What is the fuel tank capacity of the Besturn B30?

Will the Mercedes HOLD function damage the car?

HOLD is activated when the vehicle comes to a complete stop after the first brake application, and then a little more pressure is applied. This creates extra pressure, but its purpose is to send a signal to the pressure sensor in the control unit, which is the signal to activate the HOLD function. It does not have any impact on the brake discs. Related details are as follows: 1. HOLD function: HOLD, when translated directly from English, means to hold or keep (something) in place. Modern Mercedes vehicles come standard with the Electronic Stability Program (ESP), and HOLD is a sub-function under this system, known as the hold function. When this function is activated, the vehicle remains in a braked state even when the brake pedal is released, as long as the transmission is in D, N, or R gear. 2. No wear and tear: Mercedes uses an automatic transmission, and the torque converter (which functions similarly to a manual clutch) includes a lock-up clutch. However, this clutch is only engaged when the vehicle is moving at a steady speed. When the vehicle is stationary, it is disengaged, and the power transmission between the engine and the transmission is achieved through the circulation of hydraulic fluid in the torque converter. Therefore, no wear occurs.

14

1

Share

What is the difference between FAW Leasing and FAW Finance?

FAW Leasing and FAW Finance differ in the following aspects: 1. Transaction form: FAW Leasing allows car owners to make repayments on time through a rental arrangement, while FAW Finance involves car owners obtaining vehicle loans from banks. 2. Ownership: With FAW Leasing, the ownership of the vehicle belongs to the lessor until the car owner has fully repaid the loan; with FAW Finance, the ownership of the vehicle belongs to the car owner. 3. Transaction parties: FAW Leasing involves transactions among the car owner, 4S store, and leasing company, requiring the signing of two contracts; FAW Finance involves transactions between the car owner and the 4S store, requiring the signing of one contract. FAW Leasing Co., Ltd. was registered and established on February 22, 2016, with the Municipal Free Trade Zone Market Supervision Bureau. Its business scope includes financial leasing, leasing operations, and purchasing leasing properties domestically and internationally. FAW Automotive Finance Co., Ltd. is a non-bank financial institution approved by the China Banking Regulatory Commission on December 31, 2011.

5

0

Share

Is the GAC Trumpchi Shadow Leopard Front-Wheel Drive or Rear-Wheel Drive?

"The Shadow Leopard adopts a front-engine, front-wheel-drive layout. The vehicle features a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. Exterior Introduction: In terms of exterior design, the GAC Trumpchi Shadow Leopard employs the "Light Sculpture Surface" design language, offering two styling variants: Sport and Luxury. The body dimensions measure 4700mm*1850mm*1432mm. Specifically, the Sport variant showcases a large hexagonal front grille with vertical slats, accented by two blue polygonal decorative elements resembling fighter jet air intakes, complemented by carbon-fiber-like detailing. Specifications: The Shadow Leopard is powered by GAC's all-new third-generation 1.5TGDI engine under the "JuLang Power" series, delivering maximum power of 130kW and peak torque of 270N·m. Centered on GCCS technology, it integrates twin-scroll turbocharging, top-mounted water-cooled intercooler, high-pressure injection, large-inertia balance shaft, intelligent thermal management, and low-friction technologies, achieving a fuel consumption as low as 5.7L/100km. The transmission boasts a 96% efficiency with a shift time of just 0.2 seconds. In 0-100km/h acceleration tests, it recorded a fastest time of 6.95 seconds."

10

3

Share

Should the 2020 Hongqi H5 use 92 or 95 octane gasoline?

According to the official vehicle manual recommendation, the 2020 Hongqi H5 should use 95 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, the 2020 Hongqi H5 can also refer to the fuel cap, which will indicate the recommended gasoline grade. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is higher, 98 octane gasoline is recommended. However, with the application of some new technologies, the gasoline grade cannot be solely determined by the compression ratio. Engines with high compression ratios can also be tuned to use lower octane gasoline. This is because, apart from the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the 2020 Hongqi H5 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after the current tank is used up. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using a higher octane grade will not cause damage, but the increase in octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This can reduce the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using a lower octane grade can cause engine knocking. This is because the significantly lower octane number reduces the gasoline's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will develop during the upward stroke. This resistance can make the engine run very unstably. If the knocking is mild, it may only increase noise without obvious damage to the engine. However, if noticeable knocking occurs, it indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on the piston and cylinder, and in severe cases, cylinder scoring.

9

0

Share

What Does a Car's First Maintenance Generally Include?

The first maintenance at a 4S shop includes the following aspects: changing the engine oil and oil filter, cleaning the air filter; checking whether the levels of various fluids are normal, inspecting the generator belt and wiper blades for any damage; checking whether the tire pressure is normal and if there are any signs of uneven tire wear, bulging, or damage; inspecting the chassis, including the brake pads, brake discs, connecting rods, ball joints, CV joints, and any scratches, etc.; checking all the switches in the car; ensuring that the lights are functioning properly. Estimated time: Completing all the work takes about 2 hours. Items to bring for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; vehicle purchase invoice, and take the vehicle to the designated first maintenance facility for the service. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven, with the specific time varying by vehicle, generally after driving 1,000 to 3,000 kilometers. It is essential to attend the first maintenance on time, neither early nor delayed. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven under standard loads and at normal speeds as required by the vehicle. The first maintenance time is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever comes first serves as the standard. Here are the essential inspections and replacements that must be completed during the first maintenance of a new car: changing the engine oil, cleaning the three filters—oil filter, fuel filter, and air filter; checking whether the coolant level is within the normal range; inspecting the car's brake system and the level of clutch fluid; checking whether the power steering fluid level is normal and if there are any oil leaks at the pipe connections; inspecting the generator, air conditioning, water pump, and the condition of belts for aging and tension; checking tire pressure and wear, inflating the tires as needed, and rotating them if there is uneven wear. When changing the engine oil, the oil filter must also be replaced. The choice of engine oil must refer to the "Vehicle Use and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car with water: Many people clean their cars during holidays, using water to wash the body and wiping it with a cloth. It is important to note that the interior of the car should not be directly rinsed with water. If the floor mats are dirty, use a vacuum cleaner or remove them to clean with a brush and detergent, dry them, and then put them back. There are many drainage holes under the rubber mats on the cabin floor. If water enters, it will not dry naturally but will flow through the holes to areas like the gearbox, causing corrosion. The best practice is to clean with a vacuum cleaner and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it is recommended to drain the existing antifreeze and refill it with the same brand from the beginning. Since antifreeze brands differ, their chemical properties vary significantly. The additives in one brand may corrode those in another. Different brands of antifreeze use different additives, so they should not be mixed to avoid unnecessary issues. Do not lubricate tire bolts and nuts: When the bolts on a car become rusty, some people apply oil to make them work smoothly again. However, lubricating the bolts and nuts on the wheels can pose a safety risk. When the car is driven at high speeds, the bolts and nuts may loosen or even fall off, leading to driving hazards. Do not press the accelerator when starting an EFI (Electronic Fuel Injection) car: The starter of an EFI car is different from that of a conventional car. Its fuel injection control system can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.

15

5

Share

What is the real range of the Tesla Model 3?

Tesla Model 3 Standard Range version has an actual range of 468 kilometers. Here is an introduction to Tesla: Introduction: Tesla is an American electric vehicle and energy company, founded in 2003 in Silicon Valley by Martin Eberhard and Marc Tarpenning. Content: It mainly produces and sells electric vehicles, solar panels, and energy storage equipment. The founders named the company "Tesla" in honor of physicist Nikola Tesla. Development: In June 2021, Kantar released the "2021 Kantar BrandZ Most Valuable Global Brands Ranking."

11

3

Share

What is the fuel tank capacity of the Besturn B30?

Will the Mercedes HOLD function damage the car?

What is the difference between FAW Leasing and FAW Finance?

Is the GAC Trumpchi Shadow Leopard Front-Wheel Drive or Rear-Wheel Drive?

Should the 2020 Hongqi H5 use 92 or 95 octane gasoline?

What Does a Car's First Maintenance Generally Include?

What is the real range of the Tesla Model 3?

Why Was the BMW 316 Discontinued?

What Does a Three-Way Catalytic Converter Look Like?

Does the Avancier have a hybrid version?

How to Open a Mustang Key to Replace the Battery?