What is the fuel tank capacity of the Audi A4?

1 Answers
JulietteRose
07/30/25 1:18am
The fuel tank capacity of the Audi A4 is 56 liters. The fuel tank is a specialized container in the hydraulic system used to store hydraulic oil or hydraulic fluid, and it is categorized into open-type and closed-type fuel tanks. The Audi A4 is a mid-size sedan with dimensions of 4762mm in length, 1847mm in width, and 1436mm in height, a wheelbase of 2825mm, a fuel tank volume of 54 liters, and a curb weight of 1665kg. The Audi A4 features a five-link independent suspension system both in the front and rear. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 204 PS, a maximum torque of 320 Nm, and a maximum power output of 150 kW. It is paired with a 7-speed dual-clutch transmission.
Was this review help?
8
0
Share
More Forum Discussions

What to Do When the CRV Tire Pressure Light Comes On?

The tire pressure monitoring indicator light usually comes on under four circumstances: 1. A punctured tire causing the tire pressure monitoring light to illuminate: This situation typically involves a very slow leak, making it difficult to immediately identify which tire is affected. In this case, you can use a tire pressure gauge to measure the pressure—2.3 for the front tires and 2.5 for the rear tires. If any tire is underinflated, refill it and then observe the tire pressure warning light. 2. Excessive tire pressure: When any tire exceeds 3.0 bar, it can trigger the tire pressure monitoring light. 3. Prolonged driving with low tire pressure causing the light to come on: If a tire is significantly underinflated, high-speed driving can raise the tire temperature, leading to increased pressure. In such cases, you should promptly pull over to rest or replace the tire with a spare. 4. Low tire pressure due to prolonged lack of inflation: When the pressure drops below 1.8 bar, the tire pressure monitoring light will activate. Therefore, regular checks should be conducted to ensure the tire pressure monitor is functioning properly.
16
4
Share

What are the functions of the front oxygen sensor and rear oxygen sensor?

The front oxygen sensor is mainly used to detect the oxygen content in the exhaust gas, while the rear oxygen sensor is primarily used to check whether the three-way catalytic converter is functioning properly. Below is an introduction to the front and rear oxygen sensors: 1. Installation position: The front oxygen sensor is generally located behind the exhaust pipe, and the rear oxygen sensor is usually positioned behind the three-way catalytic converter. 2. Function: The front oxygen sensor can detect the oxygen content in the exhaust gas and then send the signal to the ECU, which can adjust the engine's air-fuel ratio. The theoretically optimal air-fuel ratio is 14.7:1, and the ECU will maintain the air-fuel ratio near this theoretical optimum. The rear oxygen sensor also sends signals to the ECU, which compares the data from both sensors. If the data from both sensors is the same, it indicates that the three-way catalytic converter is faulty. The three-way catalytic converter can reduce pollutants in the exhaust gas, which is very important for environmental protection.
14
1
Share

How to Replace the Fog Light Bulb on a LINGDONG?

The method for replacing the fog light bulb on a LINGDONG: 1. Take out a flat-head screwdriver and pry from the back of the fog light grille. Then, use the flat-head screwdriver to gently pry open the clips securing the front bumper from the gaps on the front side. Once all clips are pried open, the fog light grille can be removed. 2. You will see two screws fixing the fog light. Use a T25 Torx wrench to remove these two screws. 3. After removing the screws, gently pull upwards on the side where the screws were removed to take out the fog light and replace the bulb. The LINGDONG is a model under Beijing Hyundai. In terms of body dimensions, it measures 4610mm in length, 1800mm in width, and 1450mm in height.
8
5
Share

Which car does Audi C8 refer to?

Audi C8 refers to the 2019 Audi A6L. Below are the relevant details of the 2019 Audi A6L: 1. Body Dimensions: The 2019 Audi A6L has body dimensions of 5050mm in length, 1886mm in width, and 1475mm in height, with a wheelbase of 3024mm. 2. Powertrain: It is equipped with four engine options: 1.8TFSI, 2.0TFSI, 2.5FSI, and 3.0TFSI. The top-tier 50TFSI model still features the EA888 3.0L V6 supercharged engine from the previous generation. 3. Exterior Design: The iconic hexagonal grille is larger, and the lines of the front bumper are sharper, giving the car a more youthful overall appearance. The model offers two design variants: the Elegance trim, which leans towards a business-oriented style, and the Dynamic trim, which is more sporty.
14
0
Share

How to Calculate Car Horsepower?

Horsepower is measured in PS, commonly known as 'horse'. Here is an introduction to calculating car horsepower: 1. Calculation formula: Car horsepower refers to the engine power unit, which is the engine's working capacity per unit time. Power is calculated from torque, and the formula is: Power (w) = 2π × Torque (N-m) × Speed (rpm)/60. After simplification, it becomes: Power (kw) = Torque (N-m) × Speed (rpm)/9549. 2. Introduction to horsepower: Horsepower is a commonly used unit of power measurement in engineering technology. It is a physical quantity that measures the top speed of a car—the higher the horsepower, the higher the top speed. Torque is a physical quantity that measures the acceleration ability of a car—the greater the torque, the better the acceleration performance. Maximum power is usually expressed in horsepower (PS) or kilowatts (kw), with 1 horsepower equal to 0.735 kilowatts.
15
3
Share

What is the penalty for making a U-turn from the second left-turn lane?

Making a U-turn from the second left-turn lane results in a 3-point deduction and a fine. Prohibited U-turn situations are as follows: U-turns are prohibited where there are 'No U-turn' signs or 'No Left Turn' signs: If there is a sign prohibiting U-turns, then U-turns are not allowed at that intersection. The action of making a U-turn is an extension of a left turn, so if there is a sign prohibiting left turns at an intersection, U-turns are also prohibited there. U-turns are prohibited at crosswalks: U-turns are not allowed at crosswalks. If U-turns are permitted at an intersection, you must cross the crosswalk before making a U-turn and cannot make a U-turn on the crosswalk. U-turns are prohibited when there is no left-turn lane: Even in the leftmost lane, if there is no sign permitting left turns, U-turns are not allowed. U-turns are prohibited within the second left-turn lane: When a vehicle is stopped in the second left-turn lane, it cannot make a U-turn. In the absence of any directional signs, vehicles can only make U-turns from the innermost left-turn lane. U-turns are prohibited at solid yellow lines: U-turns are not allowed at solid yellow lines. Even if there is a sign permitting U-turns, you must wait for the green light and cross the stop line to make a U-turn. U-turns are prohibited on highways: Crossing the central divider to make a U-turn on a highway is illegal and will result in a fine and a 12-point deduction. If you miss an exit on the highway, continue to the next exit and leave the highway. Do not attempt an illegal U-turn.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.