What is the fuel tank capacity of the Borui in liters?

1 Answers
LeColeman
07/29/25 1:00pm
The fuel tank capacity of the Geely Borui is 70 liters, which is the officially announced data. Owners who have purchased the Geely Borui can also check this information on the vehicle's configuration sheet. The Geely Borui uses 92-octane fuel, with a fuel consumption of 7.3L per 100 kilometers. A full tank of fuel allows the car to travel up to 959 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. The fuel level is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is from the bottom of the tank to the safe limit. There is still some space from the safe limit to the tank opening, which is reserved to ensure that the fuel inside the tank can expand when the temperature rises without overflowing. If the fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked fuel tank capacity.
Was this review help?
8
3
Share
More Forum Discussions

At what voltage does a car battery fail to start the engine?

Car batteries typically fail to start the engine when the voltage drops below 11 volts. Generally, if the load voltage is below 9.5V or the open-circuit voltage is below 11.5V, the engine won't start. Additionally, whether a car can start depends not only on the voltage but also on the battery's load-bearing capacity, which is determined by the internal resistance of the car battery. The functions of a car battery include: 1. Providing power to the starting system, ignition system, electronic fuel injection system, and other electrical components when starting the engine; 2. Supplying power to the car's electrical equipment when the engine is off or at low idle; 3. Acting as a voltage stabilizer for the vehicle's electrical system; 4. Storing excess electricity generated by the alternator.
18
0
Share

How to Clean the Air Conditioning in the New Passat?

New Passat air conditioning cleaning method is: 1. Remove the filter device, open the doors and windows, and set the cold air to high gear; 2. Spray the air conditioning cleaner into the air intake, while closing the air conditioning vents to prevent the cleaner from flowing out during operation; 3. Start the car and let the cleaner circulate in the air conditioning system to ensure that the cleaner circulates to the air conditioning system. The New Passat is a mid-size sedan designed by Volkswagen AG in Germany, with body dimensions of 4933mm in length, 1836mm in width, and 1469mm in height, and a wheelbase of 2871mm. In terms of suspension, the New Passat's chassis suspension structure is front MacPherson and rear multi-link.
19
0
Share

How many colors are available for the new Magotan?

The new Magotan comes in 6 colors: Phantom Black, Dolphin Gray, Caesar Gold, Arabica Brown, Starlight Gold, and Crested Ibis White. Compared to the previous generation, the new model offers more color options, providing consumers with a wider selection. Although the new Magotan's exterior has become more stylish, the paint colors still lean towards a sophisticated and elegant aesthetic. The new Magotan is a mid-size sedan under FAW-Volkswagen, with dimensions of 4865mm in length, 1832mm in width, and 1471mm in height, and a wheelbase of 2871mm. It is a 4-door, 5-seater sedan. In terms of suspension, the new Magotan features a MacPherson strut front suspension and a multi-link rear suspension.
19
1
Share

Is it normal for the front and rear glass dates to be different on a new car?

It is normal for the front and rear glass dates to be different on a new car, as it is impossible for the car glass to be completely identical. This has no relation to whether the car itself has any issues. Additionally, glass from different batches may have different production dates and could be installed on the same vehicle, so there is no need to worry about this. It does not indicate that the car has been involved in an accident or has other problems. Automotive glass is an essential part of a vehicle's body attachments, primarily serving a protective function. There are three main types of automotive glass: laminated glass, tempered glass, and zone-tempered glass. Based on their location, automotive glass can be categorized into four types: windshield, side window glass, rear windshield, and sunroof glass.
11
1
Share

Where is the coolant temperature sensor usually installed?

The coolant temperature sensor is usually installed near the thermostat on the cylinder head at the interface between the engine and the transmission. The function of the coolant temperature sensor is to detect the temperature of the engine coolant and transmit this signal to the engine's electronic control unit (ECU). The ECU adjusts the injection time, ignition timing, and idle speed accordingly based on this signal, which can also serve as a control signal for other systems. The impacts of a faulty coolant temperature sensor include: 1. When the coolant temperature sensor fails, the engine cannot accurately calculate the fuel injection amount, leading to engine shaking or black smoke emission, which affects its power performance and fuel economy; 2. The engine cannot accurately calculate the theoretical idle speed, resulting in unstable engine idle; 3. When the coolant temperature sensor experiences an open or short circuit failure, the cooling fan will operate at high speed.
8
1
Share

Is an overhead crane considered special equipment?

An overhead crane is classified as special equipment. Introduction to overhead cranes: Overhead cranes fall under the category of special equipment, and their alternative name should be bridge cranes. According to the definition of lifting machinery in the "Special Equipment Catalog": Lifting machinery refers to mechanical equipment used for vertical lifting or vertical lifting combined with horizontal movement of loads. Scope requirements: The scope requirements specify that it includes elevators with rated lifting capacity greater than or equal to 0.5 tons; lifting equipment with rated lifting capacity greater than or equal to 3 tons and lifting height greater than or equal to 2 meters. Therefore, a 5.0-ton overhead crane qualifies as special equipment. Certification requirements for overhead crane operation: Age must be 18 years or older, with males not exceeding 60 years and females not exceeding 55 years. Educational requirement is junior high school diploma or higher.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.