What is the fuel tank capacity of the Bestune X40 in liters?

What is the working principle of an engine?

Engine working principle is the conversion of internal energy into mechanical energy, which is a machine capable of transforming other forms of energy into mechanical energy. Engines include: internal combustion engines, external combustion engines, steam engines, jet engines, and electric motors. The original meaning of an engine refers to a mechanical device that generates power. Engines are suitable for both power generation devices and can include the entire machine of the power unit. An internal combustion engine, specifically a reciprocating piston engine, differs most from external combustion engines in that the fuel is inside it. Common internal combustion engines are gasoline and diesel engines. The engine block forms the skeleton of the engine and serves as the installation base for various mechanisms and systems, housing all major components and accessories of the engine both internally and externally. The engine block must have sufficient strength.

13

4

Share

What lights to use when temporarily parking on the roadside?

Temporarily parking on the roadside requires turning on the hazard warning flashers, which serve as a signal to alert other vehicles and pedestrians that the car is in a special situation. When a motor vehicle breaks down on the road and needs to stop to fix the problem, the driver should immediately turn on the hazard warning flashers and move the vehicle to a place where it does not obstruct traffic. If the vehicle is difficult to move, the hazard warning flashers should remain on, and warning signs should be set up in the direction of approaching traffic to increase the warning distance. If necessary, call the police quickly. In case of sudden heavy rain while driving, it is best not to use the hazard warning flashers. Instead, turn on the width markers and front and rear fog lights, drive slowly, avoid overtaking, and find the nearest exit to leave the highway. This is because the turn signals for overtaking may fail at this time, which can easily cause accidents.

1

4

Share

What Points to Watch for Parallel Parking?

For parallel parking, the first point to observe is the right rear window, the second point is the right rear corner of the parking space, and the third point is the left rear wheel. There are four key observations in parallel parking. After parking, the first observation is the right rearview mirror, the second is again the right rearview mirror, the third is the left rearview mirror, and the fourth is the left front wheel. Maintain slow speed during the process, but avoid stopping completely. When turning the steering wheel quickly, ensure it doesn't affect clutch control—keep movements slow. Parallel parking is part of the second subject in the driver's license test. Parallel parking is becoming increasingly common in urban areas, especially when regular parking spaces are limited. Many places have converted street sides into parallel parking spots.

10

1

Share

How many people can a sedan accommodate?

A sedan can accommodate up to 5 people, as long as it does not exceed the approved passenger capacity. Different vehicle models have varying passenger capacities, and the specific number should be checked against the vehicle's documentation. Article 55, Clause 1 of the Road Traffic Safety Law Implementation Regulations stipulates that passenger vehicles on highways must not exceed the approved passenger capacity, excluding children who are exempt from tickets according to regulations. When the passenger capacity is full, the number of exempt children must not exceed 10% of the approved passenger capacity. The new traffic regulations clearly state that for vehicles other than medium-sized passenger and cargo vehicles, school buses, and hazardous material transport vehicles, exceeding the speed limit by 50% to 70% will result in a 12-point deduction and possible license revocation for a first offense; exceeding by 70% to 100% will result in a 12-point deduction and license revocation; exceeding by more than 100% will result in a 12-point deduction and license revocation.

9

5

Share

Will Only Having 2 License Plate Screws Result in a 12-Point Deduction?

There are two scenarios regarding whether having only 2 license plate screws will result in a 12-point deduction: 1. If the license plate is designed to have only 2 fastening screws, not having 4 will not incur any penalty or fine; 2. However, if the license plate is designed for 4 fastening screws and the owner only installs 2, this is a violation. Failing to install the vehicle license plate as required can result in a one-time 12-point deduction. License plates with 4 fastening screws are more secure and sturdy than those with 2. After heavy rainfall, it's common to find lost license plates in flooded areas. License plates, commonly known as vehicle tags, refer to the plates attached to the front and rear of a vehicle. They are typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration region, and other relevant information.

8

4

Share

What is the sign of insufficient car coolant?

The sign of insufficient car coolant is a thermometer-like or key-shaped indicator. When the coolant is low, the car's engine and radiator lack protection, which affects the heat dissipation efficiency of the radiator and fails to achieve the desired cooling effect. Coolant is an essential fluid for cars and is considered a consumable item. During vehicle use, loss is unavoidable. The normal service life of regular coolant is two to two and a half years, while long-life coolant lasts four to five years. Once the service life is reached, the coolant should be replaced. Functions of car coolant: 1. Anti-freeze: To prevent the coolant from freezing in winter, which could cause the radiator and engine block to crack, the freezing point of the coolant should be about 10 degrees lower than the lowest temperature in the region. 2. Anti-corrosion: The coolant should prevent corrosion of metal parts and aging of rubber components. 3. Anti-scale: The coolant should minimize scale formation during circulation to avoid clogging the pipes and affecting the cooling system's heat dissipation function. 4. Anti-boiling: Coolants that meet national standards typically have a boiling point exceeding 105 degrees Celsius, higher than water's boiling point of 100 degrees, allowing the coolant to withstand higher temperatures without boiling, thus meeting the cooling needs of high-load engines to some extent.

7

0

Share

What is the fuel tank capacity of the Bestune X40 in liters?

What is the working principle of an engine?

What lights to use when temporarily parking on the roadside?

What Points to Watch for Parallel Parking?

How many people can a sedan accommodate?

Will Only Having 2 License Plate Screws Result in a 12-Point Deduction?

What is the sign of insufficient car coolant?

What Are the Effects of Ethanol Gasoline on Cars?

What Are the Hazards of Installing a Dash Cam?

What does it feel like to be in the car during a minor rear-end collision?

Can I drive if my driver's license is lost?