What is the fuel tank capacity of the 525 in liters?

Is the left pedal in an automatic car the accelerator or the brake?

In an automatic car, the left pedal is the brake, and the right one is the accelerator. More details about automatic transmissions are as follows: 1. Automatic cars only have two pedals, located below the driver's seat and the console. From left to right, they are the brake pedal and the accelerator pedal, with the gear shift positioned to the right of the central armrest. 2. Generally, automatic cars have six gear positions, arranged from top to bottom as: P, R, N, D, S, L. 3. When starting an automatic car and releasing the handbrake, it is still necessary to press the brake pedal to prevent the engine speed from increasing and causing a sudden start.

10

5

Share

How to operate the one-key start of Lexus UX?

Lexus UX one-key start operation method is as follows: After the driver sits in the driver's seat, press the start button once, at this time the ACC light will turn on. Press the start button again, and the vehicle will perform a self-check. Step on the brake, then press the start button once more to ignite and start the engine. Here is some introduction about the one-key start feature: 1. One-key start is different from traditional mechanical key ignition and conventional starting procedures: Simply press the one-key start button to start or turn off the engine, avoiding the hassle of losing or searching for keys. 2. The one-key start device is part of a smart car: It simplifies the ignition process into a single button operation, and can also be used to turn off the engine.

14

5

Share

What is the recommended replacement interval for the brake fluid in a Sylphy?

Sylphy brake fluid is generally recommended to be replaced every two years or 40,000 kilometers. Brake fluid absorbs moisture, so over time it absorbs water vapor from the air. Excessive water content in brake fluid can cause corrosion damage to the braking system and affect braking performance, hence the need for regular replacement. Below are the functions of brake fluid: 1. Automotive brake fluid has a very low freezing point, ensuring good fluidity in low-temperature conditions; 2. Automotive brake fluid has an extremely high boiling point, preventing vapor lock in high-temperature conditions; 3. When using automotive brake fluid, you will notice minimal quality changes, and it does not cause corrosion to metals and rubber.

15

0

Share

How to Remove Adhesive from Car Film?

Methods to remove adhesive from car film are as follows: Method 1: Evenly apply force to peel off the car sticker, then spray the remaining adhesive with tar remover, wait for about 3 minutes, and wipe it clean with a damp cloth. Method 2: Apply essential balm, alcohol, or hand cream, wait for 5 minutes, and then wipe it clean. Method 3: Use a towel dipped in a small amount of carburetor cleaner or detergent (such as alcohol or diesel) to repeatedly wipe the area where the sticker was. Do not spray carburetor cleaner or detergent directly onto the glass. Carburetor cleaners and detergents are flammable, so be cautious of open flames during use. Method 4: Use a thinner.

1

4

Share

What does AUTO mean in car air conditioning?

AUTO stands for automatic air conditioning. Here is more information about car automatic air conditioning: 1. The automatic air conditioning can automatically adjust to maintain a constant temperature inside the car by sensing the temperature at various points through sensors, with an accuracy of 0.5°C. 2. The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the compartment. It has become one of the indicators to measure whether a car is fully functional. It provides a comfortable environment for passengers, reduces driver fatigue, and improves driving safety. 3. Through the air conditioning display control panel located on the car dashboard, it can display information such as set temperature, interior temperature, exterior temperature, air supply speed, recirculation and air outlet status, and the operating mode of the air conditioning system, allowing the driver to fully understand the working status of the air conditioning system at any time.

8

4

Share

How to Know When to Replace Your Brake Pads?

You can determine whether to replace your brake pads through the following methods: 1. Brake pad thickness. New brake pads are approximately 1.5cm thick, and they should be replaced promptly when worn down to 0.3cm. 2. Vehicle computer alert. Most car dashboards have a brake warning light, and the brake pads should be replaced immediately when this light comes on. 3. Listen for sounds. Brake pads are mostly made of iron and can easily rust after prolonged parking, often accompanied by noise. The noise usually disappears after driving for a while, but if it persists, the brake pads should be replaced immediately. 4. Brake response. If the braking effect significantly weakens during the first half of pressing the brake pedal or the brake feels soft, the brake pads need to be replaced.

1

5

Share

What is the fuel tank capacity of the 525 in liters?

Is the left pedal in an automatic car the accelerator or the brake?

How to operate the one-key start of Lexus UX?

What is the recommended replacement interval for the brake fluid in a Sylphy?

How to Remove Adhesive from Car Film?

What does AUTO mean in car air conditioning?

How to Know When to Replace Your Brake Pads?

What Causes Abnormalities in the Braking System?

What brand of tires does the Nissan X-Trail use?

Is Wheel Balancing Necessary When Rotating Front and Rear Tires?

Which Gear is the Reverse Gear in an Automatic Transmission Car?