What is the fuel tank capacity of the 9.5th generation Accord in liters?

2 Answers
DiAshlyn
09/09/25 3:48am
The fuel tank capacity of the 2016 Accord 9.5th generation Hybrid 2.0L Ruiku version is 60L. It is equipped with a 2.0L naturally aspirated engine and an electronic continuously variable transmission (E-CVT). The drivetrain is front-engine, front-wheel drive. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension. Among vehicles in the same class, the 2021 Camry 2.0E Elite version has a fuel tank capacity of 60L, while the 2021 Regal 552T Elite version has a fuel tank capacity of 55L. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safety limit level. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (empty) and F (full). When the needle is close to E, it indicates low fuel, while nearing F means the tank is nearly full.
Was this review help?
18
0
Share
SanKeegan
09/20/25 8:36am
I remember when I drove the Honda Accord 9.5th generation, its fuel tank capacity was 60 liters. A full tank could last over 500 kilometers for city commuting, and it performed even better on highways for long-distance trips, easily surpassing 600 kilometers. This size was very practical—refueling didn’t take much effort, just a few minutes to fill up, and there was no worry about the fuel weight affecting driving. For daily driving, I got into the habit of refueling once a week, and for long trips, I’d check the fuel gauge in advance to avoid running out midway. Plus, the fuel tank was compact and didn’t take up much space. The owner’s manual clearly stated the 60-liter capacity, which was reliable. Using 92-octane gasoline was sufficient—great value for money, ensuring stable and worry-free range.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

How Long Can Double Iridium Spark Plugs Last?

The service life of double iridium spark plugs primarily depends on the vehicle's mileage. Compared to resistor spark plugs and platinum spark plugs, double iridium spark plugs have the longest lifespan, typically lasting around 80,000 to 100,000 kilometers. With proper maintenance, they can last even longer. Spark plugs are crucial components in a gasoline engine's ignition system. They introduce high-voltage electricity into the combustion chamber, creating a spark across the electrode gap to ignite the air-fuel mixture in the cylinder. Steps to replace spark plugs: Open the engine hood, lift the plastic engine cover, and remove the high-voltage ignition wires. Mark each wire according to its corresponding cylinder position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to fully tighten it. Reinstall the high-voltage ignition wires in the correct firing order, then secure the cover.
10
4
Share

How to Determine a Car's Age Using the Seat Belt?

The method to determine a car's age using the seat belt is: 1. Fully extend the seat belt, and at the bottom, there is an attached label that indicates the car's manufacturing year; 2. If 'meddate' is followed by a combination of letters and numbers, it means the Vehicle Identification Number (VIN) is being used. The tenth digit of the VIN represents the date, cycling every 30 years. The function of the seat belt is to instantly tighten during a vehicle collision or when emergency braking is applied, securing the occupant firmly in the seat to prevent secondary collisions. Reasons why the seat belt may not retract include: 1. The upper slider of the seat belt is too close to the B-pillar, causing misalignment between the belt in the slider and the belt in the retractor, leading to jamming during automatic retraction; 2. The lower roller fails to return to position immediately; 3. There is debris at the friction point between the B-pillar seat belt buckle and the seat belt; 4. The seat belt buckle is damaged.
1
4
Share

How Often Should a Forklift License Be Reviewed?

Forklift licenses issued before 2011 require an annual review every two years, while those issued after July 2011 are reviewed every four years. Each review process takes four days. The regulations for forklift license reviews are as follows: 1. A forklift license is classified as a special vehicle license, issued by the State Administration of Work Safety as the "People's Republic of China Special Operation Certificate." Applications must be processed at the local quality and technical supervision department. According to regulations, forklift licenses must undergo a review every two years. License holders should apply for a review one month before the license expires. Failure to review or failing the review will result in the license being revoked by the authorities. 2. Review requirements: To apply for a forklift license review, the following materials must be submitted to the quality supervision department: (1) Fill out the "Special Equipment Operator License Application Form." (2) Two photos. (3) A copy of the ID card. (4) The original operation certificate. (5) The training completion certificate must be obtained by the applicant in person.
11
1
Share

What is the difference between standard and mid-range configurations?

Standard configurations have fewer features compared to mid-range configurations. Standard configurations include essential electric controls such as power windows, power steering, air conditioning, etc. Mid-range configurations not only include all the features of the standard version but may also add extras like airbags, a sunroof, leather seats, power seats, seat heating, etc. Mid-range configurations offer more features and, accordingly, come at a higher price. More details are as follows: 1. Externally, there is not much difference between low-end and high-end models. Currently, most low-end models are equipped with low-power engines and cost-effective manual transmissions. Although they are priced very affordably, it's undeniable that there is still a significant gap in terms of power output and operational convenience compared to top-end models. 2. Parking sensors are usually available in mid-range and higher configurations; parking sensors are very useful for beginners, assisting in parking; parking sensors can also be installed externally at auto parts stores at the owner's expense; parking cameras are typically found in high-end configurations; they make parking very convenient and provide excellent assistance for inexperienced drivers.
7
0
Share

How Long Can You Drive When the Brake Pad Indicator Light Is On?

The brake pad indicator light can stay on for 80 to 100 kilometers. Its function is to trigger the brake pad indicator light when the brake pads are worn to a certain extent, reminding the owner to replace the brake pads in time. The working principle of brake pads is: by using the friction between the brake pads and the brake drum, as well as between the tires and the ground, the kinetic energy of the moving vehicle is converted into heat energy after friction, thereby stopping the vehicle. The method for replacing brake pads is: 1. Remove the wheel where the brake is located; 2. Remove the bolts of the brake caliper and take off the brake pads; 3. Install new brake pads, tighten the guide bolts, and complete the replacement. The maintenance methods for brakes are: 1. High-temperature resistance protection to prevent corrosion of the brake system; 2. Clean the oil stains on the brake discs, brake drums, and brake pads to maintain good heat dissipation of the brake discs; 3. Regularly replace the brake fluid; 4. Regularly check the thickness of the brake pads or brake shoes.
2
1
Share

What are the exhaust emission standards for vehicle annual inspections?

Starting from May 1, 2019, China implemented new standards for motor vehicle exhaust emission testing. The new standards mainly include OBD (On-Board Diagnostics) inspections. If the vehicle's malfunction indicator light is on or faults are detected during inspection, exhaust emission testing cannot be conducted, resulting in failure to pass the annual inspection. Additionally, the new standards have stricter emission limits and added nitrogen oxide testing for diesel vehicles. The main changes in the new standards are: 1. Tightened pollutant emission limits with more stringent requirements. 2. Added OBD inspection requirements to examine the OBD functionality and fault alarm handling of certain existing vehicles. 3. Added NOx testing methods and limit requirements for diesel vehicles (implemented in November), addressing the lack of standards for NOx emissions from in-use diesel vehicles. 4. Standardized the procedures and items for emission testing, with regulations on visual inspections, OBD checks, pollutant emission testing, and reporting. 5. Standardized the content and time limits for data recording, storage, and documentation. 6. Added relevant requirements for newly registered vehicles, transfer registrations, and roadside inspections.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.