What is the fuel tank capacity of the Bestune B70?

2 Answers
MacJourney
07/24/25 6:53am
The 2022 Bestune B70 has 4 models, all with a fuel tank capacity of 50 liters. The vehicle is equipped with a 1.5-liter turbocharged engine. In the same class, the 2021 Mistra has a fuel tank capacity of 52 liters, the 2021 Borui has a capacity of 70 liters, and the 2022 Trumpchi GA6 has a capacity of 55 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the automaker is measured from the bottom of the tank to the safe level, and there is still some space from the safe level to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing from the tank. If fuel is added up to the tank opening during refueling, the actual refueling amount may exceed the calibrated fuel tank capacity. To check the remaining fuel, the owner can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient.
Was this review help?
18
2
Share
LukasLee
08/11/25 2:39am
As an ordinary car enthusiast, I'm very familiar with the fuel tank capacity of the Bestune B70—it's typically 55 liters. I remember last week's long-distance trip, where I managed to keep fuel consumption around 7L after filling up, achieving a range of nearly 800 kilometers. It's truly worry-free and reliable. For daily urban commuting, I only need to refuel once a week without constantly checking the fuel gauge. It's best not to fill the tank completely—leave some space to prevent gasoline evaporation and waste. I've also checked the fuel cap's seal to ensure the system runs efficiently. The 55-liter capacity is quite standard for mid-to-large-sized cars, with a reasonable design that doesn't add unnecessary weight. On highways, the impressive range avoids frequent stops, saving time and enhancing safety. Overall, this fuel tank size is both practical and economical, suitable for various driving scenarios.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

What to Do When a Card Falls into the Car Door?

When a card falls into the car door, you can: 1. Use a wire to hook out the card that fell under the door; 2. Remove the door panel to retrieve the card. The car door provides a passage for the driver and passengers to enter and exit the vehicle, isolates external interference, and to some extent reduces side impacts to protect the occupants. Car doors can be classified by their opening methods into: 1. Front-hinged doors; 2. Rear-hinged doors; 3. Sliding doors; 4. Upward-swinging doors; 5. Folding doors; 6. One-piece doors; 7. Split doors. The design requirements for car doors include: 1. The maximum opening angle should be controlled between 65 to 70 degrees; 2. There should be no positional interference with other parts during the opening process.
17
0
Share

Where is the Q5 battery located?

Audi Q5 battery is located behind the spare tire near the door with a protective cover. Lift the cover to remove it and you will see the Audi Q5 battery. The steps to replace the battery are as follows: 1. Remove the sound insulation cover and spare tire. 2. Take out the tools and jack. After removing the jack, you can see a fixing screw. Use a 13mm socket to remove it as this is the only screw securing the entire assembly. 3. Use a 10mm socket to loosen the electrodes. 4. Remove the battery and you will see the battery is secured with a front slot and a rear screw-fixed retainer. 5. First secure the battery, then fix the electrodes. Install the cover plate on the four round holes of the battery and reinstall the spare tire sound insulation cover. 6. Since the Q5 has an energy management system, the battery will not be automatically recognized after disconnection, so it must be manually matched.
13
0
Share

Can Tesla charge at all charging stations?

Tesla models sold in China come with a free national standard charging port adapter for owners, so Tesla can charge at all charging stations. Here is some relevant information: 1. Tesla's pure electric vehicles feature very attractive exterior designs, high-tech interior styling, excellent performance, and long driving ranges. 2. Most Tesla vehicles are equipped with two motors, one on the front axle and another on the rear axle. The power delivery method of electric motors differs from internal combustion engines. While typical gasoline or diesel engines need to reach certain RPMs to deliver maximum torque, electric motors do not. 3. When an electric vehicle is stationary and the accelerator pedal is fully depressed, the motor can immediately deliver maximum torque. This power delivery method is particularly suitable for urban road driving. 4. Pure electric vehicles have obvious advantages but also significant disadvantages, such as slow charging speeds, limited driving range, and high battery replacement costs.
15
5
Share

Should the Air Recirculation Be Turned On When Using Car Air Conditioning?

Whether to turn on the air recirculation when using car air conditioning depends on the specific conditions inside the vehicle and the driver's intention. The function of the external air circulation is to replenish fresh air. It uses a fan to draw outside air into the car, meaning the air passage between the inside and outside of the vehicle is open. The function of the internal air recirculation is to block polluted air. Below are relevant details: Function of external air circulation: When external air circulation is activated, the air intake located at the firewall is opened by the air conditioning system's computer. The car's blower then draws outside air through a micro-dust filter into the two heat exchangers (cooling and heating) inside the evaporator. The air, after passing through the heat exchangers, is blown out through the vents. When the vehicle's air conditioning system is in external air circulation mode, the air intake is open, connecting the inside and outside air. For example, if you encounter heavy traffic in the city and turn on the external air circulation, the car will be filled with exhaust fumes because the inside and outside air are connected via the external circulation. Function of internal air recirculation: In internal air circulation mode, the airflow passage between the inside and outside of the vehicle is closed. Without the blower, there is no airflow circulation. When the blower is on, the air drawn in comes only from inside the car, creating an internal airflow cycle. The internal air recirculation primarily and effectively prevents external dust and harmful gases from entering the vehicle, such as when driving through smoke, dust, areas with strong odors, or in heavy traffic, blocking harmful exhaust emissions from vehicles ahead.
10
5
Share

What is the ground clearance of the Nissan Qashqai when fully loaded?

The minimum ground clearance of the Nissan Qashqai is 188mm. Below is the relevant information: 1. The Qashqai is the first product designed by Nissan's European Design Center. Its name is derived from a nomadic tribe living in the desert regions of Iran, meaning 'urban nomad.' 2. The Qashqai is available in five models: Wind, Fire, Thunder, Tiger, and Dragon. Only the Tiger and Dragon models are equipped with a four-wheel-drive system. It features an 'All-Mode 4WD System,' similar to the one in the X-Trail 2.0 model, structurally classified as an on-demand four-wheel-drive system. 3. The engine has a displacement of 2.0 liters, with the model code MR20DE. It delivers a maximum power of 139 horsepower and a maximum torque of 198 Nm, offering a balanced performance.
10
1
Share

How to Remove the Mazda 3 Steering Gear?

The removal method for the Mazda 3 steering gear is as follows: 1. Lift the vehicle on a lift platform. Loosen the dust cover on the power steering gear input shaft and remove the nut from the steering column clamp bolt. 2. Remove the clamp from the clamp bolt, take out the fastening bolt, and detach the steering column from the power steering gear input shaft. Remove the front wheels. 3. Remove the steering tie rod ball joint. Remove the two bolts and safety washers that secure the front subframe center to the vehicle body and discard them. Take off the two front subframe support rods. 4. Lower the rear part of the front subframe. Place a container to collect any spilled fluid. 5. Remove the two bolts that secure the power steering gear return pipe to the front subframe. 6. Disconnect the power steering gear supply pipe and discard the sealing washer. 7. Install the new steering gear and sealing washer.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.