What is the fuel tank capacity of the Baojun 630?

1 Answers
NoahAnn
07/29/25 5:59pm
The fuel tank capacity of the Baojun 630 is 54 liters. In the same vehicle class, the 2021 Qoros 3 3S Sedan 1.5T CVT Leading model has a fuel tank capacity of 40 liters. Fuel tank maintenance is as follows: Drain accumulated water and sediment from the fuel tank, and check for oil leaks at fuel pipe connections and switches. For fuel tank caps equipped with air valves and vapor valves, also inspect whether the vent holes are clear. The filter screen at the fuel filler neck should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be intact to prevent fuel spillage while driving. To check the remaining fuel level, observe the fuel gauge on the right side of the instrument panel marked with E and F. When the needle approaches E, it indicates low fuel, while nearing F means sufficient fuel.
Was this review help?
13
2
Share
More Forum Discussions

How often should the manual transmission fluid be changed for the Volkswagen Lamando?

The replacement interval for the Volkswagen Lamando's transmission fluid is 60,000 kilometers. For the 1.8T model, the replacement capacity is 7 liters. Function of transmission fluid: The primary role of transmission fluid is to maintain the cleanliness of the gear system and to lubricate the transmission components, thereby extending their lifespan. Transmission fluid replacement methods: Currently, there are three mainstream methods for replacing automatic transmission fluid. The first method is similar to an oil change, where the transmission's drain plug is loosened to drain the old fluid before refilling. The second method involves removing the oil pan to drain and refill the fluid. The third method, which is more advanced, uses a circulation machine to replace the automatic transmission fluid.
20
3
Share

Can the Mercedes-Benz C260 lock automatically?

The Mercedes-Benz C260 can lock automatically. You need to touch the sensor button to open or lock the doors. Additionally, if you don't press the lock button, the vehicle will automatically lock after a certain period. This feature is enabled by default: If the car is equipped with this function, the vehicle will automatically lock when the smart key is a certain distance away from the car. The automatic locking feature when leaving the car uses distance sensing to automatically lock the vehicle once you are a certain distance away. Keyless entry function: Many cars come with a keyless entry feature, which also relies on distance sensing. When you are within a certain distance of the vehicle, pressing the button on the door handle will automatically unlock the car. If combined with keyless start, you don't even need to take out the key from entering the car to ignition.
11
1
Share

What is the reason for Audi P030100 fault cylinder 1 misfire?

Audi P030100 fault cylinder 1 misfire reasons are as follows: Fuel system failure: Mainly caused by fuel switch (no fuel delivery), fuel filter (clogged), carburetor (no fuel passage or over-rich mixture), or fuel pipe bending failure. Electrical circuit failure: Short circuit in vehicle electrical components (such as: ignition switch, ignition coil, igniter and magneto failure), or open circuit caused by loose wiring harness connectors. Air pressure failure: Insufficient cylinder compression, improper air filter element intake resistance, engine intake/exhaust system failure, etc. Weather reasons: Normally caused by insufficient cylinder pressure due to excessively cold weather leading to degraded engine oil performance.
19
5
Share

What does it mean when the Honda CRV displays 'Check Starting System'?

When the Honda CRV displays 'Check Starting System', it means the vehicle's anti-theft system cannot detect the signal from the car key. This prompts the driver to check the vehicle's starting system, specifically the one-button start system. In such cases, you can place the key in the sensing area—either on the one-button start key or in the storage slot next to the gearshift—to perform an emergency start, and then proceed to a service station for further inspection. Below is an introduction to the functions of the one-button start system: 1. Automatic Locking: When the driver turns off the engine and leaves the vehicle, simply closing the doors will automatically lock them and activate the anti-theft system. 2. Door Open Alert: If any side door or trunk is not properly closed when leaving, the vehicle will emit a warning sound to remind the driver to secure the doors, preventing potential damage or loss of valuables. 3. Disabling Anti-Theft Alert: During the anti-theft alert, briefly press the unlock button once to unlock the doors; the horn will sound twice and then go silent. The anti-theft horn will not sound, and the lights will flash twice.
9
3
Share

What is the Hood View Method for Curve Driving?

Curve driving using the hood view method refers to observing the hood during the S-curve driving test in Subject 2 of the driver's exam. When turning left, watch the right corner of the hood align with the left line, and when turning right, watch the left corner of the hood align with the right line. Curve driving, commonly known as the S-curve, is a key assessment point in Subject 2 of the driver's test. The requirement is to drive the vehicle along an S-shaped road of specified width without pressing the edge lines, while smoothly controlling the steering. The main trick for Subject 2 curve driving is to master the principle: left point aligns with the right line, and right point aligns with the left line. Below is a supplementary explanation of the hood view method for curve driving: 1. For a left turn, immediately turn the steering wheel one full circle to the left when the left vertex of the hood touches the right yellow edge line. 2. After completing the first turn and preparing for the second right turn, straighten the steering wheel when the right vertex of the hood touches the right yellow line. 3. When the rounded point at the left 1/3 of the hood touches the left yellow line, turn the steering wheel one full circle to the right. 4. Once the front of the vehicle exits the curve, observe the rearview mirror. When the rear of the vehicle is about to exit the curve, straighten the steering wheel and drive out of the curve driving test area.
2
4
Share

What is the actual fuel consumption of the Civic 2.0?

The combined fuel consumption is around 7. When the speed reaches 60 and maintains a steady pace, the fuel consumption can be around 8 (displayed fuel consumption). After the break-in period, it will improve. Reasons for high car fuel consumption: If the tire pressure is insufficient, fuel consumption will increase. If the tire pressure is normal, then check the wear level of the tires. When the tires are severely worn, slipping signs will frequently appear, which will also increase fuel consumption. Solutions for high car fuel consumption: High car fuel consumption is usually accompanied by other abnormal phenomena. In this case, the owner needs to pay more attention and promptly take the car to a 4S store or professional repair shop for inspection and maintenance.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.