What is the fuel tank capacity of the 8th-generation Accord?

1 Answers
Kendra
07/29/25 5:41pm
The fuel tank capacity of the 8th-generation Accord is 47 liters. Among vehicles in the same class, the 2021 facelifted Excelle has a fuel tank capacity of 44 liters, while the 2022 classic Sylphy has a fuel tank capacity of 50 liters. Fuel tank maintenance is as follows: Drain accumulated water and sediment from the fuel tank, and check for oil leaks at pipe joints and valves. For fuel tank caps equipped with air valves and vapor valves, ensure the vent holes are clear. The fuel filler inlet filter should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be intact to prevent fuel spillage while driving. To check the remaining fuel level, observe the fuel gauge on the right side of the instrument panel, marked with 'E' and 'F'. When the needle approaches 'E', it indicates low fuel, while nearing 'F' means the tank is full.
Was this review help?
8
2
Share
More Forum Discussions

What are the dimensions of the BYD Han?

The length of the BYD Han is 4980mm, the width is 1910mm, the height is 1495mm, and the wheelbase is 2920mm. The following is a related introduction: 1. BYD: BYD is a Chinese automotive brand founded in 1995, primarily producing commercial vehicles, passenger cars, and batteries. Starting with a team of over 20 people, it grew into the world's second-largest rechargeable battery manufacturer by 2003, the same year it established BYD Auto. BYD Auto follows a development path of independent research, production, and branding, aiming to create truly affordable and high-quality vehicles for the people. 2. Wheelbase: The wheelbase is the distance from the center of the front axle to the center of the rear axle. It is the distance between two vertical lines passing through the centers of two adjacent wheels on the same side of the vehicle and perpendicular to the vehicle's longitudinal symmetry plane.
2
0
Share

Where Should the Vehicle Inspection Sticker Be Placed?

The vehicle inspection sticker should be placed in the upper right corner of the vehicle's front windshield. After completing the annual inspection, the inspection sticker must be affixed to prove that the vehicle has passed the inspection. The sticker also displays the inspection date and the vehicle's license plate number. While the sticker is easy to apply, it can be difficult to remove and often leaves residue. To avoid leaving marks, you can try the following methods: Static cling sticker: Purchase static cling stickers online, attach the inspection sticker to the static cling, and then place it on the upper right corner of the front windshield. This makes it easy to remove during the next replacement without leaving any residue. Lamination: Alternatively, you can laminate the inspection sticker and use transparent tape to affix it inside the upper right corner of the front windshield. Vehicle inspection sticker renewal schedule: Operational passenger vehicles: Inspected annually for the first 5 years; every 6 months thereafter. Trucks and large/medium non-operational passenger vehicles: Inspected annually for the first 10 years; every 6 months thereafter. Small and micro non-operational passenger vehicles: Inspected every 2 years for the first 6 years; annually thereafter; every 6 months after 15 years. Motorcycles: Inspected every 2 years for the first 4 years; annually thereafter.
3
1
Share

What to Do When the Fuel Consumption of Haval H2 Keeps Increasing?

You can replace the spark plugs or clean the throttle valve to solve the problem. Here are the relevant details: 1. Haval: Haval is a sub-brand of Great Wall Motors, established on March 29, 2013. The Haval brand, primarily focusing on SUV models, operates in parallel with the Great Wall brand, using an independent logo and having its own product development, production, and service systems, mainly engaged in SUV production and sales. It includes three series: H series, M series, and F series. 2. Spark Plugs: Spark plugs are critical components of the ignition system in gasoline engines. They introduce high voltage into the combustion chamber and generate sparks by jumping the electrode gap, thereby igniting the combustible mixture in the cylinder. They mainly consist of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell.
15
1
Share

Can I request a refund if the 4S store does not provide the vehicle certificate?

You can request a refund if the 4S store does not provide the vehicle certificate, as the vehicle certificate is an important document proving whether the vehicle meets the required standards. The absence of the certificate indicates that the vehicle is not qualified, making it unsellable. Therefore, requesting a refund is reasonable and lawful. Below is relevant information about the vehicle pickup process for consumers: 1. Pay attention to checking the accompanying documents: These include the purchase invoice, vehicle certificate, vehicle conformity certificate, vehicle registration certificate, warranty certificate, etc. These documents are crucial, as some are necessary for later registration, so they must be complete; otherwise, new vehicle registration will be affected. 2. Pay attention to checking the vehicle's appearance: Try to have the vehicle parked outdoors in well-lit conditions to check if the paint is uniform and whether there are any scratches or wear on the paint surface. 3. Pay attention to checking the electrical equipment: New vehicles are generally not allowed for test drives, so after starting the engine, check its condition and test the functions of other electrical equipment, including lights, wipers, air conditioning, multimedia, windows, etc.
10
5
Share

What Are the Consequences of Having the Seat Back Too Upright in Subject Two?

If the seat back is too upright and not adjusted to a suitable position for the driver, it can lead to deviations in observation points or poor control of the clutch pedal, ultimately affecting the test results. Relevant details are as follows: 1. Test Content: Subject Two, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small vehicles (C1/C2), the test items include five mandatory components: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curves). Some regions may also include a sixth item, such as high-speed toll card collection. 2. Large Vehicle Models: For large vehicles (A1/A2/A3/B1/B2), the test items include stake driving, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, curve driving, right-angle turns, passing through a narrow gate, navigating continuous obstacles, driving on undulating roads, making U-turns on narrow roads, as well as simulated scenarios like highways, continuous sharp mountain curves, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.
19
2
Share

Can You Make a U-Turn on a Solid Yellow Line?

You cannot make a U-turn on a solid yellow line. According to the relevant regulations of the "Road Traffic Safety Law of the People's Republic of China": whether it is a single yellow line or a double yellow line, if it is solid, you cannot cross it. Circumstances under which U-turns are allowed: Presence of U-turn signal lights or signs: When there is a U-turn signal light at an intersection, you can make a U-turn when the U-turn indicator is green; if there is a U-turn sign at the intersection or a U-turn indicator on the lane, you can make a U-turn while ensuring the safety of yourself and others. No U-turn signs but left turns are allowed (no prohibition of U-turn signs or markings): Vehicles can make a U-turn at intersections where left turns are permitted and no prohibition of U-turn signs or markings are set. It should be noted that vehicles must proceed according to the left-turn lane signal without affecting the normal driving of other vehicles. If you want to make a U-turn at an intersection with a left-turn waiting area, you can first enter the left-turn waiting area when the straight-through light is green and wait until the left-turn light turns green before making the U-turn. U-turns are allowed at dashed lines: Whether it is a white dashed line or a yellow dashed line, U-turns are permitted. For double yellow lines with one solid and one dashed, check if your side is the dashed line. If it is, you can make a U-turn safely; if it is solid, U-turns are not allowed.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.