What is the fuel tank capacity of the Baojun 360 in liters?

1 Answers
LaElliott
07/30/25 4:39am
2021 Baojun 360 has a total of 7 models, all with a fuel tank capacity of 40 liters. The vehicle is equipped with a 1.5L naturally aspirated engine, paired with either a 6-speed manual transmission or an 8-speed continuously variable transmission. In terms of drivetrain, all models feature front-engine, front-wheel drive. Among vehicles in the same class, the 2021 Wuling Hongguang PLUS has a fuel tank capacity of 53 liters, while the 2021 Oushang Changxing has a fuel tank capacity of 45 liters. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the automaker is measured from the bottom of the tank to the safe fill level, and there is additional space from the safe fill level to the tank opening. This space is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked fuel tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates low fuel, and when it approaches F, it means the fuel level is sufficient.
Was this review help?
12
2
Share
More Forum Discussions

How Often Should the Transmission Fluid in a Magotan Be Replaced?

The transmission fluid in a Magotan should be replaced every 2 years or every 40,000 kilometers driven. The Magotan is a mid-size car launched by FAW-Volkswagen, with an exterior body length of 4866mm, width of 1832mm, height of 1464mm, and a wheelbase of 2871mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm, with a front-wheel-drive configuration. The Magotan has a fuel tank capacity of 66 liters and a trunk capacity of 533 liters. The front and rear tire specifications are 215/60R16, with a front suspension using MacPherson independent suspension and a rear suspension using a multi-link independent suspension.
16
2
Share

Which Lynk & Co Technologies Are from Volvo?

Lynk & Co's CMA architecture technology is co-developed by Geely and Volvo. The chassis and engines used in Lynk & Co vehicles are also from Volvo, but the transmission is not Volvo's. Lynk & Co Models: Lynk & Co's lineup includes the Lynk & Co 01, Lynk & Co 02, and Lynk & Co 03, among others. The Lynk & Co 01 and Lynk & Co 02 are SUVs, while the Lynk & Co 03 is a compact sedan. The Lynk & Co 03 measures 4657 mm in length, 1840 mm in width, and 1460 mm in height, with a wheelbase of 2730 mm. Lynk & Co 03's Engines: The Lynk & Co 03 is equipped with three turbocharged engines: a low-power 1.5-liter turbocharged engine, a high-power 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine.
2
4
Share

How to Remove the Rear Seats of a Magotan?

To remove the rear seats of a Magotan, locate the fasteners at the junctions between the left and right seat cushions and the car floor, then pull them up firmly. The Magotan is a sedan under FAW-Volkswagen, with exterior dimensions of 4866mm in length, 1832mm in width, and 1464mm in height, and a wheelbase of 2812mm. The 1.8TSI engine equipped in the Magotan combines turbocharging technology with direct gasoline injection, delivering high power and excellent torque characteristics. It comes with features such as ESP electronic stability program, multifunctional trip computer, umbrella box with drainage channel, three-way anti-pinch electric sunroof, cruise control system, intelligent wipers with automatic rain sensor, and smart anti-theft keys.
18
0
Share

What is the reason why Wuling Zhiguang is difficult to start when cold but normal when hot?

Wuling Zhiguang is difficult to start when cold but normal when hot for the following reasons: Poor fuel quality: Poor-quality fuel often has poor volatility, especially in winter when the temperature is low. During cold starts, the engine block temperature is low, making it difficult for the fuel to atomize. This affects the proper mixing of fuel injected into the cylinder with air, leading to difficulty in starting or even failure to start. Lower temperatures: The colder it is, the more fuel is required for a cold start. Carbon deposits can significantly affect whether a cold start is successful or not. Carbon buildup in various parts of the engine can negatively impact its normal operation. For example, excessive carbon deposits in the combustion chamber can increase the compression ratio, creating multiple hot spots that lead to pre-ignition and knocking, reducing the engine's lifespan. Carbon deposits on the valves and valve seats can cause the valves to not close tightly, leading to air leaks, difficulty starting the engine, weak operation, and accelerated valve erosion. Spark plug failure: Delayed replacement of spark plugs is another common issue. Cold starts require higher ignition energy, and after a certain mileage, the electrode gap of the spark plug widens. If this gap exceeds the standard, the spark energy produced will be significantly weakened, making it difficult to ignite the air-fuel mixture in the cylinder (commonly known as misfiring), naturally making it very hard to start.
20
1
Share

Can the Inspection Exemption Sticker Be Omitted?

Inspection exemption stickers cannot be omitted and must be affixed to the upper right corner of the front windshield as required by regulations. According to traffic laws, if the inspection compliance label is not displayed, the public security authorities will notify the owner to rectify the situation and impose certain penalties. In severe cases, the vehicle may even be impounded. During the annual inspection, owners are required to drive their vehicles to the inspection line, where professional staff and equipment conduct thorough checks. The inspection includes testing exhaust emissions, examining the vehicle's exterior, chassis, lighting system, and braking system, among others. If any of these checks fail, the vehicle will not pass the annual inspection. The term 'inspection exemption' for vehicles means that within the first six years, the vehicle is exempt from on-site inspection at the testing station. However, it's important to note that 'six-year exemption' does not mean exemption from annual inspections altogether; it only exempts the vehicle from the on-site inspection step at the testing station, which is just one part of the annual inspection process.
10
2
Share

What are the reasons for coolant loss?

Coolant loss primarily occurs due to: 1. Leakage; 2. Excessive natural consumption; 3. Coolant entering the cylinders and being burned or entering the oil pan. Antifreeze serves as the engine coolant, mainly responsible for dissipating heat generated during engine operation. When coolant levels are low, potential causes should be investigated from both external leaks and internal leaks perspectives. The advantages of coolant include freeze protection, cleaning properties, rust prevention, effective cooling performance, and high boiling point - standards that water cannot meet. Adding regular water may lead to scale formation and radiator clogging, making coolant the optimal choice. While water can be used for emergency purposes, it must be drained afterward and replaced with proper coolant.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.