What is the fuel tank capacity of the Boyue?

2 Answers
PeytonRose
08/29/25 5:44am
The fuel tank capacity of the Boyue is 60 liters. The Boyue is positioned as a compact SUV, with body dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, and a wheelbase of 2670mm. It features front-wheel drive, with a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. The Boyue is equipped with a 1.8T turbocharged engine paired with a 6-speed manual transmission. This engine delivers a maximum power of 120kW and a maximum torque of 250Nm. Additionally, the engine incorporates direct fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block.
Was this review help?
16
5
Share
ValentinaLynn
09/11/25 3:25am
Just drove my friend's Borui on a long-distance trip a couple of days ago and specifically noted its fuel tank capacity of 58 liters. This size is quite mainstream among SUVs in the same class, like the Haval H6 which also has 58 liters. In actual use, it consumes about 9 liters per 100 km in city traffic jams, and a full tank can run over 600 km; on highways with 7.5 liters per 100 km, the range can extend to about 750 km. Don't wait until the fuel light comes on to refuel, as it can easily affect the fuel pump's heat dissipation. I usually refuel when there's a quarter left and ask the gas station attendant to check if the fuel tank cap seal is aging, as a leak can also affect fuel gauge accuracy.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

What does the engine light on the car mean?

When the engine fault light appears on a car, it indicates that there is an issue with the engine that requires inspection. Here are some details about the engine indicator light: 1. Generally, when starting the car, the onboard computer performs a self-check of the entire system, and all indicator lights will briefly illuminate. After the startup is complete, the indicator lights should turn off. 2. If the fault light remains on after the car has started, an inspection is necessary. 3. The engine indicator light is used to display the working condition of the vehicle's engine. If it stays on continuously, it means there is a mechanical fault with the engine that requires repair.
9
1
Share

What are the causes of a blown cylinder head gasket?

The causes of a blown cylinder head gasket are as follows: 1. When installing the cylinder head, the bolts were not tightened in the required sequence or the tightening torque was insufficient, causing the cylinder head gasket to blow during engine operation. 2. Diesel engines operating for a long time under conditions of excessively early fuel injection, leading to an excessively high pressure rise rate during the rapid combustion phase, exceeding allowable limits and resulting in a blown cylinder head gasket. 3. Deformation of the cylinder head or excessive variation in the height of the cylinder liners above the engine block surface, causing some cylinder bores to be inadequately compressed during installation, leading to a blown gasket. 4. Poor manufacturing quality of the cylinder head gasket, deformation of the gasket, or uneven or notched cylinder liner flanges can also cause the gasket to blow.
6
0
Share

How to reset the maintenance light of JAC Shuailing T6?

You can use the universal special diagnostic tool TECH2 to reset it, or manually reset it using the buttons on the right side of the dashboard. Turn off the ignition switch, press and hold both arrow buttons simultaneously, then turn on the ignition switch. After about 3 seconds, release both arrow buttons. The maintenance menu will ask if you want to reset. Press and hold the SET button for more than 3 seconds, press the MODE button, and then turn off the ignition switch to complete the reset. Below is an introduction to the maintenance light: 1. The function of the maintenance light is to record the mileage of important components, similar to a timer in a sprint race, serving as a reminder for car owners and maintenance personnel. 2. If the owner replaces related parts, the corresponding car maintenance light needs to be reset. 3. If the owner replaces related parts but does not reset the light, it will not affect the vehicle's performance, but it will cause trouble for the next replacement of car parts: the exact usage time of the new parts cannot be accurately known.
15
3
Share

How to Determine When to Replace Brake Fluid?

Determining whether brake fluid needs replacement is typically done by measuring its water content. Generally, brake fluid should be replaced every two years, as it is crucial for the proper functioning of a vehicle's braking system. Methods to determine if brake fluid needs replacement are as follows: 1. Water content testing pen: Insert the testing pen into the brake fluid reservoir. If the water content exceeds 3%, the brake fluid should be replaced. 2. Duration of operation: Studies show that for a new car, after 12 months of operation, the water content in brake fluid is about 2%; after 18 months, it can reach 3%; and after five years or more, the water content can be as high as 7-8%. It is recommended to replace the brake fluid if the water content exceeds 3%.
18
4
Share

How to Secure Car Decorations?

Methods for securing car decorations: 1. Hanging method: Decorations on the car rearview mirror are generally fixed by hanging. When choosing a hanging ornament for the rearview mirror, it should not be too long. If the ornament is too long, it will definitely obstruct the view, especially when turning. There are already blind spots in the field of vision, and adding decorations on the rearview mirror can create larger blind spots, posing safety hazards. 2. Double-sided tape fixation: This is the most common and ordinary method of fixation, which works well for securing decorations on the dashboard. It usually doesn't shake. Although using double-sided tape is relatively simple, over time, the tape may stick to the car dashboard, causing contamination. 3. Non-slip mat fixation: A more high-end method of fixation, where car decorations can be secured using non-slip mats. However, prolonged exposure of the non-slip mat may release some harmful substances, requiring timely ventilation. 4. Suction cup fixation: The most common use of suction cup fixation is for phone holders. This method is quite straightforward, but the suction power must also meet certain requirements. If the suction is not strong enough, the decoration may easily fall off.
20
2
Share

How many body colors does the Yusheng S350 offer?

Yusheng S350 offers five body colors for consumers to choose from: Water Ripple Silver, Space Silver, Pearl Black, Bright White, and Sparkling Brown. Below is an introduction to the Yusheng S350: 1. Design: Continuing the concept car's styling, the new vehicle features the latest family-style front fascia with an inverted trapezoidal grille design on the lower part of the front bumper. 2. Powertrain: Equipped with a 1.5T engine delivering a maximum output power of 120KW. 3. Tires: Comes with a set of 16-inch wheels paired with 215/65R16 tires.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.