and reversing. The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission.
16
3
Share

Can Flood-Damaged Vehicles Apply for Scrapping?

Flood-damaged vehicles can apply for scrapping. Below are the hazards of vehicle flooding: 1. Water ingress is absolutely fatal to a car's engine. Once water enters the engine, at best, the spark plugs may fail to ignite causing immediate stalling, and at worst, it may lead to engine seizure. 2. When a vehicle is submerged, water enters the cylinders through the intake manifold. Due to the incompressibility of water, the piston stroke becomes shorter, resulting in bending or breaking of the connecting rods. In extreme cases, broken connecting rods may pierce through the engine block. 3. The reason a car stalls in water is that the distributor cap gets wet, causing the distributor to lose its normal ignition function. The engine air filter element becomes soaked, increasing intake resistance and allowing water to enter the combustion chamber, making the spark plugs unable to ignite. Restarting the engine under these conditions can easily cause engine seizure.
4
0
Share

Is it necessary to have maintenance done at a 4S shop?

It is necessary to have maintenance done at a 4S shop. The advantages of 4S shop maintenance include: 1. More professional maintenance technology; 2. Better service quality; 3. More professional safety performance. Car maintenance, also known as car servicing, refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car. Car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, etc., aiming to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent faults, and extend the service life. Maintenance items are divided into minor maintenance and major maintenance. Minor maintenance generally refers to the routine maintenance items performed at the manufacturer's specified time or mileage to ensure vehicle performance, mainly including oil and oil filter replacement. Major maintenance refers to the routine maintenance performed at the manufacturer's specified time or mileage, including the replacement of oil, oil filter, air filter, and fuel filter.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.