What is the fuel tank capacity of the 2021 Sylphy?

1 Answers
StColton
07/28/25 3:24pm
Currently, the 2021 Sylphy has 8 models, among which the classic version has a fuel tank capacity of 50L, while other versions have a fuel tank capacity of 47L. This data is announced by the car manufacturer. The 2021 Sylphy requires 92-octane fuel. The classic version has a fuel consumption of 5.2 to 6.1L per 100km, and a full tank can cover a distance of 819 to 961km; other versions have a fuel consumption of 4.9 to 5.3L per 100km, and a full tank can cover a distance of 886 to 959km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. Generally, the fuel level is observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge on the dashboard usually has 5 to 6 segments. It is recommended to refuel when there are 2 segments left to avoid running out of fuel halfway. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is the volume from the bottom of the tank to the safe limit. There is still some space from the safe limit to the tank opening, which is designed to ensure that the fuel inside the tank can expand when the temperature rises without overflowing the safe space of the tank. If the fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked fuel tank capacity.
Was this review help?
1
5
Share
More Forum Discussions

What are the reasons why an old Passat won't start?

Here are the reasons why an old Passat won't start: Spark plug performance: First, check the spark plugs. Since spark plugs are crucial to the car's ignition system, and the ignition system is key to the engine's operation, the performance of the spark plugs directly affects the vehicle's overall working performance and efficiency. Battery depletion: The characteristic symptom is that the starter begins to turn but lacks sufficient speed or power, and eventually, the starter only clicks without turning. Low temperatures in winter or leaving certain electrical devices on can prevent the vehicle from starting, especially after prolonged short-distance, low-speed use in winter, which can cause the battery voltage to drop below the rated value, making it impossible to start or run normally. If this occurs, call the service center for assistance, jump-start the car, or temporarily start it, but be sure to take the battery to the service center for a recharge afterward. Fuel flow obstruction: The characteristic symptom is no oil pressure in the engine's fuel supply line. This often happens on extremely cold mornings due to long-term dirt buildup in the fuel lines. At very low temperatures, water and debris can mix and block the fuel lines, preventing the car from starting. Emergency solutions: Move the car to a warmer environment, and it may start after a while; or thoroughly clean the fuel lines to resolve the issue.
20
2
Share

What Are the Reasons for High Fuel Consumption in Older Elantra Models?

Here are the common reasons for high fuel consumption in older Elantra models: Insufficient Tire Pressure: If you suddenly notice an increase in your car's fuel consumption, the first thing to check is the vehicle's tires. Verify whether the tire pressure meets the standard and if there is any tire wear. Both insufficient tire pressure and tire wear can increase rolling resistance. Frequent Braking and Starting: It is well known that, apart from factors like car design and the engine, the primary cause of fuel waste is the driver's habits. Frequent hard braking and rapid acceleration are the biggest contributors to increased fuel consumption. An experiment once showed that the same car driven by different drivers resulted in the novice driver's fuel consumption being twice as high as that of the experienced driver. This demonstrates how crucial good driving habits are for saving fuel. High Speed in Low Gear: One of the biggest driving misconceptions is driving at high speeds in low gears. Tests have shown that driving long distances at high speeds in 3rd gear increases fuel consumption by 10% compared to normal driving in 4th gear. Using 2nd gear instead of 3rd gear further increases fuel consumption. Therefore, selecting the appropriate gear based on speed is key to saving fuel.
15
3
Share

What does Jaguar wiper maintenance mode mean?

Jaguar wiper maintenance mode refers to a state where the wipers enter a service position after the vehicle is started, allowing the driver to manually lift both wiper arms to exit this mode. Method to activate Jaguar wiper maintenance mode: First, ensure the vehicle is stationary with the engine hood closed. Turn on the ignition switch. Quickly turn off the ignition switch or remove the key. Within 10 seconds, pull the wiper control lever to the lowest position. The wipers will then enter maintenance mode, and you can manually lift both wiper arms for service. Precautions for using wipers: Avoid operating the wipers on a dry windshield, as this accelerates wear. If the windshield is excessively dirty, first use the washer pump to spray washer fluid for lubrication, preserving the wiper blades' surface integrity. If the wipers fail to clean effectively or leave streaks, replace the wiper blades. If the issue persists after replacement, check the wiper arm's tension. If the tension is reduced, replace the wiper arm as well.
9
0
Share

How is the quality of the Shadow Leopard car?

The quality of the Shadow Leopard car is quite good, and its configuration is also decent. Product Introduction: The GAC Trumpchi Shadow Leopard is a sporty sedan built on the GPMA architecture. It features the brand's latest design language and offers two design styles for consumers to choose from. In terms of powertrain, the new car initially comes equipped with the all-new 1.5T engine from the Juwang Power series, with a potential 2.0T version to be added later. Exterior and Interior: In terms of exterior design, the GAC Trumpchi Shadow Leopard adopts the "Light Sculpture Surface" design language, offering both a sport version and a luxury version. Specifically, the sport version features a large hexagonal front grille with a vertical waterfall-style design, along with two blue polygonal decorative elements resembling fighter jet air intakes, accented with carbon fiber-like materials. The sharp-looking headlights incorporate two vertically arranged LED light strips, officially referred to as "Full LED Sharp Headlights." Additionally, the air deflectors on both sides are adorned with blade-like decorations, enhancing both the sporty personality and aerodynamic performance.
8
3
Share

What is the displacement of Jetta?

Currently, there are three displacement options: 1.4L, 1.5L, and 1.4TSI. Brand Introduction: Jetta is an automobile brand under FAW-Volkswagen Automotive Co., Ltd., a joint venture of the German Volkswagen Group in China. Its first product, the Jetta (Jetta-MK1), was launched in Europe in 1979. Design: All models of the new Jetta brand feature a family-style front face design. The sedan models inherit the classic Volkswagen Jetta's exterior foundation, with the entire brand perfectly embodying German genes and Volkswagen quality. The Jetta was launched in Europe in 1979. Structurally, the Jetta can be seen as a Golf with an added rear trunk, making it a derivative of the Golf.
4
1
Share

Where is the particulate filter located on the Jetta VS5?

The particulate filter on the Jetta VS5 is located behind the three-way catalytic converter and in front of the muffler, surrounded by the front and rear oxygen sensors. Principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the exhaust particulate filter through a dedicated pipe. The densely arranged bag-type filter inside captures the carbon particles on a filter made of metal fiber felt. When the accumulation of particles reaches a certain level, the burner at the end automatically ignites, burning off the captured carbon particles and converting them into harmless carbon dioxide that is then released. Methods to check the particulate filter: Refer to the Owner's Maintenance Manual and Owner's User Manual to see if there is a particulate filter function. Additionally, carefully check the fault codes in the manual to see if there is a "particulate filter" warning light indicator. Check the label on the oil cap; if it clearly states the use of 0W-20 grade oil, it indicates the presence of a particulate filter. Also, inspect the exhaust pipe behind the three-way catalytic converter for a cylindrical section—if present, that is the particulate filter.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.