What is the fuel tank capacity of the Audi A8 in liters?

1 Answers
DelAubree
07/29/25 3:17pm
The 2022 Audi A8 offers a total of 5 models, all with a fuel tank capacity of 82 liters. The vehicles are equipped with either a 4.0-liter twin-turbocharged engine or a 3.0-liter turbocharged engine, paired with an 8-speed automatic transmission. All models feature front-engine, all-wheel-drive configuration. In the same vehicle class, the 2022 Mercedes-Benz S-Class has a fuel tank capacity of 76 liters, the 2021 Lexus LS has an 82-liter tank, and the 2021 BMW 8 Series comes with a 68-liter fuel tank. During actual refueling, the amount of fuel may exceed the nominal capacity. This occurs because automakers specify the tank capacity from the bottom of the tank to a safe fill level, leaving additional space between the safe level and the tank opening. This safety margin allows for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel quantity may exceed the nominal tank capacity. To check remaining fuel levels, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel, while proximity to F shows sufficient fuel levels.
Was this review help?
16
5
Share
More Forum Discussions

What procedures are required for having someone else handle the vehicle inspection on your behalf?

To have someone else handle the vehicle inspection on your behalf, you need to bring the relevant documents to the vehicle management office and fill out the motor vehicle annual inspection application form. Below are the details regarding proxy vehicle inspection: 1. Definition: Proxy vehicle inspection refers to having someone else handle the vehicle annual inspection on your behalf. Vehicle annual inspection is a mandatory test for all vehicles that have obtained official license plates and registration certificates. Vehicle annual inspections can promptly eliminate potential safety hazards and encourage enhanced vehicle maintenance. 2. Notes: The annual inspection can be conducted in advance and must not be overdue. Overdue vehicle annual inspections may result in fines. Before the inspection, check for any violation records, as vehicles with violation records will not be inspected.
16
4
Share

What are the required labels for a new car?

Vehicles no longer need to display paper labels, as the electronic vehicle inspection label system has been implemented. New drivers can simply place a "new driver" label on the rear of the vehicle. Introduction to the electronic vehicle inspection label system: 1. Implementation date: Starting from June 20, 2020, the electronic vehicle inspection label service will be available nationwide across China. Electronic vehicle inspection labels will be issued through the unified national internet traffic safety comprehensive service platform, making the application, display, and use of vehicle inspection labels more convenient. 2. Display methods: The electronic vehicle inspection label can be displayed in three ways: online display, offline display, and printed display, providing flexibility for vehicle owners or drivers in different scenarios.
20
3
Share

What is the minimum ground clearance of the Envision Plus?

The ground clearance of the Envision Plus is 190mm. The minimum ground clearance of the Envision Plus refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance generally means better off-road capability, but if the Envision Plus's ground clearance is too high, the stability at high speeds may decrease. The Envision Plus (English name: ENVISION Plus) was designed in 2004. Its body dimensions are 4845mm in length, 1883mm in width, and 1705mm in height, with a wheelbase of 2833mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the Envision Plus's ground clearance is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variation of the vehicle. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban driving with good road surfaces, a vehicle with lower ground clearance may be preferred to enhance stability and comfort. For frequent travel on rough or off-road terrains, a vehicle with higher ground clearance is advisable to avoid scraping or damaging the undercarriage.
7
4
Share

Register the License Plate or Pay the Purchase Tax First?

You must pay the purchase tax before registering the license plate. The vehicle purchase tax is a type of tax levied on entities and individuals who purchase specified vehicles within China. It evolved from the vehicle purchase surcharge and is the fundamental regulation of the current vehicle purchase tax law, implemented since January 1, 2001, under the "Interim Regulations of the People's Republic of China on Vehicle Purchase Tax." The taxpayers of the vehicle purchase tax are entities and individuals who purchase (including buying, importing, self-producing, receiving as gifts, winning as prizes, or obtaining through other means and using personally) taxable vehicles. The taxable scope includes cars, motorcycles, electric vehicles, trailers, and agricultural transport vehicles, with a tax rate of 10%. The formula for calculating the taxable amount is: Taxable Amount = Taxable Price × Tax Rate.
19
0
Share

Which brand does the Binyue belong to?

Binyue is the latest compact SUV under Geely, built on the BMA modular architecture and adopting the latest family-style design language. Here are the relevant introductions of Binyue: 1. In terms of power, Binyue is equipped with the golden power combination of a 1.5TD turbocharged engine jointly developed by Geely and Volvo + 7DCT. 2. The 1.5TD engine adopts direct injection technology, with a maximum power of 130kW and a maximum torque of 255Nm, achieving a 0-100km/h acceleration in just 7.9 seconds. 3. The 7-speed wet dual-clutch transmission has an efficiency of 97% and can complete gear shifts within 0.2 seconds. 4. On the basis of high power performance, Binyue has a fuel consumption of 6.1L per 100km, balancing power and economy, achieving a perfect integration of power and fuel consumption, efficiency and quality.
1
3
Share

How is the rear seating space of the Lynk & Co 05?

The rear seating space of the Lynk & Co 05 is affected by its COUPE design, which reduces headroom. However, engineers have recessed the roof to optimize space, providing three fingers of headroom and two fists of legroom, meeting the needs of general family use. 1. Exterior: The dimensions of the new car are 4592*1879*1628mm, with the same wheelbase as the 01 model at 2734mm. The most distinctive feature of the side profile is the coupe-style design, while the shark gill decorations and extended lines are very similar to those of the 01. The Lynk & Co 05 adopts a different design from previous models, featuring a new "energy groove" taillight arrangement in two vertical rows, with the spoiler lines extending to both ends of the taillights. 2. Powertrain: The new car will be equipped with a 1.5T turbocharged engine (model JLH-3G15TD) and a 2.0T turbocharged engine (model JLH-4G20TD), with maximum power outputs of 180 horsepower and 190 horsepower, respectively. Additionally, the car is expected to offer a high-power 2.0TD engine from Volvo's Drive-E series in the future, delivering a maximum power of 254 horsepower and peak torque of 350 N·m. The transmission is paired with an Aisin 8-speed automatic transmission, and a four-wheel-drive version will also be available.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.