What is the fuel tank capacity of the 2021 Honda Vezel?

2 Answers
DelaneyRose
07/24/25 8:14pm
The fuel tank capacity of the Vezel is 50 liters. The fuel tank capacity determines the driving range. For two cars with identical engines, the larger the fuel tank, the farther the car can travel. The Vezel is the first SUV under GAC Honda, developed by Honda's new vehicle platform and officially launched on October 25, 2014. Below are the main awards won by the Vezel: 1. April 2014: Won the "Best Debuting New Car Award" and "Most Charming New Car Award" at the 2014 Beijing Auto Show. 2. December 2014: Named "Compact SUV of the Year" in the TopGear China Annual Car Awards by "TopGear Car Test Report". 3. December 2014: Selected as the "SUV with the Most Potential of the Year" in the 2014 Yangcheng Auto Awards.
Was this review help?
5
3
Share
VonSamantha
08/11/25 11:04am
I've been driving the Honda Vezel 2021 model for almost a year now. The official fuel tank capacity is 50 liters, which is quite standard. For daily commuting plus occasional road trips, a full tank lasts about seven to eight days, with an average fuel consumption around 6 liters per 100 kilometers. Driving a mix of city and highway routes, the range can exceed 800 kilometers, making it very practical. Filling up the tank costs around 400 yuan, and it’s hassle-free when fuel prices are stable. If the gas station isn’t crowded, refueling takes just a few minutes. The trunk space isn’t compromised by the fuel tank, so there’s still room for luggage bags, making family trips stress-free. The fuel tank is positioned in the middle of the car, ensuring good balance during turns, and the fuel filler cap is user-friendly—just twist to open. On highways, the ample range provides a strong sense of security, avoiding the hassle of searching for gas stations late at night. Overall, the driving experience is incredibly smooth.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

What are the differences between three-cylinder and four-cylinder cars?

The main differences between three-cylinder and four-cylinder cars are as follows: 1. Fuel consumption: Due to its structural advantages, the three-cylinder engine excels in fuel consumption control. Its smaller size and higher power density result in greater thermal efficiency. The three-cylinder engine also has lower pumping losses due to its structure, and the smaller cylinder size reduces friction and heat dissipation losses during operation. 2. Power performance: In the displacement range of 1.0L-1.5L, the three-cylinder engine has larger single-cylinder volume compared to a four-cylinder engine of the same displacement, providing better low-speed torque. Fewer cylinders mean less mechanical friction, and increasing the number of cylinders can reduce single-cylinder efficiency. Three-cylinder engines offer faster power response and stronger performance compared to four-cylinder engines. 3. Size and weight: Three-cylinder engines are smaller and lighter, reducing overall vehicle weight. Their compact size also saves space in the engine compartment, providing room for electrification components. Four-cylinder engines are larger in size.
6
0
Share

What engine is used in the Jianghuai K5?

Jianghuai K5 has two types of engines: one is HFC4DA1-1C, and the other is 4B2-95C43. Here are the relevant details: The two engines of Jianghuai K5 are: (1) HFC4DA1-1C engine: Maximum power is 68/3600, and maximum torque is 220/1800-2200. (2) 4B2-95C43 engine: Maximum power is 70/3200, and maximum torque is 240/2000. Below is additional information: The Jianghuai K5 engine is a 2.8L turbocharged diesel engine. The vehicle dimensions are 5135×1750×1710, and it is a 4-door, 5-seat pickup truck. It complies with the China IV emission standard.
9
5
Share

Should Chevrolet Cavalier Use 92 or 95 Octane Gasoline?

Chevrolet Cavalier uses 92 octane premium unleaded gasoline. Using other fuels may cause knocking noise, poor-quality fuel, etc., which can lead to reduced engine operating efficiency and affect driving performance. This condition may disappear immediately after the engine warms up. The difference between 92 and 95 octane gasoline: Different compositions: 92 octane gasoline consists of 0.92 isooctane and 0.08 n-heptane, while 95 octane consists of 0.95 isooctane and 0.05 n-heptane. The reason why 95 octane gasoline is slightly more expensive is due to its higher proportion of isooctane; Different power: 95 octane gasoline with higher octane rating is suitable for engines with higher compression ratios. Methods to save fuel: Smooth and steady driving: Compared to braking and accelerating, driving at a constant speed is more fuel-efficient. The economical speed for general cars is between 60-80km/h; Appropriately reduce the use of in-car electrical equipment, such as high-power devices like air conditioning and seat heating; Appropriately increase tire pressure. The pressure can be increased by 0.2bar according to the load, but generally should not exceed the specified pressure when fully loaded.
14
3
Share

What transmission does the Jetta VS5 use?

The Jetta VS5 is equipped with a 6AT transmission with the model code AQ250, which is a product from Aisin. The Aisin AQ250 transmission is a 6-speed automatic transmission commonly used in some models of domestic brands and certain foreign brands, such as Volkswagen compact cars, small cars, Changan, Besturn, Dongfeng, and others. Overall, the Aisin AQ250 transmission is a highly reliable AT transmission. Compared to the AQ160, the AQ250 has an increased maximum torque capacity of up to 310 Nm. AT transmissions are also known as torque converter transmissions because they are connected to the engine via a torque converter. The torque converter consists of three main components: the pump, turbine, and stator. During operation, the torque converter is filled with transmission fluid. Inside the AT transmission, there are planetary gears that enable gear shifting and torque conversion. AT transmissions offer smooth shifting due to their soft connection with the engine, which helps absorb vibrations and shocks. There are two other common types of automatic transmissions: dual-clutch transmissions (DCT) and continuously variable transmissions (CVT). Dual-clutch transmissions are derived from manual transmissions and share a similar structure, but they feature an additional clutch and gear-shifting control mechanism. One clutch in a DCT controls the odd-numbered gears, while the other controls the even-numbered gears. CVT transmissions have a simpler internal structure, consisting of only two pulleys and a steel belt.
17
4
Share

What Causes Jerking When Releasing the Accelerator?

The reasons for jerking when releasing the accelerator include the following: 1. Transmission abnormality: First, check the transmission fluid to see if it is lacking or has deteriorated. 2. Power supply system: Issues with spark plugs or ignition coils, where the high-voltage electricity during acceleration is insufficient, leading to intermittent poor engine performance. 3. Fuel supply system: Carbon buildup or slight clogging in the fuel injectors can cause uneven fuel injection among the four injectors, leading to irregular fuel supply and a jerking sensation. Jerking, impact, or gear hunting in the transmission is not due to internal valve body damage but rather stubborn dirt and impurities inside, especially when these accumulate in the valve body, forming blockages that prevent effective regulation of oil pressure, resulting in jerking, impact, or slippage.
18
4
Share

What is Transmission Oil?

Transmission oil is gear oil for the transmission. The following is an introduction to transmission oil: 1. Transmission oil is a lubricant used to keep the gear system clean, providing lubrication to extend the lifespan of the transmission components. It offers effective lubrication even in low-temperature conditions and reduces oil loss under harsh operating conditions. 2. Most transmission oils can be used in automatic transmissions available on the market. In fact, each automatic transmission design has different technical requirements. Even the same model of transmission configured in different vehicle models may vary in torque, weight, speed, and structure. Therefore, the original manufacturer specifies a dedicated transmission oil, and different transmission oils are one of the factors affecting gear-shifting quality.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.