What is the fuel tank capacity of the 3.5L Prado in liters?

1 Answers
LaGabriela
07/30/25 6:27am
Toyota Prado has a fuel tank capacity of 87 liters, and the manufacturer recommends using 92-octane gasoline. Before refueling, turn off the engine, locate and press the fuel tank cap release button on the left side of the driver's seat to open the fuel tank cap. The Toyota Prado is a mid-to-large SUV equipped with a 3.5L 280-horsepower V6 engine and a 6-speed automatic transmission. The engine delivers a maximum power of 206 kW and a maximum torque of 365 Nm. The vehicle dimensions are 4840 mm in length, 1885 mm in width, and 1890 mm in height. It features a 5-door, 7-seat SUV body structure and can reach a top speed of 175 km/h.
Was this review help?
15
3
Share
More Forum Discussions

Where is the rearview mirror heating button on the MG6?

The rearview mirror heating switch on the MG6 is located on the center console. There is a square-shaped icon next to the air volume control with several vertical lines—this is the button. The rearview mirror heating function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping and reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is required, as there is an adjustment button on the driver’s side. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within minutes, typically between 35-60 degrees Celsius. Heat is then emitted from the left and right rearview mirrors. As the temperature rises and evaporation occurs, water droplets on the mirror surface shrink, and fog gradually disappears, effectively defrosting and de-fogging the mirror. However, if the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume a significant amount of power. Ensure the car is running when using this function to avoid draining the battery, which could lead to insufficient power for starting the vehicle. Other methods for defogging rearview mirrors include: Opening windows slightly to allow air convection between the inside and outside of the car, reducing temperature differences and gradually eliminating fog. Adjusting the car’s air conditioning to the appropriate setting to blow warm air for defogging.
3
5
Share

What are the procedures and precautions for car purchase?

The process for transferring the registration of a used car involves the following steps: The buying and selling process of a used car can generally be divided into 5 steps: confirming the purchase vehicle (vehicle inspection) → used car evaluation (vehicle evaluation report) → transaction (issuing invoice) → transfer of ownership → insurance transfer (tax and fee changes). To transfer the registration of a used car, you need to go to the vehicle management office in the original vehicle's registered location to complete the transfer procedures. At the vehicle management office, first remove the license plate - inspect the vehicle - pay fees - the transfer applicant signs, and then wait for the temporary license plate. The vehicle's original file is placed in a bag by the original vehicle management office, sealed with a strip, and stamped with the office's seal. It is not allowed to be opened privately during the transfer. Some vehicle management offices may take a few days to provide the file bag, while others may provide it immediately. Therefore, it is essential to clarify this when completing the transfer procedures to avoid unnecessary trouble. The car purchase process and precautions include: First, obtain an objective and comprehensive understanding of the car body. The most direct and reliable information comes from the evaluations of car owners, rather than blindly trusting media and manufacturer advertisements. The main methods for inspection and selection are from the outside to the inside. Check the exterior for any flaws; ensure the gaps on the hood and doors are even, as these cannot be repaired or altered later. Check if the doors and windows open and close smoothly and if the internal control buttons are responsive, reliable, and effective. Start the car while stationary. Pay attention to the ignition time, especially when comparing multiple cars, as the second start will be a "warm" start. After the idle speed stabilizes, listen for any unusual noises from the engine. Press the clutch and listen for changes in the engine sound. Increase the engine speed to 3000 RPM and listen again. Test the audio system and lighting system (including low beam, high beam, width indicator lights, front and rear fog lights, brake lights, turn signals, hazard lights, dashboard lights, reading lights, and trunk lights). Adjust the air conditioning system. Test the windshield wipers and front windshield cleaning system. Check for power steering—turn the steering wheel (at least 180 degrees) both with the engine on and off to feel the difference in effort. Test the brake assist—after turning off the engine, press the brake pedal 3-5 times. If the pedal travel decreases with each press, the assist system is normal; otherwise, there may be an issue. Note that new car brakes are usually soft before breaking in. Before driving, press the brakes several times in a safe area to get a feel for them, otherwise, accidents may occur. Conduct a test drive if possible. Check the included tools.
4
4
Share

How to Remove Paint Spots from Car Surface?

Methods for removing paint spots from car surfaces are as follows: 1. Spray paint remover on the paint-stained area of the car, let it sit for five minutes to allow the paint remover to fully react with the paint, then wipe the area with a cloth; 2. Dip a towel in banana oil and gently wipe the paint spots, which can dilute the paint and effectively clean the spots, then rinse with clean water; 3. Use alcohol or industrial alcohol to remove the paint by dipping a soft cotton cloth in alcohol and gently wiping the paint; 4. Waxing and polishing can be used for treatment, and applying a glaze after polishing can effectively remove paint spots from the car surface.
6
2
Share

What is the fuel consumption of the Roewe RX5 ePlus?

The actual fuel consumption of the Roewe RX5 ePlus is 8.3 liters/100KM. Below is the relevant introduction: Roewe: Roewe (ROEWE) is an automobile brand under the Shanghai Automotive Industry Corporation (Group). The Roewe brand has developed rapidly within four years, with its products covering the mid-size and mid-to-high-end car markets. 'Technological advancement' has become the brand label of Roewe vehicles. Meaning: The Chinese name 'Rong Wei' incorporates traditional Chinese elements, reflecting the spirit of self-improvement and profound Chinese cultural heritage, while also conveying a sense of classic and noble demeanor.
15
2
Share

Should the Edge use 92 or 95 octane gasoline?

Edge should use 92 octane gasoline. Below is an introduction to the relevant content: Gasoline selection: When choosing gasoline, car owners can refer to the gasoline type marked in the vehicle's user manual for refueling. Generally, the marked gasoline type is set based on the engine's compression ratio and has significant reference value. If gasoline is added arbitrarily without considering the engine's compression ratio, it may result in a decrease in the engine's output power. Introduction to 92 octane gasoline: 92 octane gasoline refers to gasoline with an octane rating of 92 and a heptane rating of 8. It is suitable for mid-range vehicles with relatively low compression ratios.
2
5
Share

Should the Tucson use 92 or 95 octane fuel?

Tucson can use 92 octane gasoline. Here is the relevant content introduction: 1. The Tucson is a compact SUV under Hyundai, with a wheelbase of 2670 mm, and dimensions of 4545 mm in length, 1850 mm in width, and 1670 mm in height. The Tucson is equipped with a 1.6-liter turbocharged engine across the entire lineup, with a maximum power output of 130 kW and a maximum torque of 265 Nm. 2. The Tucson features Hyundai's popular light-toned interior design, with a steering wheel that can be adjusted in two directions, allowing drivers to adjust the steering wheel to a suitable position based on their height.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.